RESUMEN

Surgical augmentation methods have been introduced to the Modified Broström (MB) technique to support native anterior talo-fibular ligament (ATFL) healing and function. This study aimed to investigate the isolated biomechanical performance of common MB augmentation elements, including allograft, suture tape, and copolymer, compared to native ATFL. Six cadaveric feet were dissected, isolating the ATFL from all surrounding soft tissue. The fibula and talus were clamped on the testing frame so that the ligament was in line with the load cell. Six samples per augment group were fixed on a test frame with a gauge length of 20 mm to replicate ATFL length. All samples were pulled to failure at 305 mm/min. Biomechanical outcomes included stiffness, elongation, and ultimate load. Mean ± standard deviation was reported. Stiffness was highest for suture tape (246.4 ± 52.1N/mm), followed by allograft (114.2 ± 26.2 N/mm), native ATFL (78.6 ± 31.8 N/mm), and copolymer (9.4 ± 2.9 N/mm). Significant differences in stiffness were observed between all groups except when comparing ATFL stiffness to allograft (P = 0.086). Copolymer resulted in significantly larger elongation at ultimate load compared to native ATFL, suture tape, and allograft (P < 0.001). Elongation at ultimate failure was highest for copolymer (30.0 ± 8.7 mm) and significantly greater than all other groups (P < 0.001). Ultimate load was highest for suture tape (544.1 ± 59.7 N), followed by native ATFL (338.5 ± 63.7 N), allograft (308.3 ± 98.5 N) and copolymer (146.7 ± 8.9 N). Suture tape ultimate load was significantly greater than copolymer (P < 0.001). Isolated biomechanical data of augment materials can be utilized by foot and ankle surgeons when considering appropriate ligament augmentation options. Level of clinical evidence 5, controlled laboratory study.

RESUMEN

Background: Low-profile suture passers have been introduced to facilitate thoracolumbar fascia closure in minimally invasive spine (MIS) surgery. The purpose of this study was to evaluate the closure time of a modern suture passer to a conventional curved need for MIS fascia closure in a cadaveric model. Methods: Six clinicians specializing in orthopedic spine surgery were recruited for the study and randomly assigned 1 cadaveric torso. Subcutaneous tissue was resected at L4-L5, replicating MIS surgery, followed by placement of a 60×18-mm or 100×18-mm tubular retractor for access. Clinicians were required to close the fascia with three unknotted, simple interrupted sutures using a swaged curved needle or suture passer (Spine Scorpion™, Arthrex, Inc., Naples, FL). The completion time was recorded, starting immediately before suturing and ending after the last pass. A time cutoff of 10 min was implemented in consideration of reasonable operating room time, and the number of achieved suture passes (of 6) were recorded. Clinicians were asked to qualitatively grade ease of use in relation to prior fascial closure experience per a 0-5 scale, where 0 is impossible and 5 is easiest. Results: The mean change in fascial closure completion time (Δ) was significantly reduced with the Spine Scorpion compared to the curved needle with the 60×18-mm retractor (Δ=5.80 min; 95% CI, 2.92-8.67 min; p=.004) and 100 × 18-mm retractor (Δ=5.28 min; 95% CI, 2.76-7.80 min; p=.003). Full closure was achieved within the time limit for all trials of the Spine Scorpion, while the standard needle achieved full closure in 67% (4 of 6) and 50% (3 of 6) of trials with the 60 × 18-mm and 100×18-mm retractors, respectively. Median ease-of-use scores with the 60×18-mm and 100×18-mm retractors, respectively, were 4.5 (range, 4-5) and 4.5 (range, 3-5) for the Spine Scorpion, and both 1.0 (range, 1-2) for the curved needle. Conclusion: Results from this laboratory investigation using a suture passer for thoracolumbar fascia closure show a significant reduction in closure time and completion of the procedure compared to a conventional curved needle.

