RESUMEN

Background: Evidence on whether long-term exposure to air pollution increases the mortality risk in patients with chronic obstructive pulmonary disease (COPD) is limited. Objectives: We aimed to investigate the associations of long-term exposure to particulate matter with diameter <10 µm (PM10) and nitrogen dioxide (NO2) with overall and disease-specific mortality in COPD patients. Design: We conducted a nationwide retrospective cohort study of 121,423 adults ⩾40 years diagnosed with COPD during 1 January to 31 December 2009. Methods: Exposure to PM10 and NO2 was estimated for residential location using the ordinary kriging method. We estimated the risk of overall mortality associated with 1-, 3-, and 5-years average concentrations of PM10 and NO2 using Cox proportional hazards models and disease-specific mortality using the Fine and Gray method adjusted for age, sex, income, body mass index, smoking, comorbidities, and exacerbation history. Results: The adjusted hazard ratios (HRs) for overall mortality associated with a 10 µg/m3 increase in 1-year PM10 and NO2 exposures were 1.004 [95% confidence interval (CI) = 0.985, 1.023] and 0.993 (95% CI = 0.984, 1.002), respectively. The results were similar for 3- and 5-year exposures. For a 10-µg/m3 increase in 1-year PM10 and NO2 exposures, the adjusted HRs for chronic lower airway disease mortality were 1.068 (95% CI = 1.024, 1.113) and 1.029 (95% CI = 1.009, 1.050), respectively. In stratified analyses, exposures to PM10 and NO2 were associated with overall mortality in patients who were underweight and had a history of severe exacerbation. Conclusion: In this large population-based study of patients with COPD, long-term PM10 and NO2 exposures were not associated with overall mortality but were associated with chronic lower airway disease mortality. PM10 and NO2 exposures were both associated with an increased risk of overall mortality, and with overall mortality in underweight individuals and those with a history of severe exacerbation.

RESUMEN

Herein, we report the effect of using nanoparticles of LiFePO4 on the electrochemical properties of all-solid-state batteries (ASSBs) with a solid electrolyte. LiFePO4 (LFP) cathode materials are promising cathode materials in polymer-based composite solid electrolytes because of their limited electrochemical window range. However, LFP cathodes exhibit poor electric conductivity and sluggish lithium ion diffusion. In addition, there is a disadvantage in that the interfacial resistance increases due to poor contact between the LFP cathode material and the solid electrolyte when composing the composite cathode. The nano-sized LFP cathode material increases the contact area between solid electrolyte in the positive electrode and enhances lithium ion diffusion. Therefore, the structural differences and electrochemical performance of these nanoscale LFP cathode materials in the ASSB were studied by X-ray diffraction, scanning electron microscopy, and electrochemical analysis.

RESUMEN

The consumer demands for low fat foods are increasing to reduce obesity and chronic diseases. Low-fat tofu (LFT) was prepared using soy flours treated with supercritical CO2 (SC-CO2) at pressures of 10, 20, and 30 MPa. After SC-CO2 treatment, the residual oil contents of the soy flours were 12.07, 8.12, and 1.64%, respectively, whereas that of the control soy flour was 18.20%. The objective of this study was to investigate the yield and quality characteristics of LFTs, compared to the control tofu. All SC-CO2-treated LFTs had significantly higher protein and moisture contents than the control tofu. The yields (g/100 g soy flour) of SC-CO2-treated tofu were 442.69, 507.44, and 535.47 g, respectively, at three fat levels, whereas the yield was 385.23 g in case of the control tofu. The SC-CO2-treated LFTs had softer textural attributes due to increasing moisture contents. In addition, the LFTs obtained higher sensory scores owing to softer texture and lower beany flavor than control sample. SC-CO2-treated soy flours showed higher solubility in soy milk, leading to higher yield, produced softer texture of tofu, and increased nutritional value with low fat and high protein content.

RESUMEN

Spinal disease is a common yet important condition that occurs because of inappropriate posture. Prevention could be achieved by continuous posture monitoring, but most measurement systems cannot be used in daily life due to factors such as burdensome wires and large sensing modules. To improve upon these weaknesses, we developed comfortable "smart wear" for posture measurement using conductive yarn for circuit patterning and a flexible printed circuit board (FPCB) for interconnections. The conductive yarn was made by twisting polyester yarn and metal filaments, and the resistance per unit length was about 0.05 Ω/cm. An embroidered circuit was made using the conductive yarn, which showed increased yield strength and uniform electrical resistance per unit length. Circuit networks of sensors and FPCBs for interconnection were integrated into clothes using a computer numerical control (CNC) embroidery process. The system was calibrated and verified by comparing the values measured by the smart wear with those measured by a motion capture camera system. Six subjects performed fixed movements and free computer work, and, with this system, we were able to measure the anterior/posterior direction tilt angle with an error of less than 4°. The smart wear does not have excessive wires, and its structure will be optimized for better posture estimation in a later study.

