RESUMEN

Purpose: Effective mucosal delivery of drugs continues to pose a significant challenge owing to the formidable barrier presented by the respiratory tract mucus, which efficiently traps and clears foreign particulates. The surface characteristics of micelles dictate their ability to penetrate the respiratory tract mucus. In this study, polymeric micelles loaded with insulin (INS) were modified using mucus-penetrative polymers. Methods: We prepared and compared polyethylene glycol (PEG)-coated micelles with micelles where cell-penetrating peptide (CPP) is conjugated to PEG. Systematic investigations of the physicochemical and aerosolization properties, performance, in vitro release, mucus and cell penetration, lung function, and pharmacokinetics/pharmacodynamics (PK/PD) of polymeric micelles were performed to evaluate their interaction with the respiratory tract. Results: The nano-micelles, with a particle size of <100 nm, exhibited a sustained-release profile. Interestingly, PEG-coated micelles exhibited higher diffusion and deeper penetration across the mucus layer. In addition, CPP-modified micelles showed enhanced in vitro cell penetration. Finally, in the PK/PD studies, the micellar solution demonstrated higher maximum concentration (Cmax) and AUC0-8h values than subcutaneously administered INS solution, along with a sustained blood glucose-lowering effect that lasted for more than 8 h. Conclusion: This study proposes the use of mucus-penetrating micelle formulations as prospective inhalation nano-carriers capable of efficiently transporting peptides to the respiratory tract.

Asunto(s)

Péptidos de Penetración Celular , Insulina , Micelas , Polietilenglicoles , Insulina/administración & dosificación , Insulina/farmacocinética , Insulina/química , Polietilenglicoles/química , Polietilenglicoles/farmacocinética , Animales , Péptidos de Penetración Celular/química , Péptidos de Penetración Celular/farmacocinética , Humanos , Tamaño de la Partícula , Administración por Inhalación , Masculino , Portadores de Fármacos/química , Portadores de Fármacos/farmacocinética , Ratas Sprague-Dawley , Moco/química , Moco/metabolismo , Moco/efectos de los fármacos , Sistemas de Liberación de Medicamentos/métodos , Hipoglucemiantes/farmacocinética , Hipoglucemiantes/administración & dosificación , Hipoglucemiantes/química , Hipoglucemiantes/farmacología , Mucosa Respiratoria/metabolismo , Mucosa Respiratoria/efectos de los fármacos , Glucemia/efectos de los fármacos , Glucemia/análisis

RESUMEN

The aim of this study was to fabricate mini-tablets of polyhedrons containing theophylline using a fused deposition modeling (FDM) 3D printer, and to evaluate the correlation between release kinetics models and their geometric shapes. The filaments containing theophylline, hydroxypropyl cellulose (HPC), and EUDRAGIT RS PO (EU) could be obtained with a consistent thickness through pre-drying before hot melt extrusion (HME). Mini-tablets of polyhedrons ranging from tetrahedron to icosahedron were 3D-printed using the same formulation of the filament, ensuring equal volumes. The release kinetics models derived from dissolution tests of the polyhedrons, along with calculations for various physical parameters (edge, SA: surface area, SA/W: surface area/weight, SA/V: surface area/volume), revealed that the correlation between the Higuchi model and the SA/V was the highest (R2 = 0.995). It was confirmed that using 3D- printing for the development of personalized or pediatric drug products allows for the adjustment of drug dosage by modifying the size or shape of the drug while maintaining or controlling the same release profile.