RESUMEN

PURPOSE: To compare the postoperative side-to-side laxity and short-term clinical outcomes of patients who received primary anterior cruciate ligament (ACL) repair with suture tape augmentation, acute anterior cruciate ligament reconstruction (ACLR) with suture tape augmentation performed within 8 weeks of injury (ACLRacute), or ACLR beyond 8 weeks of injury. METHODS: After institutional review board approval was obtained, 100 patients were enrolled in this prospective trial: 34 primary ACL repair with suture tape augmentation, 33 ACLRs performed within 8 weeks of injury (ACLRacute), and 33 ACLRs. Patients were allocated to ACL repair if a proximal avulsion was present with good tissue quality (Sherman type 1), confirmed by intraoperative diagnostic arthroscopy. Preoperative side-to-side anteroposterior knee laxity was assessed with KT-1000 arthrometer, and patient-reported outcomes (PROs) including the visual analog scale, Marx activity scale, Veterans RAND 12-item health survey (VR-12 physical & mental), Single Assessment Numeric Evaluation, Knee Injury and Osteoarthritis Outcome Score survey subscales, and range of motion were collected. These objective and subjective measures were repeated at regular intervals postoperatively through 2 years. Minimal clinically important difference calculations were performed assessing postoperative PRO changes at 2 years compared with preoperative. RESULTS: The average time from injury to surgery was 5.03 ± 1.2 weeks for the ACL repair group, 5.09 ± 0.74 weeks for the ACLRacute, and 43.22 ± 33.5 weeks for the ACLR group. Postoperatively, the KT-1000 side-to-side laxity difference for 30 lbs was determined to be 0.1 ± 0.37 (95% confidence interval [CI] -0.7 to 0.8) for ACL repair versus ACLR (P < .0001), -0.8 ± 0.35 (95% CI -1.5 to -0.1) for ACLRacute versus ACLR (P < .0001), and 0.8 ± 0.40 (95% CI 0.0-1.6) for ACL repair versus ACLRacute (P < .0001). The data reveal ACL repair and ACLRacute are noninferior to ACLR at 2-year follow-up. The postoperative difference from baseline for all PROs demonstrated improvement for all PROs. Magnetic resonance imaging at 1 year revealed tissue healing for the 3 ACL injury treatment groups. CONCLUSIONS: Patients who underwent ACL repair of proximal tears with suture tape augmentation or ACL reconstruction within 8 weeks from injury resulted in noninferior side-to-side knee laxity, comparable PROs, and similar range of motion at 2-year follow-up compared with ACLR. LEVEL OF EVIDENCE: Level II, prospective comparative study.

RESUMEN

BACKGROUND: Although double-row suture-anchored (DRSA) techniques for Achilles insertional tendinosis has proven successful, a reoccurring failure mode not yet addressed is suture tearing through the tendon. This study aims to address suture tearing by incorporating a rip-stop element. Authors hypothesized that the Rip-Stop group would demonstrate increased strength compared with more traditional techniques. METHODS: 12 paired cadaveric feet were used in this study (n = 24). One sample from each pair was assigned to receive the standard double-row (SDR) Achilles repair with 4.75-mm knotless anchors (n = 12). The control's matched sides were divided between 2 DRSA bridge groups: modified double-row (MDR) bridge with 3.9-mm anchors or rip-stop double-row (RS-DR) bridge repair with soft proximal anchors and 3.9-mm anchored distal row. In neutral position, specimens underwent 1000 cycles (20-100 N) followed by load to failure. Displacements, stiffness, ultimate load, and failure mode were recorded. RESULTS: RS-DR had the lowest initial displacement values followed by SDR and MDR (1.3 ± 0.4, 2.7 ± 1.4, and 3.2 ± 1.3 mm, respectively). Significance was detected when comparing initial displacement of RS-DR to MDR (P = .038). Cyclic displacement was lowest for RS-DR, followed by MDR and SDR (1.6 ± 0.9, 2.2 ± 1.1, and 4.5 ± 3.2 mm, respectively). Cyclic stiffness was similar for RS-DR and MDR (89.1 ± 24.6 and 81.9 ± 5.6 N/mm, respectively). RS-DR ultimate load (1116.8 ± 405.7 N) was statistically greater than SDR (465.6 ± 352.7, P = .003). CONCLUSION: RS-DR-repaired specimens demonstrated a decrease in displacement values and increased ultimate load and stiffness when compared to other groups. Results of this cadaveric model suggest that the addition of a rip-stop to DRSA Achilles repair is more impactful than anchor size. Limitations include that this was a time-zero biomechanical study, which cannot simulate the performance of the repairs during postoperative healing and recovery. CLINICAL RELEVANCE: A rip-stop technique for Achilles repair effectively improves dynamic mechanical characteristics and may mitigate suture tearing through tendon in a patient cohort.

