RESUMEN
Meckel's cartilage is a supporting tissue in the embryonic mandible that disappears during development; however, the precise mechanisms of this disappearance process are still undetermined. In this study, we observed morphological changes of Meckel's cartilage with development and analyzed the factors which might be related to this process. Meckel's cartilage of ICR strain mice from 14 to 19 days gestation (E14-19) were used in this study. Histological and immunohistochemical studies indicated the decrease in the amount of sulfated glycoconjugates and the localization of type I collagen in the Meckel's cartilage matrix during development. Chondrocytes also expressed high acid phosphatase activities at these stages. An organ culture study indicated that Meckel's cartilage at E17 disappeared during the cultivation period, while the cartilage at E14 did not disappear. Massive penetration of macrophages into the perichondrium was detected at E16. RT-PCR analysis of Meckel's cartilage indicated the expression of interleukin-1ß, type I collagen, MMP-9 at E17, but not at E14. MIP-1α, the candidate molecule for macrophage chemoattractant factor, was expressed at E14. These results indicated the dynamic matrix changes of Meckel's cartilage during development and suggested that the functional changes of chondrocytes in synthesis of type I collagen might be induced by interleukin-1ß secreted by the penetrating macrophages.
Asunto(s)
Cartílago/citología , Macrófagos/metabolismo , Animales , Cartílago/metabolismo , Femenino , Inmunohistoquímica , Macrófagos/citología , Ratones , Ratones Endogámicos ICR , Técnicas de Cultivo de Órganos , Reacción en Cadena de la Polimerasa de Transcriptasa InversaRESUMEN
PURPOSE: Clinical findings were compared with glucose, protein, albumin, bilirubin, creatinine, pH, occult blood, ketone body, nitrite, and white blood cells contained in whole saliva to investigate the components that most markedly reflect the periodontal condition. MATERIAL AND METHOD: The subjects were staff of the Prosthodontics Department, Showa University, and patients who visited for dental treatments (57 subjects in total). At the first time, saliva samples were gargled with 1.5 ml of distilled water for 15 seconds and collected by spitting out into a paper cup. At the second time, saliva samples were collected by the same method. At the third time, saliva samples after chewing paraffin gum for 60 seconds were collected by spitting out into a paper cup. Thus whole saliva collecting that was divided on three times. After sampling, 8 mul of the saliva sample was dripped in reagent sticks for the 10 items of urinary test paper and the reflectance was measured using a specific reflectometer. In the periodontal tissue evaluation, the degree of alveolar bone resorption, probing value, and tooth mobility and the presence or absence of lesions in the root furcation were examined and classified into 4 ranks. The mean values in each periodontal disease rank and correlation between the periodontal disease ranks and the components were statistically analyzed. RESULTS: Bilirubin and ketone body were not measurable. The components density of the 8 items was increased as the periodontal disease rank increased. Regarding the correlation between the periodontal disease ranks and the components, high correlations were noted for protein, albumin, creatinine, pH, and white blood cells. CONCLUSION: The simultaneous measurement method of 8 salivary components using test paper may be very useful for the diagnosis of periodontal disease of abutment teeth.
Asunto(s)
Enfermedades Periodontales/diagnóstico , Proteínas/análisis , Saliva/química , Urinálisis/métodos , Adulto , Anciano , Albúminas/análisis , Biomarcadores/análisis , Creatinina/análisis , Femenino , Humanos , Concentración de Iones de Hidrógeno , Recuento de Leucocitos , Masculino , Persona de Mediana Edad , Saliva/citologíaRESUMEN
Laboratory-designed biocomposites structured by organic matrices impregnated with oriented biominerals have been significantly progressed by mimicking biological processes, although several problems associated with their formulation or antigenicity remain to be solved. Here, we describe a new strategy for the formulation of bioinspired nanostructures that involves spontaneous mediation by cooperative interactions between inorganic nanocrystals and host cells without the complex procedures required for laboratory-designed biocomposites. In the present study, osteoblastic cells were cultured on hydroxyapatite and beta-tricalcium phosphate nanocrystals prepared by discharging in electrolytes. Specifically, a high level of assembly of collagenous proteins associated with cell proliferation was achieved on nanoscale beta-tricalcium phosphate crystals by catalysis of polyphosphate chains produced during cell culture. Furthermore, a spatial structure that was practically composed of natural biocomposites found in bone and teeth was obtained on the nanocrystals due to increased cross-linking between inorganic molecules and biomolecules. Suggestions for the spontaneous formulation of bioinspired nanostructures in a living body mediated by inorganic biomaterials are also discussed.