RESUMEN

Dry-powder inhalers (DPIs) are valued for their stability but formulating them is challenging due to powder aggregation and limited flowability, which affects drug delivery and uniformity. In this study, the incorporation of L-leucine (LEU) into hot-melt extrusion (HME) was proposed to enhance dispersibility while simultaneously maintaining the high aerodynamic performance of inhalable microparticles. This study explored using LEU in HME to improve dispersibility and maintain the high aerodynamic performance of inhalable microparticles. Formulations with crystalline itraconazole (ITZ) and LEU were made via co-jet milling and HME followed by jet milling. The LEU ratio varied, comparing solubility, homogenization, and aerodynamic performance enhancements. In HME, ITZ solubility increased, and crystallinity decreased. Higher LEU ratios in HME formulations reduced the contact angle, enhancing mass median aerodynamic diameter (MMAD) size and aerodynamic performance synergistically. Achieving a maximum extra fine particle fraction of 33.68 ± 1.31% enabled stable deep lung delivery. This study shows that HME combined with LEU effectively produces inhalable particles, which is promising for improved drug dispersion and delivery.

RESUMEN

Multidrug-resistant (MDR) Escherichia coli poses a significant threat to public health, contributing to elevated rates of morbidity, mortality, and economic burden. This study focused on investigating the antibiotic resistance profiles, resistance and virulence gene distributions, biofilm formation capabilities, and sequence types of E. coli strains resistant to six or more antibiotic classes. Among 918 strains isolated from 33 wastewater treatment plants (WWTPs), 53.6% (492/918) demonstrated resistance, 32.5% (298/918) were MDR, and over 8% (74/918) were resistant to six or more antibiotic classes, exhibiting complete resistance to ampicillin and over 90% to sulfisoxazole, nalidixic acid, and tetracycline. Key resistance genes identified included sul2, blaTEM, tetA, strA, strB, and fimH as the predominant virulence genes linked to cell adhesion but limited biofilm formation; 69% showed no biofilm formation, and approximately 3% were strong producers. Antibiotic residue analysis detected ciprofloxacin, sulfamethoxazole, and trimethoprim in all 33 WWTPs. Multilocus sequence typing analysis identified 29 genotypes, predominantly ST131, ST1193, ST38, and ST69, as high-risk clones of extraintestinal pathogenic E. coli. This study provided a comprehensive analysis of antibiotic resistance in MDR E. coli isolated from WWTPs, emphasizing the need for ongoing surveillance and research to effectively manage antibiotic resistance.

RESUMEN

Pioglitazone is class of thiazolidinediones that activates peroxisome proliferator-activated receptors (PPARs) in adipocytes to improve glucose metabolism and insulin sensitivity and has been used as a treatment for type 2 diabetes. However, the underlying mechanisms of associated pioglitazone-induced effects remain unclear. Our study aimed to investigate endogenous metabolite alterations associated with pioglitazone administration in healthy male subjects using an untargeted metabolomics approach. All subjects received 30 mg of pioglitazone once daily in the assigned sequence and period. Urine samples were collected before pioglitazone administration and for 24 h after 7 days of administration. A total of 1465 compounds were detected and filtered using a coefficient of variance below 30% and 108 metabolites were significantly altered upon pioglitazone administration via multivariate statistical analysis. Fourteen significant metabolites were identified using authentic standards and public libraries. Additionally, pathway analysis revealed that metabolites from purine and beta-alanine metabolisms were significantly altered after pioglitazone administration. Further analysis of quantification of metabolites from purine metabolism, revealed that the xanthine/hypoxanthine and uric acid/xanthine ratios were significantly decreased at post-dose. Pioglitazone-dependent endogenous metabolites and metabolic ratio indicated the potential effect of pioglitazone on the activation of PPAR and fatty acid synthesis. Additional studies involving patients are required to validate these findings.