Asunto(s)

RESUMEN

BACKGROUND: Ischiofemoral impingement (IFI) is understood to be a pain generator in the deep gluteal space. Femoral position is known to influence the ischiofemoral space (IFS), but there has been no study examining the effect of sagittal pelvic tilt on the IFS. The purpose of this study was to determine whether changes in pelvic tilt in the sagittal plane lead to changes in the dimensions of the IFS. MATERIALS AND METHODS: Five fresh frozen cadavers (10 hips) were used for this anatomic study. The specimens were skeletonized and placed in the prone position with the pelvis fixed to a custom-built hinged table. A digital inclinometer was used to tilt the pelvis -10°, 0°, and 10° simulating posterior, neutral, and anterior pelvic tilt, respectively. Digital calipers were used to measure the dimensions of the IFS in all three positions of sagittal pelvic tilt. RESULTS: Changes in pelvic tilt resulted in significant changes in the dimensions of the IFS. Mean IFS dimensions measured 29.3±9.7 mm, 37.2±9.0 mm, and 24.3±9.2 mm in the neutral, anterior, and posterior pelvic tilt positions, respectively (P<.0001). CONCLUSION: Changes in sagittal pelvic tilt influence the dimensions of the IFS, with posterior pelvic tilt noted to significantly decrease the IFS when compared with neutral and anterior pelvic tilt. These findings suggest that further evaluation of sagittal spinopelvic balance in the etiology of symptomatic IFI may be warranted. [Orthopedics. 2024;47(3):167-171.].

Asunto(s)

RESUMEN

This comprehensive literature review underscores the potential of stem cell transplantation (SCT) as a therapeutic intervention for multiple sclerosis (MS). By amalgamating evidence from various sources, including randomized controlled trials (RCTs), observational, retrospective, and comparative studies, this review offers a holistic understanding of SCT's effectiveness, safety, and feasibility in diverse contexts of MS management. SCT has shown promise in mitigating disease activity and progression, particularly in relapsing-remitting MS (RRMS). RCTs like the high dose immunoablation and autologous hematopoietic stem cell transplantation in MS (ASTIMS) versus mitoxantrone therapy in severe multiple sclerosis and multiple sclerosis international stem cell transplant (MIST) trials reveal SCT's capacity to reduce new lesion occurrences and inflammatory activity. However, variability exists in disability score improvements among these studies. Observational and retrospective investigations further affirm SCT's potential, highlighting decreased relapse rates, enhanced expanded disability status scale (EDSS) scores, and a noteworthy proportion of patients achieving no evidence of disease activity (NEDA). The initial literature search using all of the search items produced a total of 3,636 articles. After title, abstract, and article type screening and article retrieving, 147 articles were assessed for eligibility using the inclusion criteria. At the end of the literature search, 37 articles met the eligibility criteria. They were included in our review according to preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. Patients treated with hematopoietic stem cell transplantation (HSCT) present lower progression and relapse rates, suppression of inflammatory activity, and a greater reduction in T2 lesions on MRI than those treated with disease-modifying therapies (DMTs). In summary, while SCT presents promise as a therapeutic option for MS, its deployment should be tailored to individual patient characteristics, disease stages, and responses.

