RESUMEN

A fundamental step in developing a protein drug is the selection of a stable storage formulation that ensures efficacy of the drug and inhibits physiochemical degradation or aggregation. Here, we designed and evaluated a general workflow for screening of protein formulations based on small-angle X-ray scattering (SAXS). Our SAXS pipeline combines automated sample handling, temperature control, and fast data analysis and provides protein particle interaction information. SAXS, together with different methods including turbidity analysis, dynamic light scattering (DLS), and SDS-PAGE measurements, were used to obtain different parameters to provide high throughput screenings. Using a set of model proteins and biopharmaceuticals, we show that SAXS is complementary to dynamic light scattering (DLS), which is widely used in biopharmaceutical research and industry. We found that, compared to DLS, SAXS can provide a more sensitive measure for protein particle interactions, such as protein aggregation and repulsion. Moreover, we show that SAXS is compatible with a broader range of buffers, excipients, and protein concentrations and that in situ SAXS provides a sensitive measure for long-term protein stability. This workflow can enable future high-throughput analysis of proteins and biopharmaceuticals and can be integrated with well-established complementary physicochemical analysis pipelines in (biopharmaceutical) research and industry.

RESUMEN

Microwave-assisted syntheses of colloidal nanocrystals (NCs), in particular CdSe quantum dots (QDs), have gained considerable attention due to unique opportunities provided by microwave dielectric heating. The extensive use of microwave heating and the frequently suggested specific microwave effects, however, pose questions about the role of the electromagnetic field in both the formation and quality of the produced QDs. In this work a one-pot protocol for the tunable synthesis of monodisperse colloidal CdSe NCs using microwave dielectric heating under carefully controlled conditions is introduced. CdSe QDs are fabricated using selenium dioxide as a selenium precursor, 1-octadecene as a solvent and reducing agent, cadmium alkyl carboxylates or alkyl phosphonates as cadmium sources, 1,2-hexadecanediol to stabilize the cadmium complex and oleic acid to stabilize the resulting CdSe QDs. Utilizing the possibilities of microwave heating technology in combination with accurate online temperature control the influence of different reaction parameters such as reaction temperature, ramp and hold times, and the timing and duration of oleic acid addition have been carefully investigated. Optimum results were obtained by performing the reaction at 240 °C applying a 5 min ramp time, 2 min hold time before oleic acid addition, 90 s for oleic acid addition, and a 5 min hold time after oleic acid addition (8.5 min overall holding at 240 °C). By using different cadmium complexes in the microwave protocol CdSe QDs with a narrow size distribution can be obtained in different sizes ranging from 0.5-4 nm by simply changing the cadmium source. The QDs were characterized by TEM, HRTEM, UV-Vis, and photoluminescence methods and the size distribution was monitored by SAXS. Control experiments involving conventional conductive heating under otherwise identical conditions ensuring the same heating and cooling profiles, stirring rates, and reactor geometries demonstrate that the electromagnetic field has no influence on the generated CdSe QDs. The resulting CdSe NCs prepared using either conductive or microwave dielectric heating exhibited the same primary crystallite size, shape, quantum yield and size distribution regardless of the heating mode.

RESUMEN

A new mechanism for mesostructure formation of ordered mesoporous carbons (OMCs) was investigated with in situ small-angle X-ray scattering (SAXS) measurements: thermally induced self-assembly. Unlike the well-established evaporation-induced self-assembly (EISA), the structure formation for organic-organic self-assembly of an oligomeric resol precursor and the block-copolymer templates Pluronic P123 and F127 does not occur during evaporation but only by following a thermopolymerization step at temperatures above 100 °C. The systems investigated here were cubic (Im3m), orthorhombic Fmmm) and 2D-hexagonal (plane group p6mm) mesoporous carbon phases in confined environments, as thin films and within the pores of anodic alumina membranes (AAMs), respectively. The thin films were prepared by spin-coating mixtures of the resol precursor and the surfactants in ethanol followed by thermopolymerization of the precursor oligomers. The carbon phases within the pores of AAMs were made by imbibition of the latter solutions followed by solvent evaporation and thermopolymerization within the solid template. This thermopolymerization step was investigated in detail with in situ grazing incidence small-angle X-ray scattering (GISAXS, for films) and in situ SAXS (for AAMs). It was found that the structural evolution strongly depends on the chosen temperature, which controls both the rate of the mesostructure formation and the spatial dimensions of the resulting mesophase. Therefore the process of structure formation differs significantly from the known EISA process and may rather be viewed as thermally induced self-assembly. The complete process of structure formation, template removal, and shrinkage during carbonization up to 1100 °C was monitored in this in situ SAXS study.