Asunto(s)
Materiales Biocompatibles/química , Nanopartículas/química , Nanoestructuras/química , Ingeniería de Tejidos/métodos , Células 3T3 , Animales , Sustitutos de Huesos/química , Fosfatos de Calcio/química , Proliferación Celular , Colágeno/química , Cristalización , Matriz Extracelular/metabolismo , Ratones , Osteoblastos/metabolismo , Titanio/químicaRESUMEN
Interleukin (IL)-4 and IL-13 are closely related cytokines known to inhibit osteoclast formation by targeting osteoblasts to produce an inhibitor, osteoprotegerin (OPG), as well as by directly targeting osteoclast precursors. However, whether their inhibitory actions are the same remains unclear. The inhibitory effect of IL-4 was stronger than that of IL-13 in an osteoclast-differentiation culture system containing mouse osteoblasts and osteoclast precursors. Both cytokines induced OPG production by osteoblasts in similar time- and dose-dependent manners. However, IL-4 was stronger in direct inhibition that targeted osteoclast precursors. Furthermore, IL-4 induced phosphorylation of signal transducer and activator of transcription-6 (STAT6) at lower concentrations than those of IL-13 in osteoclast precursors. IL-4 but not IL-13 strongly inhibited the expression of nuclear factor of activated T-cells, cytoplasmic 1 (nuclear factor-ATc1), a key factor of osteoclast differentiation, by those precursors. Thus, the activities of IL-4 and IL-13 toward osteoclast precursors were shown to be different in regards to inhibition of osteoclast differentiation, whereas those toward osteoblasts for inducing OPG expression were equivalent.
Asunto(s)
Interleucina-13/farmacología , Interleucina-4/farmacología , Osteoblastos/efectos de los fármacos , Osteoclastos/efectos de los fármacos , Osteoprotegerina/biosíntesis , Animales , Células de la Médula Ósea/citología , Diferenciación Celular/efectos de los fármacos , Diferenciación Celular/fisiología , Técnicas de Cocultivo , Relación Dosis-Respuesta a Droga , Regulación de la Expresión Génica/efectos de los fármacos , Macrófagos/citología , Masculino , Ratones , Factores de Transcripción NFATC/biosíntesis , Factores de Transcripción NFATC/genética , Osteoblastos/citología , Osteoblastos/metabolismo , Osteoclastos/citología , Osteoprotegerina/genética , Ligando RANK/biosíntesis , Ligando RANK/genética , ARN Mensajero/genética , Proteínas Recombinantes/farmacología , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa/métodos , Factor de Transcripción STAT6/metabolismoRESUMEN
To increase the bond strength of CAD/CAM-fabricated, leucite-reinforced glass ceramics with a resin cement, the effects of the following were investigated: surface modification by tribochemical (TBC) treatment, followed by combined application of a silane coupling agent and a functional monomer as a primer. Bond strength was evaluated by a shear bond test. It was found that a silane coupling agent was useful for all the surfaces, particularly for the TBC-treated surface. This was because of the presence of a silica layer on the modified surface. The combination of a silane coupling agent and a functional monomer on the TBC surface allowed marked improvement in bonding, whereby the bonding endured 20,000 cycles of thermal cycling. Therefore, TBC treatment in combination with a silane coupling agent and a functional monomer as a primer substantially increased the bond strength of CAD/CAM-fabricated glass ceramics with resin cement, if the treatment conditions were appropriate.