RESUMEN

Various metrics have emerged for assessing scientific impact, most of which are based on complex calculations and, in many cases, are not freely available. Moreover, most of these metrics are not intended for assessing the scientific impact of research groups. Cumulative group metrics are proposed as an efficient and cost-effective strategy for measuring group scientific impact. Materials and methods: The authors collected peer-reviewed output in 2020 from two academic orthopedic surgery departments [University of Michigan (UM) and Mayo Clinic Rochester (MC)] and one medical device research department [Arthrex Inc. (AI)]. The sites evaluated the Cumulative Group Number of Publications (CGNP), Cumulative Journal Impact Factor (CJIF), Cumulative CiteScore (CCS), Cumulative SCImago Journal Rank (CSJR), and Cumulative Source Normalized Impact per Paper (CSNIP) for the three institutions. Results: In 2020, UM published 159 peer-reviewed studies, MC published 347 peer-reviewed studies, and AI supported 141 publications. The UM publications achieved a CJIF of 513, a CCS of 891, a CSJR of 255, and a CSNIP of 247. The MC publications achieved a CJIF of 956, a CCS of 1568, a CSJR of 485, and a CSNIP of 508. AI-supported publications achieved a CJIF of 314, a CCS of 598, a CSJR of 189, and a CSNIP of 189. Conclusion: The presented cumulative group metrics are an effective tool to assess the scientific impact of a research group. The cumulative submetrics can further evaluate research groups compared with other departments due to field normalization. Department leadership and funding agencies can utilize these metrics to evaluate research output quantitatively and qualitatively.

RESUMEN

OBJECTIVE: To offer an adjunctive imaging tool to MRI for evaluating tape suture related rotator cuff repairs. MATERIALS AND METHODS: A two-part pilot study was performed to assess visibility of tape suture following imaging with various modalities. Institutional research ethics board approval was obtained prior to cadaveric studies. Two tape sutures, FiberTape® and TigerTape®, were evaluated in each experiment. The first experiment assessed the tape suture's presence in a gelatin mold following exposure to X-ray, ultrasound, computed tomography (CT), and magnetic resonance imaging (MRI) without contrast. The second experiment assessed tape suture's visibility in a cadaveric shoulder model following a standard of care, double-row, transosseous equivalent rotator cuff repair. The same imaging protocols and equipment were used for each part of the study with the addition of MR arthrography-tailored images on the cadaveric specimen. All images were assessed by a musculoskeletal trained radiologist. RESULTS: The gelatin study demonstrated that the tape suture was visible via ultrasound only. X ray, CT, and MRI did not show tape suture material. In the ultrasound component of the cadaveric study, distinct echogenic textural detail of the tape suture was easily identified, compatible with the simulated rotator cuff repair. X ray and unenhanced CT did not show the tape suture material or the rotator cuff. MRI without intraarticular gadolinium contrast did not adequately image the suture tape; however, faint artifact in the repair region was visualized. MRI with intra-articular contrast did not show the tape suture material in detail; however, the intraarticular gadolinium did provide an advantageous background of high T1 signal that contrasted with the cuff/suture construct. CONCLUSION: Ultrasound proved to be an effective imaging modality to visualize tape suture in both the gelatin and cadaveric parts of the pilot study. Ultrasound may be a useful tool to evaluate post-operative tape suture-related repairs in patients that cannot obtain MRIs or when the MRI findings are equivocal.

Asunto(s)

RESUMEN

Plant extracts may represent an ecofriendly alternative to chemical fungicides to limit aflatoxin B1 (AFB1) contamination of foods and feeds. Mate (Ilex paraguariensis), rosemary (Romarinus officinalis) and green tea (Camellia sinensis) are well known for their beneficial properties, which are mainly related to their richness in bioactive phenolic compounds. AFB1 production is inhibited, with varying efficiency, by acetone/water extracts from these three plants. At 0.45 µg dry matter (DM)/mL of culture medium, mate and green tea extracts were able to completely inhibit AFB1 production in Aspergillus flavus, and rosemary extract completely blocked AFB1 biosynthesis at 3.6 µg DM/mL of culture medium. The anti-AFB1 capacity of the extracts correlated strongly with their phenolic content, but, surprisingly, no such correlation was evident with their antioxidative ability, which is consistent with the ineffectiveness of these extracts against fungal catalase activity. Anti-AFB1 activity correlated more strongly with the radical scavenging capacity of the extracts. This is consistent with the modulation of SOD induced by mate and green tea in Aspergillus flavus. Finally, rutin, a phenolic compound present in the three plants tested in this work, was shown to inhibit AFB1 synthesis and may be responsible for the anti-mycotoxin effect reported herein.

