RESUMEN

We proposed and analyzed an optically isotropic nano-droplet liquid crystal (LC) doped with high k nanoparticles (NPs), exhibiting enhanced Kerr effects, which could be operated with reduced driving voltages. For enhancing the contrast ratio together with the light efficiencies, the LC droplet sizes were adjusted to be shorter than the wavelength of visible light to reduce depolarization effects by optical scattering of the LC droplets. Based on the optical analysis of the depolarization effects, the influence of the relationship between the LC droplet size and the NP doping ratio on the Kerr effect change was investigated.

RESUMEN

In this study, we propose a self-activated radical doping (SRD) method on the catalyzed surface of amorphous oxide film that can improve both the electrical characteristics and the stability of amorphous oxide films through oxidizing oxygen vacancy using hydroxyl radical which is a strong oxidizer. This SRD method, which uses UV irradiation and thermal hydrogen peroxide solution treatment, effectively decreased the amount of oxygen vacancies and facilitated self-passivation and doping effect by radical reaction with photo-activated oxygen defects. As a result, the SRD-treated amorphous indium-gallium-zinc oxide (a-IGZO) thin film transistors (TFTs) showed superior electrical performances compared with non-treated a-IGZO TFTs. The mobility increased from 9.1 to 17.5 cm2/Vs, on-off ratio increased from 8.9 × 107 to 7.96 × 109, and the threshold voltage shift of negative bias-illumination stress for 3600 secs under 5700 lux of white LED and negative bias-temperature stress at 50 °C decreased from 9.6 V to 4.6 V and from 2.4 V to 0.4 V, respectively.

RESUMEN

In this paper, we propose a color transparent liquid crystal (LC) mode that can control the properties of the color gamut and transparency in a single panel. To achieve high transmittance in the transparent LC mode, a reactive mesogen (RM) with embedded color dichroic dyes was applied instead of a color filter. Basically, the LC mode applied a 3-terminal electrode structure to switch between the transparent LC mode and the conventional color LC mode. Depending on the direction of the applied voltage, we can operate both the color mode and the transparent mode in a single panel, and modulate the transparency and color purity of the cell through appropriate voltage control. In the experiments, we confirmed that the transmittance and the color gamut of the cell were 39.4% and 2% in the transparent LC mode and 14.9% and 34% in the color LC mode, respectively. Modulation of the color gamut and transparency between each LC mode are also demonstrated in the paper.

RESUMEN

The outdoor readability of the most popular portable liquid crystal display (LCDs) viz. fringe field switching has been addressed both in single and dual cell gap transflective devices. The devices use dual orientation, such as, homogeneous alignment in transmissive (T) part and 64° twisted alignment in reflective (R) part. The dark states of the proposed devices are achieved by controlling phase retardation in T part and polarization rotation in R part and the white state is realized by rotating optic axis of liquid crystal and removing phase retardation in T and R parts, respectively. The devices show high light efficiency without requiring any optical compensation films, exhibiting strong potential for portable display applications.

Asunto(s)

Presentación de Datos , Cristales Líquidos/química , Refractometría/instrumentación , Campos Electromagnéticos , Diseño de Equipo , Análisis de Falla de Equipo , Cristales Líquidos/efectos de la radiación

RESUMEN

Conventional transflective liquid crystal displays (LCDs) with single cell-gap requires optical compensation films or patterned retarders to balance the optical path-length difference between transmissive and reflective regions. In this paper, novel single cell-gap transflective LCDs driven by fringe electric field without using the compensation film or in-cell retarder have been proposed. The liquid crystal director is aligned parallel to analyzer but makes an angle of 45° with respect to analyzer in reflective region. In addition, the surface pretilt angle in the reflective region is controlled by vertical field and polymerization of an UV curable reactive mesogen at the same time and thus, the effective cell retardation in the reflective region becomes smaller than that in transmissive region. Consequently, without using any compensation film or in-cell retarder, the single cell-gap and single-gamma transflective LCD with high performance is realized.

RESUMEN

All conventional viewing angle switchable liquid crystal displays with pixel division have drawback in light efficiency because the sub-pixel that controls viewing angle does not transmit the incident light at normal direction. In this paper, we propose new viewing angle controllable homogeneously aligned liquid crystal display in which the pixel is composed of red, green, blue, and white pixels. The colored pixels are driven by fringe-field switching and the white pixel is driven by complex field. In wide-viewing angle mode, the liquid crystal (LC) directors in all pixels rotate in plane, contributing to high transmittance. In narrow-viewing angle mode, the LC directors in color pixels rotate in plane for light transmission while the LC directors in white pixel can rotate or tilt upward by simultaneous fringe and vertical electric field. The high tilted LC directors generate light leakage in oblique directions which can be utilized for viewing angle control and also transmission at normal direction for image expression. The proposed device overcomes the long standing problem of transmittance sacrifice in the conventional devices.