Asunto(s)
Recubrimiento Dental Adhesivo , Porcelana Dental , Cementos de Resina , Silicatos de Aluminio , Análisis de Varianza , Cerámica , Diseño Asistido por Computadora , Diseño de Prótesis Dental , Análisis del Estrés Dental , Fricción , Metacrilatos , Microscopía Electrónica de Rastreo , Resistencia al Corte , Silanos , Propiedades de SuperficieRESUMEN
Osteoclasts are terminally differentiated from cells of monocyte/macrophage lineage by stimulation with TNF-related activation-induced cytokine (TRANCE) (receptor activator of NF-kappaB ligand/osteoprotegerin ligand/osteoclast differentiation factor/TNFSF11/CD254). In the present study, we attempted to determine when and how the cell fate of precursors becomes committed to osteoclasts following TRANCE stimulation. Although mouse bone marrow-derived macrophages (BMMs) were able to differentiate into either osteoclasts or dendritic cells, the cells no longer differentiated into dendritic cells after treatment with TRANCE for 24 h, indicating that their cell fate was committed to osteoclasts. Committed cells as well as BMMs were still quite weak in tartrate-resistant acid phosphatase activity, an osteoclast marker, and incorporated zymosan particles by phagocytosis. Interestingly, committed cells, but not BMMs, could still differentiate into osteoclasts even after incorporation of the zymosan particles. Furthermore, IL-4 and IFN-gamma, potent inhibitors of osteoclast differentiation, failed to inhibit osteoclast differentiation from committed cells, and blocking of TRANCE stimulation by osteoprotegerin resulted in cell death. Adhesion to culture plates was believed to be essential for osteoclast differentiation; however, committed cells, but not BMMs, differentiated into multinucleated osteoclasts without adhesion to culture plates. Although LPS activated the NF-kappaB-mediated pathway in BMMs as well as in committed cells, the mRNA expression level of TNF-alpha in the committed cells was significantly lower than that in BMMs. These results suggest that characteristics of the committed cells induced by TRANCE are distinctively different from that of BMMs and osteoclasts.
Asunto(s)
Proteínas Portadoras/metabolismo , Diferenciación Celular/inmunología , Glicoproteínas de Membrana/metabolismo , Osteoclastos/ultraestructura , Células Madre/ultraestructura , Animales , Northern Blotting , Células de la Médula Ósea/inmunología , Adhesión Celular , Células Dendríticas/citología , Citometría de Flujo , Expresión Génica , Humanos , Immunoblotting , Macrófagos/citología , Ratones , Microscopía Electrónica de Transmisión , Fagocitosis/inmunología , Ligando RANK , ARN Mensajero/análisis , Receptor Activador del Factor Nuclear kappa-B , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Zimosan/metabolismoRESUMEN
OBJECTIVE: To investigate the resistance to cyclic fatigue of maxillary incisors with flared canals restored with different post-and-core materials. METHODS: Thirty human maxillary central incisors were assigned randomly to two main groups (non-ferrule and 1-mm ferrule) of 15. Each main group was then divided into 3 groups of 5 specimens and restored with custom cast post-and-core (MPC), resin composite post-and-core (RCP), and resin composite core combined with prefabricated carbon fiber post (FRC), respectively. Every group was subjected to a cyclic fatigue test, and recorded the numbers of load cycles that occurred tooth fracture. All data were analyzed with two-way ANOVA and the Tukey HSD test at alpha = 0.05. RESULTS: FRC revealed significantly higher fatigue strength than the other groups (P < 0.05). Preparing a dentin ferrule increased significantly fatigue resistance (P < 0.05). The favorable (retrieval) fracture pattern of the tested specimens was discovered only in RCP. CONCLUSIONS: Using FRC may get a long fatigue life in restoring pulpless teeth with flared canals. Dentin ferrule preparation is necessary to enhance resistance of the restorations to cyclic fatigue.