Asunto(s)

RESUMEN

Purpose: To evaluate the depth of penetration of manufacturer-recommended bipolar radiofrequency (BRF) output in healthy hyaline cartilage. Methods: Two matched knees from a bovine specimen were harvested for immediate testing. BRF probes were used to treat the articular cartilage in a hydrated noncontact technique employing a 1-mm spacer on patellar, condylar, and trochlear surfaces. Two manufacturer-recommended ablate power settings were evaluated to analyze the effect of varying power outputs on the depth of penetration. Surfaces were randomized and treated with BRF ablate setting 3 (AB-3), 4 (AB-4), or left untreated as a control (12 grids each). Slices were extracted from treatment zones and subjected to fluorescein diacetate and propidium iodide viability stains and analyzed with confocal light microscopy. A general linear model was used to determine whether variables such as ablation setting, cartilage location, and side significantly influenced depth of penetration (DoP) and cartilage thickness (Minitab 19, Chicago, IL). When significance was noted (P < .05), a post hoc-Tukey test was used to investigate specific differences. Results: AB-3 had a 50.9% lower mean DoP than AB-4 (P = .006). The mean DoP was 237.9 ± 140.6 µm for AB-3 and 484.1 ± 267.0 µm for AB-4. Median DoP values were 243.2 ± 149.5 µm for AB-3, 51.2% lower than the 498.4 ± 286.0 µm for AB-4. The mean maximum DoP for AB-3 was 302.4 ± 167.8 µm, 50.6% lower than AB-4 value of 611.6 ± 299.1 µm. Analysis of the cartilage thickness confirmed there was no difference in overall cartilage thickness used for AB-3 versus AB-4 testing (P = .953). Conclusions: The RF probe ablate power setting AB-3 demonstrated significantly less articular cartilage depth of penetration than the AB-4 setting in a healthy bovine model. Clinical Relevance: Debridement of chondral lesions with plasma BRF is of clinical interest. The presented study adds basic science information for those considering performing this technique.

RESUMEN

BACKGROUND: AO Spine RECODE-DCM (Research objectives and common data elements for degenerative cervical myelopathy) has highlighted that the subjective disability reported by people living with DCM is much broader than routinely considered today by most professionals. This includes a description of tremor. The objective of this review was to study the incidence and possible aetiology of tremor in degenerative cervical myelopathy (DCM). METHODS: A systematic review registered in PROSPERO (CRD42020176905) was conducted in Embase and MEDLINE for papers studying tremor and DCM published on or before the 20th of July 2020. All manuscripts describing an association between tremor and DCM in humans were included. Articles relating to non-human animals, and those not available in English were excluded. An analysis was conducted in accordance with PRISMA and SWiM guidelines for systematic reviews. RESULTS: Out of a total of 4402 screened abstracts, we identified 7 case reports and series describing tremor in 9 DCM patients. Papers were divided into three groups for the discussion. The first group includes DCM correctly identified on presentation, with tremor as a described symptom. The second group includes cases where DCM was misdiagnosed, often as Parkinson's disease. The third group includes a single case with a previous history of DCM, presenting with an otherwise unexplained tremor. This grouping allows for the clustering of cases supporting various arguments for the association between tremor and DCM. CONCLUSION: DCM can be associated with tremor. The current evidence is restricted to case series. Further study is warranted to establish tremor prevalence, and its significance to assessment and management.

Asunto(s)

RESUMEN

BACKGROUND: Over-the-counter medication overdose is a difficult diagnostic challenge for many physicians as common drug screening assays cannot detect these substances. We present a case of acute psychosis, serotonin syndrome, and anticholinergic overdose-like properties in the setting of Coricidin HBP Cough & Cold tablets, known by their street name Triple-C. This is the first case report we are aware of involving a patient presenting with these symptoms and requiring critical-care-level support. CASE PRESENTATION: A 31-year-old African American female with a past medical history of anxiety, childhood asthma, previous methamphetamine abuse, and coronavirus disease 2019 infection in August 2020 was brought to the emergency department by the local police department with altered mental status. Initial blood work, including extended drug screens, were unremarkable for a definitive diagnosis. This patient required critical-care-level support and high sedation because of her symptoms. Collateral history revealed the patient regularly consumed Triple-C daily for the 6 weeks prior to admission. A trial off sedation was attempted after 24 hours with no complications. The patient admitted to regular Triple-C consumption and auditory hallucinations since adolescence. She was discharged safely after 48 hours back into the community. She was lost to follow-up with psychiatry and internal medicine; however, she was evaluated in the emergency room 1 month later with a similar psychiatric presentation. CONCLUSION: Overdose of Triple-C should be kept in the differential diagnosis of patients presenting with a triad of psychosis, serotonin syndrome, and anticholinergic overdose, in the setting of unknown substance ingestion.

