RESUMEN
In the study, agricultural waste bagasse was used as a bio-based flame retardant for reducing the flammability of epoxy. Specifically, an interpenetrating network (IPN) was formed through a ring opening reaction between the hydroxyl functional group of bagasse and the epoxy group of triglycidyl isocyanurate (TGIC), forming Bagasse@TGIC. Next, 9, 10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO) was mixed with Bagasse@TGIC, inducing a reaction between the active hydrogen of DOPO and the epoxy group of TGIC, ultimately forming Bagasse@TGIC@DOPO with an IPN structure. Finally, the novel flame retardant was added to epoxy to create a composite. The integral procedural decomposition temperature (IPDT) of pure epoxy is 619 °C; after the introduction of the 30 wt% flame retardant, the IPDT of the resultant composite material increased to 799 °C, greatly increasing the thermal stability by 29%. After the addition of the Bagasse@TGIC@DOPO flame retardant, the limiting oxygen index increased from 21% for the pure epoxy to 29% for the composite, and the UL-94 rating improved from failing rating for the pure epoxy and V-0 rating for the composite. The Raman spectrum indicated that the addition of Bagasse@TGIC@DOPO IPN substantially increased the biochar yield during the burning process, increasing thermal stability. These results confirmed that the epoxy/Bagasse@TGIC@DOPO composite had substantial flame retarding effects.
RESUMEN
Polydimethylsiloxane with hydroxy groups was functionalized to form functionalized polydimethylsiloxane, which subsequently underwent an addition reaction with isophorone diisocyanate to form the prepolymer. Next, 3-aminopropyltriethoxysilane (APTS) reacted with 3-glycidoxypropyltrimethoxysilane (GPTS) to produce bridged polysilsesquioxanes, and sol-gel technology was employed to form hyperbranched polysiloxane nanoparticles with hydroxy groups, APTS-GPTS, which was used as the additive. The hyperbranched polysiloxane and the prepolymer containing NCO functional groups then underwent an addition reaction to produce the hybrid materials. Fourier-transform infrared spectroscopy and 29Si nuclear magnetic resonance were used to characterize the structure of the polyurethane hybrid. Regarding thermal stability, after the hyperbranched polysiloxane nanoparticles was introduced, the integral procedural decomposition temperature increased from 348 °C for polyurethane matrix to 859 °C for the hybrid material. The results reveal that the thermal stability of the hybrid material substantially increased by approximately 247%.