Asunto(s)
Carbono , Resinas Compuestas , Cavidad Pulpar/patología , Técnica de Perno Muñón , Diente no Vital/terapia , Fibra de Carbono , Aleaciones de Cromo , Materiales Dentales , Humanos , Ensayo de MaterialesRESUMEN
The location of excitatory premotor neurons for jaw-closing motoneurons was examined by the use of electrical and chemical stimulation and extracellular single-unit recording techniques in the anesthetized rat. Single-pulse electrical stimulation of the supratrigeminal region (SupV) and the reticular formation dorsal to the facial nucleus (RdVII) elicited masseter EMG response at mean (+/-SD) latencies of 2.22 +/- 0.59 ms and 3.10 +/- 1.14 ms, respectively. Microinjection (0.1-0.3 microl) of glutamate (50 mM) or kainate (0.5-100 microM) into RdVII increased masseter nerve activity in artificially ventilated and immobilized rats by 30.2 +/- 40.5% and 50.7 +/- 46.8% compared to baseline values, respectively. Forty reticular neurons were antidromically activated by stimulation of the ipsilateral trigeminal motor nucleus (MoV). Twenty neurons were found in RdVII, and the remaining 20 neurons were located in SupV, or areas adjacent to SupV or RdVII. Eleven neurons in RdVII responded to at least either passive jaw opening or light pressure applied to the teeth or tongue. Nine neurons responded to passive jaw opening. Five of the nine neurons responded to multiple stimulus categories. A monosynaptic excitatory projection from one neuron in RdVII was detected by spike-triggered averaging of the rectified masseter nerve activity. We suggest that reticular neurons in RdVII are involved in increasing masseter muscle activity and that excitatory premotor neurons for masseter motoneurons are likely located in this area. RdVII could be an important candidate for controlling activity of jaw-closing muscles via peripheral inputs.
Asunto(s)
Maxilares/fisiología , Músculos Masticadores/fisiología , Neuronas/fisiología , Formación Reticular/citología , Núcleos del Trigémino/citología , Potenciales de Acción/fisiología , Animales , Mapeo Encefálico , Estimulación Eléctrica/métodos , Electromiografía/métodos , Agonistas de Aminoácidos Excitadores/farmacología , Ácido Glutámico/farmacología , Ácido Kaínico/farmacología , Masculino , Músculos Masticadores/efectos de los fármacos , Músculos Masticadores/efectos de la radiación , Neuronas/efectos de los fármacos , Neuronas/efectos de la radiación , Ratas , Ratas Wistar , Tiempo de Reacción/efectos de los fármacos , Estimulación QuímicaRESUMEN
The aim of this study was to evaluate the resistance to fracture of endodontically treated teeth with flared canals restored with different post and core restorations under static and cyclic fatigue loadings. Sixty human maxillary central incisors were used. Two main groups (non-ferrule and 1-mm ferrule) were divided into three types of restoration: custom cast post-and-core (MPC), resin composite post-and-core (RCP), and resin composite core in combination with prefabricated carbon fiber post (FRC). Half of each group was subjected to a static loading test, and the other to a cyclic fatigue test. FRC exhibited a significantly higher number of load cycles than the other groups, and MPC showed the highest failure load among the tested groups. However, all FRC and MPC specimens demonstrated unfavorable root fractures. The results of this study suggested that RCP prepared with 1-mm ferrule was the most desirable restoration for structurally compromised roots, as relatively strong resistance to cyclic fatigue and fracture was revealed--given that all RCP specimens demonstrated favorable root fracture.
Asunto(s)
Fracaso de la Restauración Dental , Técnica de Perno Muñón , Fracturas de los Dientes/prevención & control , Diente no Vital , Análisis de Varianza , Carbono , Fibra de Carbono , Resinas Compuestas , Fuerza Compresiva , Diseño de Prótesis Dental , Análisis del Estrés Dental , Aleaciones de Oro , Humanos , Incisivo , Preparación del Conducto Radicular/métodos , Fracturas de los Dientes/etiología , Diente no Vital/complicacionesRESUMEN
PURPOSE: This study investigated the color stability of composite resins for a facing crown cured with a high output photo-curing unit (Hyper LII, YAMAHACHI DENTAL MFG., CO.). METHODS: Four brands of composite resins for a facing crown after polymerization with Hyper LII were immersed in coffee. Color measurement was carried out before and 1, 2, and 4 weeks after immersion, and the results were compared. RESULTS: 1. After immersion in coffee, the L* values decreased gradually, the a* values showed little change, and the b* values increased gradually in all resins. 2. The difference in the color difference values (deltaE*ab) between each material became greater with time; the deltaE*ab after 4 weeks immersion were from 3.0 [Dentacolor (DEC), dentin specimen] to 6.3 [Solidex (SOL), enamel specimen] on polished surfaces, and from 0.9 [Gradia (GRA), dentin specimen] to 5.2 (SOL, enamel specimen) on non-polished surfaces. However, the deltaE*ab were 1/3 to 1/5 better than those of our previous studies. 3. The enamel specimens showed larger color differences than the dentin specimens. 4. When polished surfaces were compared with non-polished surfaces, Cesead II (CEII), DEC and SOL showed almost equal color differences while GRA showed larger color differences. CONCLUSIONS: This study suggests that composite resins for a facing crown cured with a high output photo-curing unit result in a decrease of color changes with time and an improvement of color stability.