Asunto(s)

RESUMEN

Aflatoxin B1 is a carcinogenic mycotoxin that frequently contaminates crops worldwide. Current research indicates that the use of natural extracts to combat mycotoxin contamination may represent an eco-friendly, sustainable strategy to ensure food safety. Although Cannabis sativa L. has long been known for its psychoactive cannabinoids, it is also rich in many other bioactive molecules. This study examines extracts from various organs of Cannabis sativa L. to determine their ability to limit aflatoxin production and growth of Aspergillus flavus. The results indicate that flower extract is most effective for limiting the synthesis of aflatoxin B1, leading to an almost-complete inhibition of toxin production at a concentration of 0.225 mg dry matter per gram of culture medium. Since flower extract is rich in phenolic compounds, its total antioxidant ability and radical-scavenging capacity are determined. Compared with other anti-aflatoxigenic extracts, the anti-oxidative potential of Cannabis sativa L. flower extract appears moderate, suggesting that its anti-mycotoxin effect may be related to other bioactive compounds.

Asunto(s)

RESUMEN

Rationale Hypothermia forms a part of the diagnostic criteria for Systemic Inflammatory Response Syndrome (SIRS), National Early Warning Score (NEWS) and has repeatedly been shown to be associated with worse outcomes when compared to normothermic and hyperthermic patients with sepsis. We evaluate whether this is the case in COVID-19 patients. Objective To determine whether there is an association between hypothermia and worse prognosis in COVID-19 patients in the intensive care unit. Methods Retrospective study of a cohort of patients (n = 57) admitted to the intensive care unit of a community hospital with a positive test for COVID-19. Measurements Data relating to mortality, comorbidities and length of stay was recorded from electronic medical records for each patient. Hypothermia was defined as ≥2 recorded body temperatures of less than 96.5℉ (35.83℃) at the time of admission. Main results Of the 57 patients enrolled in the study, 21 developed hypothermia during their stay and 36 did not. Our results show that patients who have hypothermia at the time of admission spend a longer time intubated (p < 0.01) and go through longer ICU stays (p < 0.01). These patients are also 2.18 times more likely to suffer a fatal outcome compared to patients that did not develop hypothermia while in the intensive care unit (Chi-squared = 8.6209, p < 0.01, RR = 2.18). Conclusions Hypothermia in patients with severe COVID-19 at the time of admission to the ICU is associated with poorer outcomes for patients. This manifests as a longer period of intubation, longer ICU stay, and increased risk of mortality.