RESUMEN

Defatted soy flour is a potential source of food protein, amino acids, ash and isoflavones. The supercritical carbon dioxide (SC-CO2) and a traditional organic solvent extraction methods were used to remove fat from soy flour, and the quality characteristics of a control soy flour (CSF), defatted soy flour by SC-CO2 (DSFSC-CO2) and defatted soy flour by an organic solvent (DSF-OS) were compared. The SC-CO2 process was carried out at a constant temperature of 45 °C, and a pressure of 40 MPa for 3 h with a CO2 flow rate of 30 g/min. The DSFSC-CO2 had significantly higher protein, ash, and amino acids content than CSF and DSF-OS. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis demonstrated that CSF and DSFSC-CO2 had protein bands of similar intensity and area that indicated no denaturation of protein, whereas DSF-OS showed diffuse bands or no bands due to protein denaturation. In addition to higher nutritional value and protein contents, DSFSC-CO2 showed superior functional properties in terms of total soluble solids content, water and oil absorption, emulsifying and foaming capacity. The SC-CO2 method offers a nutritionally and environmentally friendly alternative extraction processing approach for the removal of oil from high-protein food sources. It has a great potential for producing high-protein fat-free, and low-calorie content diet than the traditional organic solvent extraction method.

RESUMEN

We describe an attempt at the development of an in situ detector for beta ray measurements in underwater environment. The prototype of the in situ detector is based on a CaF2: Eu scintillator using crystal light guide and Si photomultiplier. Tests were conducted using various reference sources for evaluating the linearity and stability of the detector in underwater environment. The system is simple and stable for long-term monitoring, and consumes low power. We show here an effective detection distance of 7 mm and a 2.273 MeV end-point energy spectrum of 90Sr/90Y when using the system underwater. The results demonstrate the feasibility of in situ beta ray measurements in underwater environment and can be applied for designing an in situ detector for radioactivity measurement in underwater environment. The in situ detector can also have other applications such as installation on the marine monitoring platform and quantitative analysis of radionuclides.

Asunto(s)

RESUMEN

Defatted bovine liver (DBL) is a potential source of protein and minerals. Supercritical carbon dioxide (SC-CO2) and a traditional organic solvent method were used to remove lipid from bovine liver, and the quality characteristics of a control bovine liver (CBL), bovine liver defatted by SC-CO2 (DBLSC-CO2) at different pressures, and bovine liver defatted by organic solvent (DBL-OS) were compared. The DBLSC-CO2 samples had significantly higher (p<0.05) protein, amino acid, carbohydrate, and fiber contents than CBL and DBL-OS. There was a higher yield of lipid from CBL when using SC-CO2 than the organic solvent method. SDS-PAGE analysis demonstrated that the CBL and DBLSC-CO2 had protein bands of a similar intensity and area, whereas DBL-OS appeared extremely poor bands or no bands due to the degradation of proteins, particularly in the 50 to 75 kDa and 20 to 25 kDa molecular weight ranges. In addition, DBLSC-CO2 was shown to have superior functional properties in terms of total soluble content, water and oil absorption, and foaming and emulsification properties. Therefore, SC-CO2 treatment offers a nutritionally and environmentally friendly approach for the removal of lipid from high protein food sources. In addition, SC-CO2 may be a better substitute of traditional organic solvent extraction for producing more stable and high quality foods with high-protein, fat-free, and low calorie contents.

RESUMEN

PURPOSE: We have developed a new method of segmenting the areas of absorbable implants and bone using region-based segmentation of micro-computed tomography (micro-CT) images, which allowed us to quantify volumetric bone-implant contact (VBIC) and volumetric absorption (VA). MATERIALS AND METHODS: The simple threshold technique generally used in micro-CT analysis cannot be used to segment the areas of absorbable implants and bone. Instead, a region-based segmentation method, a region-labeling method, and subsequent morphological operations were successively applied to micro-CT images. The three-dimensional VBIC and VA of the absorbable implant were then calculated over the entire volume of the implant. Two-dimensional (2D) bone-implant contact (BIC) and bone area (BA) were also measured based on the conventional histomorphometric method. RESULTS: VA and VBIC increased significantly with as the healing period increased (p<0.05). VBIC values were significantly correlated with VA values (p<0.05) and with 2D BIC values (p<0.05). CONCLUSION: It is possible to quantify VBIC and VA for absorbable implants using micro-CT analysis using a region-based segmentation method.