Asunto(s)
Resinas Acrílicas , Resinas Compuestas , Coronas , Poliuretanos , Color , PolímerosRESUMEN
PURPOSE: The purposes of this study were to evaluate the shear bond strength of luting glass-ionomer cement to a dentin surface treated by pulsed Nd:YAG laser irradiation, and to prove the hypothesis that the bond strength of glass-ionomer luting cement to dentin is favorably altered after Nd:YAG laser irradiation. MATERIALS AND METHODS: Sixty-four extracted human molars with an exposed flat dentin surface were divided into four groups (n = 16). After painting black ink on their surfaces, the teeth of groups 1, 2, and 3 were irradiated by an Nd:YAG laser at 1.064-microm wavelength at 1, 2, and 3 W, respectively; group 4 was untreated and served as a control. Some specimens of each group were used for morphologic and atomic analytic study, and the others were used for shear bond testing. The shear bond test was performed after cylindric titanium specimens were cemented with glass-ionomer cement on a circular dentin area and specimens were immersed in distilled water. The tested specimens were also morphologically investigated. RESULTS: Shear bond strength of group 3 was significantly higher than that of the control group. Morphologic observation of the cement-dentin interface showed good adaptation of the luting cement to laser-treated dentin. Analysis of atomic contents on the dentin surface showed a significant increase of calcium:phosphorus ratio after laser irradiation. CONCLUSION: The dentin surface was modified morphologically and chemically, and the shear bond strength of glass-ionomer luting cement to dentin was increased by Nd:YAG laser irradiation at 3 W.
Asunto(s)
Recubrimiento Dental Adhesivo , Dentina/efectos de la radiación , Cementos de Ionómero Vítreo/química , Rayos Láser , Silicatos de Aluminio , Calcio/análisis , Dentina/química , Dentina/ultraestructura , Microanálisis por Sonda Electrónica , Humanos , Microscopía Electrónica de Rastreo , Neodimio , Fósforo/análisis , Resistencia al Corte , Espectrofotometría Atómica , Estrés Mecánico , Titanio/química , Agua/química , ItrioRESUMEN
Descending action from the locus coeruleus (LC) on the trigeminal sensorimotor function was evaluated in a rat model of oral-facial inflammation. For the induction of oral-facial inflammation, mustard oil (20% solution in 20microl mineral oil) was injected into the region of the temporomandibular joint (TMJ). One week before testing, rats received bilateral lesions of the LC using a cathodal current. The electromyogram (EMG) threshold, which is the threshold intensity for the onset of EMG activity of the masseter muscle evoked by pressure on the TMJ region, was used in the present study as an indicator of the trigeminal sensorimotor function. Following mustard oil injection, in the LC-lesioned rats, EMG thresholds significantly decreased at 30min, which lasted up to 240min. In contrast, EMG thresholds in the LC-intact rats returned to the level before injection after 180min. Systemic naloxone (1.3mg/kg, i.v.) produced a further decrease of EMG thresholds in both the LC-intact and LC-lesioned rats. Under the existence of naloxone, EMG thresholds in the LC-lesioned rats were significantly lower than those of the LC-intact rats. These results suggest that oral-facial inflammation activates the coeruleotrigeminal modulating system and that an action of this system is independent of the opioid depressive mechanism.