RESUMEN

BACKGROUND: Flexor hallucis longus tendon transfer (FHL) with a cortical button tension slide is an innovative addition that has not been measured against traditional methods. METHODS: 12 pairs (n=24) of fresh-frozen cadaveric tibia-to-toe samples were used and randomized to receive one of the operative FHL techniques. Specimens underwent bone density analysis. Biomechanical loading was applied between 20 and 60 N at 1 Hz for 100 cycles. Post-cyclic load to failure occurred at 1.25 mm/s. Cyclic displacement, structural stiffness, and ultimate load were derived from load-displacement curves. Student t tests evaluated significant effects between both FHL techniques. Linear regression analysis assessed interactions between bone density and strength of FHL technique. RESULTS: Average tendon diameter was 5.44±0.46 mm. Average bone density was 1.06±0.08 g/cm2. Addition of a cortical button to FHL transfer did not significantly affect cyclic displacement (0.78±0.52 mm vs 0.87±0.80 mm) or structural stiffness (162.11±43.34 N/mm vs 167.57±49.19 N/mm). Cortical button addition to FHL transfer resulted in significantly increased ultimate load (343.72±68.93 N) compared with interference screw alone (255.62±77.17 N) (P = .0002). Linear regression analyses did not reveal any significant interactions between bone density and FHL tendon transfer technique. CONCLUSION: Enhanced strength can be achieved with FHL tendon transfer to calcaneus using an interference screw and cortical button tension slide technique as compared to an interference screw alone. Cortical buttons in the setting of FHL tendon transfer to the calcaneus offers an additional level of support. CLINICAL RELEVANCE: Operative cases presenting with poor bone quality due to osteoporosis or osteopenia could benefit from cortical button fixation during FHL transfer. Clinical studies are needed to determine if the increased construct stability conferred from the additional use of a flip button results in fewer FHL transfer failures or better clinical outcomes. LEVEL OF EVIDENCE: Level V, Controlled Laboratory Study.

RESUMEN

PURPOSE: To evaluate the outcomes of proximal femoral derotation osteotomy (PFDO) on the hip and spine function of patients with abnormal femoral torsion. METHODS: This retrospective study included patients who underwent PFDO to treat increased or decreased femoral torsion between July 2014 and February 2019. The exclusion criteria were: previous fracture, fixation of slipped capital femoral epiphysis or osteotomy in the ipsilateral femur; PFDO associated to varus or valgus osteotomy; Tönnis grade 2 or 3 osteoarthritis; and PFDO performed to treat knee abnormalities. Hip function was assessed through the modified Harris Hip Score (mHHS). A subgroup of consecutive patients with low back pain before the PFDO and operated after 2017 had the spine function assessed through the Oswestry disability index (ODI). RESULTS: A total of 37 hips (34 patients) were studied: 15 hips with increased femoral torsion and 22 with decreased femoral torsion. Eight patients were male and 26 were female. The average age at PFDO was 33 years (range, 15-54 years). At a mean follow-up of 24 months (range, 12-65 months), the mean mHHS improved from 58.1 ± 14.3 before PFDO to 82 ± 15.6 at the most recent follow-up (P < .001). Improvement in the mHHS above the minimum clinically important difference (MCID) was observed in 33 hips (89%). In the subgroup of 14 consecutive patients with ODI available, the ODI improved from a mean of 45% ± 16% before the PFDO to 22% ± 17% at the most recent follow-up (P = .001). Nine (64.3%) of the 14 patients presented improvement in the ODI above the MCID. Revision procedure with a larger intramedullary nail was necessary in 2 hips to treat nonunion. CONCLUSION: Proximal femoral derotation osteotomy improves the hip and spine function in patients with increased or decreased femoral torsion and nonarthritic hips. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Asunto(s)

RESUMEN

BACKGROUND: Fracture site motion creates mechanical strains on the healing tissues which influences bone formation. Axial micro-motion maximizes dilatational strains, whereas shearing motions maximize deviatoric strains on the healing tissues. Dilatational strains optimize bone healing, deviatoric strains retard bone healing. Dynamization of external fixation using either an Ilizarov or Spatial Frame platform is used to increase loading on the limb which increases the mechanical stress and strain on the tissues to improve healing. The scientific literature does not address how dynamization of the spatial frame effects fracture site motion. The purpose of this study is to assess the effect of modified shoulder bolts incorporated into a spatial frame during dynamic loading. METHODS: Five identical two-ring spatial frame constructed were mounted on Sawbones tibias with an osteotomy performed distal to the tibial tubercle. Sinusoidal load was applied at a rate of 0.25 Hz. Axial force and displacement, in addition to motion of the proximal and distal tibia segments were recorded. Eight constructs were tested: 1) All struts of the Spatial Frame rigid, 2) Strut #1 loose, 3) Struts #1 and #3 loose, 4) Struts #1, #3 and #5 loose, 5) All struts loose, 6) All struts rigid with dynamization bolts on the proximal end, 7) All struts rigid with dynamization bolts on alternating sides, 8) Threaded rods between the rings with two millimeters of dynamization. RESULTS: No difference in vertical displacement was observed between the Ilizarov and all struts locked. No significant difference in shear values between all struts locked and modified shoulder bolt struts was observed. Increase in vertical movement with the modified shoulder bolts was an average of 1.83 mm. Significant shear forces at the fracture site were observed with unlocking single or multiple struts of the spatial frame. CONCLUSION: Modified shoulder bolts can be used for spatial frame dynamization without increasing shear motion.