RESUMEN

Cubic and circular hexagonal mesoporous carbon phases in the confined environment of the pores of anodic alumina membranes (AAM) were obtained by organic-organic self-assembly of a preformed oligomeric resol precursor and the triblock copolymer templates Pluronic F127 or P123, respectively. Casting and solvent evaporation were followed by self-assembly and the formation of a condensed wall material by thermopolymerization of the precursor oligomers, thus resulting in mesostructured phenolic resin phases. Subsequent thermal decomposition of the surfactant and carbonization were achieved through thermal treatment at temperatures up to 1000 °C under an inert atmosphere. The resulting hierarchical mesoporous composite materials were characterized by small-angle X-ray scattering and nitrogen-sorption measurements. The structural features were directly imaged in TEM cross-sections of the composite membranes. For both structures, the AAM pores were completely filled and no shrinkage was observed due to strong adhesion of the carbon-wall material to the AAM pore walls. As a consequence, the pore size of the mesophase system stays almost constant even after thermal treatment at 1000 °C.

RESUMEN

The synthesis of nanoporous membranes based on different concepts and materials is a field of active research. This review focuses on the synthesis strategies, mesophase evolution mechanisms and potential applications of mesoporous materials confined within anodic alumina membranes (AAM). Following a rapid evolution of synthetic techniques, a significant number of different mesoporous materials (e.g., silica, titania, and carbon) with highly regular structures can now be prepared within these membranes. In recent years, efforts have also been made to understand the formation mechanisms of these hierarchical mesophases. The resulting organized nanoporous membranes open up a wide range of potential applications in fields such as templating oriented nanowires and controlled separation and release of molecules. For example, while various synthesis strategies can be used for the preparation of membrane-embedded nanowires, the latter can also be obtained as isolated objects after dissolution of the alumina host matrix. The review also discusses issues such as control of structural defects or integrity of interfaces that should be addressed in future research in order to fully exploit the potential of these hierarchical mesoporous channel structures.

Asunto(s)

RESUMEN

The synthesis of horizontal porous anodic alumina (PAA) structures with individually addressable channel systems is demonstrated. This was achieved by developing a multicontact design of aluminum finger structures (two to five contacts) on silicon wafers. These aluminum contacts were electrically isolated from each other, allowing the individual anodization of each contact at different conditions. This way it is possible to synthesize different pore diameters, pore densities, and channel lengths on a single chip. Scanning electron microscopy (SEM) characterization revealed that the neighboring contacts are not significantly altered during the anodization procedure. After successful barrier-layer thinning, the individual finger structures of each contact were filled by electrodeposition and thermal chemical vapor deposition. The resulting metal (Au, Cu, Ni, Co) and semiconductor (Te, Si) nanowires embedded within the porous anodic alumina mold were characterized by SEM and energy dispersive X-ray measurements. The multicontact fabrication results open a new route toward complex nanoelectronic and sensing applications.

Asunto(s)

RESUMEN

Periodic mesoporous organosilica (PMO) mesophases based on bis(triethoxysilyl)ethane (BTSE) were synthesized within the confined tubular environment of anodic alumina membrane (AAM) channels. The resulting mesophases were investigated by transmission small angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR), nitrogen sorption, and transmission electron microscopy (TEM). Two different surfactants--nonionic Brij 56 and ionic cetyltrimethylammonium bromide (CTAB)--were used in an acid-catalyzed evaporation-induced self-assembly (EISA) process. Brij 56 as the structure-directing agent (SDA) resulted in the formation of either the hexagonal circular or the cubic mesophase. While the hexagonal circular mesophase is common for such kinds of composites, the cubic mesophase has never been reported before. The template could be removed from the mesophases by template extraction and calcination after annealing the samples. When using CTAB as the SDA during EISA, the only mesophase observed was the hexagonal circular structure. This is in contrast to previous experiments and reports on pure silica mesophases, where the only mesophase formed with CTAB is hexagonal columnar.

Asunto(s)