RESUMEN

STUDY OBJECTIVE: To compare surgical outcomes and overall costs of less invasive methods of hysterectomy to treat benign disease including total vaginal hysterectomy (TVH) and total laparoscopic hysterectomy (TLH) in women with a uterus weighing >500 g. DESIGN: Retrospective review of medical records (Canadian Task Force classification III). SETTING: University-associated hospital. PATIENTS: One hundred three women with a uterus weighing >500 g who had undergone either total vaginal hysterectomy (TVH) (n = 52) or total laparoscopic hysterectomy (TLH) (n = 51). MEASUREMENTS AND MAIN RESULTS: Cost data were extracted from the hospital billing system. Patient characteristics, surgical outcomes, and hospital costs were compared between the 2 groups. Patient characteristics were similar in both groups except for a history of surgery (TVH 11.5%, and TLH 37.3%; p = .01). Insofar as surgical outcomes, mean (SD) operative time was shorter in the TVH group compared with the TLH group (110.00 [28.68] minutes vs 180.47 [51.32] minutes; p < .001), and hospital stay was longer (8.08 [0.68] days vs 7.45 [1.03] days; p < .001). Other surgical outcomes including estimated blood loss (p = .20) and decrease in hemoglobin (p = .12) did not differ between the 2 groups. Total hospital costs (converted from Korean won to US dollars) were significantly lower in the TVH group than in the TLH group ($2076.59 [$666.58] vs $2744.03 [$715.76]; p < .001). CONCLUSION: Our data suggest that TVH is a safe and economic procedure even in women with a uterus weighing >500 g. Skilled surgeons should preferentially consider TVH for treatment of benign uterine disease, regardless of uterine size.

Asunto(s)

RESUMEN

We evaluated the settling ability and dewaterability of granulated methane-oxidizing bacteria (GMOB) after granulation using a continuous-flow reactor. A comparative analysis on settling and dewatering characteristics due to changes in sludge retention time (SRT, 10, 15 and 20 days) during cultivation of GMOB was conducted. In assessing dewaterability, the specific resistance to filtration (SRF) of activated sludge and GMOB was found to be 8.21 x 10(13)-2.38 x 10(14) and 4.88 x 10(12) - 1.98 x 10(13) m/kg, respectively. It was confirmed that as SRT decreased, SRF of GMOB increased. In the case of bound extracellular polymeric substance (EPS), activated sludge registered 147.5 mg/g-VSS while GMOB exhibited 171-177.2 mg/g-VSS. In the case of extracellular polymeric substance soluble EPS in effluent, activated sludge measured 62 mg/L and GMOB had 17.4-21.4 mg/L. The particle size analysis showed that mean particle diameters of GMOB were 402, 369, and 350 microm, respectively, at SRTs of 20, 15 and 10 days. In addition, it was found that GMOB had a larger mean particle diameter and exhibited much better settleability and dewaterability than activated sludge did.

Asunto(s)

RESUMEN

OBJECTIVE: This study was designed to evaluate the safety and feasibility of prophylactic adnexectomy during vaginal hysterectomy for benign pathology. METHODS: We retrospectively reviewed medical records of all patients who underwent vaginal hysterectomy (VH) between 2008 and 2010. Clinical comparison of patients who underwent VH with adnexectomy (n = 92) and VH only (n = 686) was performed. Clinical characteristics (age, parity, body mass index, and previous pelvic surgery), surgical outcomes (uterine weight, operative time, estimated blood loss, pelvic adhesion, hemoglobin change and hospital stay) and intra- and postoperative complications (transfusion, bladder injury and fever) were evaluated. RESULTS: Clinical characteristics except for age (45.44 years for VH only vs. 47.15 years for VH with adnexectomy, P = 0.007) were not different between the two groups. Similarly, surgical outcomes and complication rates were not different between the two groups. CONCLUSION: Prophylactic bilateral adnexectomy can be performed safely during VH.

Asunto(s)

RESUMEN

LiFePO4 nanocrystals were synthesized at a very low temperature of 170°C using carbon nanoparticles by a solvothermal process in a polyol medium, namely diethylene glycol without any heat treatment as a post procedure. The powder X-ray diffraction pattern of the LiFePO4 was indexed well to a pure orthorhombic system of olivine structure (space group: Pnma) with no undesirable impurities. The LiFePO4 nanocrystals synthesized at low temperature exhibited mono-dispersed and carbon-mixed plate-type LiFePO4 nanoparticles with average length, width, and thickness of approximately 100 to 300 nm, 100 to 200 nm, and 50 nm, respectively. It also appeared to reveal considerably enhanced electrochemical properties when compared to those of pristine LiFePO4. These observed results clearly indicate the effect of carbon in improving the reactivity and synthesis of LiFePO4 nanoparticles at a significantly lower temperature.