Asunto(s)

RESUMEN

The treatment of hip and pelvic pain associated with abnormalities of the deep gluteal space has evolved and increasingly involves endoscopic techniques with a saline expansion medium. This investigation presents a surgical technique utilizing carbon dioxide as the insufflation medium for deep gluteal space endoscopy in 17 cadaveric hips. This technique was successful in 94% (16/17) of the hips, allowing for visualization of the sciatic nerve, posterior femoral cutaneous nerve, pudendal nerve, branch of the inferior gluteal artery crossing the sciatic nerve, piriformis muscle, hamstring tendon origin, and lesser trochanter. Our experience suggests that gas expansion presents several advantages over fluid expansion.

RESUMEN

BACKGROUND: The orientation of the acetabulum has a fundamental role in impingement and instability of the hip, and the spinopelvic parameters are thought to predict the sagittal orientation of the acetabulum (SOA). However, similar to the acetabular version (axial orientation) and inclination (coronal orientation), the cephalic or caudal orientation of the acetabulum in the sagittal plane, or SOA, may primarily be an intrinsic feature of the acetabulum itself. PURPOSE: To determine whether the spinopelvic parameters predict the sagittal orientation of the acetabulum in individuals without lumbar deformity. STUDY DESIGN: Cross-sectional study; Level of evidence, 4. METHODS: A retrospective analysis was performed in 89 patients (94 hips; 62 female, 27 male; mean ± SD age, 45.9 ± 15.4 years) without lumbosacral deformity who underwent magnetic resonance arthrogram (MRA) for assessment of hip pain. The SOA was determined in the sagittal cut MRA. A line was drawn at the distal limit of the anterior and posterior acetabular horns longitudinally to the transverse ligament, and the angle between this line and the axial plane represented the SOA. The sacral slope, pelvic incidence, and spinopelvic tilt were determined using a 3-dimensional cursor and the axial, sagittal, and coronal cuts. All MRA studies were performed with the patient in the supine position. RESULTS: The SOA had a mean ± SD cephalic orientation of 18° ± 6.6°. No significant correlation was observed between the SOA and the sacral slope (r = -0.03; P = .77). A weak correlation was observed between the SOA and the pelvic incidence (r = 0.22; P = .03) and between the SOA and the spinopelvic tilt (r = 0.41; P < .01). CONCLUSION: The SOA cannot be presumed based on the spinopelvic parameter. Similar to the well-known parameters to assess the axial and coronal orientation of the acetabulum, the assessment of the SOA demands acetabular-specific parameters. Additional studies are necessary to assess the SOA in asymptomatic hips, including disparities between genders. Clinically significant values for abnormal SOA of the acetabulum remain to be defined.

RESUMEN

ABSTRACT: The aim of the study was to determine the levels of aflatoxin B1 (AFB1) and ochratoxin A (OTA) in durum wheat samples collected over six periods of time from two official warehouses (A and B) in Lebanon. The concentrations of AFB1 in wheat samples taken from both warehouses ranged from 1.05 to 7.36 µg/kg. Results showed that 23.3 and 25.3% of samples taken from warehouse A and warehouse B, respectively, had AFB1 levels >2 µg/kg. For OTA, the contamination level of wheat samples taken from warehouse A and warehouse B was 52.0 and 44.6%, respectively, with concentrations ranging from 0.51 to 9.71 µg/kg. The percentage of samples with high detectable OTA levels (>3 µg/kg) was 28.6 and 25.3% for wheat samples taken from warehouse A and warehouse B, respectively. Thus, the consumption of wheat and derived products in Lebanon can be considered hazardous and may present a significant risk to the health of the Lebanese population regarding the overall daily exposure to these mycotoxins.

Asunto(s)