RESUMEN

AIM: To identify the preoperative risk factors affecting the conversion to laparotomy during vaginal hysterectomy (VH) for benign uterine conditions. MATERIAL AND METHODS: The charts were reviewed for all patients who underwent VH between 1 January 2003 and 31 December 2008 at Hallym University Hospital, Seoul. RESULTS: The rate of conversion to laparotomy was 3.7% (32 cases). Factors that were independently associated with the risk of conversion to laparotomy were found to be low parity (conversion 1.43 vs VH 1.92, P=0.021), previous abdominal surgery (conversion 0.71 vs, VH 0.26, P=0.012), pelvic adhesion (conversion 1.25 vs VH 0.04, P=0.000), and large uterine weight (conversion 345.15g vs VH 222.38g, P=0.005). In the conversion group, the operative time was longer (conversion 144.84min vs VH 77.67min, P=0.000), and estimated blood loss was also greater (conversion 656.25mL vs VH 358.47mL, P=0.00). Postoperative hemoglobin change (conversion 1.65g/dL vs VH 1.23g/dL, P=0.046) and transfusion rate were also greater in the conversion group (conversion 0.75 vs VH 0.01, P=0.001). CONCLUSION: VH is the main procedure for benign uterine disease and is successfully performed in most cases. But several factors, including low parity, previous abdominal surgery, pelvic adhesion and large uterine weight can affect the risk of conversion to laparotomy.

Asunto(s)

RESUMEN

With the advent of technology, multi-energy X-ray imaging is promising technique that can reduce the patient's dose and provide functional imaging. Two-dimensional photon-counting detector to provide multi-energy imaging is under development. In this work, we present a material decomposition method using multi-energy images. To acquire multi-energy images, Monte Carlo simulation was performed. The X-ray spectrum was modeled and ripple effect was considered. Using the dissimilar characteristics in energy-dependent X-ray attenuation of each material, multiple energy X-ray images were decomposed into material depth images. Feedforward neural network was used to fit multi-energy images to material depth images. In order to use the neural network, step wedge phantom images were used for training neuron. Finally, neural network decomposed multi-energy X-ray images into material depth image. To demonstrate the concept of this method, we applied it to simulated images of a 3D head phantom. The results show that neural network method performed effectively material depth reconstruction.

Asunto(s)

RESUMEN

OBJECTIVE: This is retrospective study of clinical and radiological outcomes of anterior cervical fusion using Bongros-HA (BioAlpha, Seongnam, Korea) which is a type of synthetic hydroxyapatite (HA) spacer to evaluate the efficacy in its clinical application and usefulness as a reliable alternative to autograft bone. METHODS: Twenty-nine patients were enrolled in this study and 40 segments were involved. All patients were performed anterior cervical interbody fusion using HA spacer and plating system. Indications for surgery were radiculopathy caused by soft-disc herniation or spondylosis in 18 patients, spondylotic myelopathy in 1 patient, and spinal trauma in 10 patients. Cervical spine radiographs were obtained on postoperative 1day, 1week, and then at 1, 2, 6, and 12 months in all patients to evaluate intervertebral disc height, and the degrees of lordosis. Cervical computed tomography was done at postoperative 12 month in all patients to confirm the fusion status. The mean period of clinical follow-up was 17 months. RESULTS: Complete interbody fusion was achieved in 100% of patients. Preoperative kyphotic deformities were corrected in all cases after surgery. Intervertebral disc height was well maintained during follow up period. There were no cases of graft extrusion, graft deterioration and graft fracture. CONCLUSION: HA spacer is very efficient in achieving cervical fusion, maintaining intervertebral disc height, and restoring lordosis. When combined with the placement of a cervical plate, immediate stability can be achieved and graft related complication can be prevented.

RESUMEN

In this study, the potential for the application of the bioaugmentation to Cd and Zn contaminated sediment was investigated. A batch experiment was performed in the lake sediments augmented with Ralstonia sp. HM-1. The degradation capacity of 18.7 mg-DOC/l/day in the treatment group was bigger than that of the blank group (4.4 mg-DOC/l/day). It can be regarded as the result of the reduction of the metal concentration in the liquid phase due to adsorption into the sediments, with the increased alkalinity resulting from the reduction of sulfate by sulfate reducing bacteria (SRB). The removal efficiency of cadmium and zinc in the treatment group was both 99.7% after 35 days. Restrain of elution to water phase from sediment in the Ralstonia sp. HM-1 added treatment group was also shown. In particular, the observed reduction of the exchangeable fraction and an increase in the bound to organics or sulfide fraction in the treatment group indicate its role in the prevention of metal elution from the sediment. Therefore, for bioremediation and restrain of elution from the sediment polluted by metal, Ralstonia sp. augmentation with indigenous microorganism including SRB, sediment stabilization and restrain of elution to surface water is recommended.

Asunto(s)

RESUMEN

The cDNA nucleotide sequence of genome segment B encoding the VP1 protein was determined for the aquatic birnavirus GC1 isolated from the rockfish Sebastes schlegeli in Korea. The VP1 protein of GC1 contains a 2,538 bp open reading frame, which encodes a protein comprising 846 amino acid residues that has a predicted MW of 94 kDa. The sequence contains 6 potential Asn-X-Ser/Thr motifs. Eight potential Ser phosphorylation sites and 1 potential Tyr phophorylation site were also identified. GC1 contains the Leu-Lys-Asn (LKN) motif instead of the typical Gly-Asp-Asp (GDD) motif found in other aquatic birnaviruses. We also identified the GLPYIGKT motif, the putative GTPbinding site at amino acid position 248. In total, the VP1 regions of 22 birnavirus strains were compared for analyzing the genetic relationship among the family Birnaviridae. Based on the deduced amino acid sequences, GC1 was observed to be more closely related to the infectious pancreatic necrosis virus (IPNV) from the USA, Japan, and Korea than the IPNV from Europe. Further, aquatic birnaviruses containing GC1 and IPNV have genogroups that are distinct from those in the genus Avibirnaviruses and Entomo-birnaviruses. The birnavirusstrains were clustered into 5 genogroups based on their amino acid sequences. The marine aquatic birnaviruses (MABVs) containing GC1 were included in the MABV genogroup; the IPNV strains isolated from Korea, Japan, and the USA were included in genogroup 1 and the IPNV strains isolated primarily from Europe were included in genogroup 2. Avibirnaviruses and entomobirnaviruses were included in genogroup 3 and 4, respectively.

Asunto(s)

RESUMEN

OBJECTIVE: We investigated the potential roles of relaxin and subclinical intra-amniotic inflammation by quantitating amniotic fluid relaxin and interleukin-6 concentrations for the prediction of outcome of rescue cerclage in women with cervical incompetence. STUDY DESIGN: Cervical incompetence was diagnosed when cervical dilatation exceeded 2 cm with intact but bulging membranes and no detectable uterine activity. Each woman underwent amniocentesis to facilitate the performance of a rescue cerclage between 15 and 27 weeks of gestation (n=40 women). Forty-five additional women who underwent amniocentesis for chromosomal testing between 16 and 27 weeks of gestation served as a control group. All control patients were delivered of chromosomally normal infants at>37 weeks of gestation. All cases and control patients were singleton gestations. Interleukin-6 and relaxin were determined in all amniotic fluid samples by enzyme-linked immunosorbent assay. RESULTS: Amniotic fluid interleukin-6 levels were significantly higher in women with cervical incompetence than in control patients (control patients, 50.4 pg/mL [range, 19.4-97.4 pg/mL] vs cervical incompetence patients, 5459.1 pg/mL [range, 1131.4-14425.7 pg/mL] ; P < .001). In contrast to interleukin-6, relaxin levels did not differ between the 2 groups (control patients, 67.5 pg/mL [range, 35.1-153.5 pg/mL] vs cervical incompetence patients, 45.6 pg/mL [range, 30.1-75.5 pg/mL]; P=.061). There was a significant difference in interleukin-6 levels in women with shorter latencies (P < .01 for all latency intervals that were examined: delivery within 24 hours, 3 days, 7 days, before 33 and 37 completed weeks of gestation). Linear regression analysis with the use of the latency interval from cerclage to delivery as the dependent and with interleukin-6 as the independent variable revealed a significant inverse relationship (r=-0.62; P < .001 after log transformation of interleukin-6). There was no relationship on regression analysis between relaxin and the latency interval. CONCLUSION: Amniotic fluid interleukin-6 is increased in patients with cervical incompetence, which suggests that subclinical inflammation may contribute to cervical incompetence. Further, an elevated interleukin-6 level predicts a cerclage short-latency interval between cerclage and delivery. In contrast with interleukin-6, amniotic fluid relaxin does not appear to contribute to cervical incompetence-induced cervical dilation.

Asunto(s)