Asunto(s)

Voluntarios Sanos , Pioglitazona , Purinas , Tiazolidinedionas , Humanos , Masculino , Pioglitazona/farmacología , Pioglitazona/administración & dosificación , Purinas/administración & dosificación , Purinas/metabolismo , Adulto , Tiazolidinedionas/administración & dosificación , Tiazolidinedionas/farmacología , Tiazolidinedionas/efectos adversos , Metabolómica/métodos , Adulto Joven , Hipoglucemiantes/farmacología , Hipoglucemiantes/administración & dosificación

RESUMEN

BACKGROUND: Coronavirus disease 2019 (COVID-19) was first reported in December 2019 and the first case in Korea was confirmed on January 20, 2020. Due to the absence of therapeutic agents and vaccines, the Korean government implemented social distancing on February 29, 2020. This study aimed to examine the effect of physical activity (PA) on health through changes in multi-omics biomarkers with a 6-month of exercise intervention during the first wave of COVID-19 in Korea. METHODS: Twenty-seven healthy middle-aged women were recruited and 14 subjects completed the exercise intervention. The mean age (± SD) was 46.3 (± 5.33) and the mean BMI (± SD) was 24.9 (± 3.88). A total of three blood and stool samples were collected at enrollment, after period 1, and after period 2 (3-month intervals). The amount of PA was measured with an accelerometer and by questionnaire. Clinical variables were used, including blood pressure, grip strength, flexibility, and blood glucose levels and lipid markers obtained from laboratory tests. The concentration of blood metabolites was measured by targeted metabolomics. Fecal microbiome data were obtained by 16 S rRNA gene amplicon sequencing. RESULTS: During the second half period (period 2), Coronavirus disease 2019 occurred and spread out in Korea, and PA decreased compared with the first half period (period 1) (185.9 ± 168.73 min/week to 102.5 ± 82.30 min/week; p = 0.0101). Blood pressure, hemoglobin A1c (HbA1c), and low-density lipoprotein cholesterol (LDL-C) decreased in period 1 (p < 0.05) and tended to increase again during period 2 (p < 0.05). Forty metabolites were changed significantly during period 1 (FDR p < 0.05), and we found that 6 of them were correlated with changes in blood pressure, HbA1c, and LDL-C via network analysis. CONCLUSIONS: Our results may suggest that exercise improves health through changes in biomarkers at multi-omics levels. However, reduced PA due to COVID-19 can adversely affect health, emphasizing the necessity for sustained exercise and support for home-based fitness to maintain health. TRIAL REGISTRATION: The trial is retrospectively registered on ClinicalTrials.gov (NCT05927675; June 30, 2023).

RESUMEN

Coproporphyrin (CP)-I and CP-III are the markers of organic anion-transporting polypeptides' (OATPs) activities, and they are porphyrin metabolites that originate from heme synthesis. Furthermore, CP-I and CP-III, which are OATP1B endogenous metabolites, have gradually attracted the attention of scientists and researchers in recent years. Previous studies have also observed CP-I and CP-III levels as clinical biomarkers for predicting OATP1B inhibition in drug-drug interaction studies. To establish an accurate ultra-high performance liquid chromatography-mass spectrometry method for the quantitation of CP-I and CP-III, we reviewed previous methodological publications and applied them to a clinical pharmacology study using a human urine matrix. We used 13.25 M formic acid as a working solution for internal standards (CP-I 15N4 and CP-III d8) to avoid isobaric interference. The calibration curve showed good linearity in the range of 1-100 ng/mL, with a correlation coefficient (R2) higher than 0.996 in each validation batch. Both the between-run and within-run assays achieved good precision and accuracy, and we found that both CP-I and CP-III were stable in the pre-study validation. The method exhibited suitable dilution integrity, allowing for the re-analysis of samples with concentrations exceeding the upper limit of quantification through dilution. Overall, the application of the described method in a clinical study revealed that it can be utilized effectively to monitor drug-drug interactions mediated by OATP1B.

RESUMEN

Corrugated surface microparticles comprising levofloxacin (LEV), chitosan and organic acid were prepared using the 3-combo spray drying method. The amount and the boiling point of the organic acid affected the degree of roughness. In this study, we tried to improve the aerodynamic performance and increase aerosolization by corrugated surface microparticle for lung drug delivery efficiency as dry powder inhaler. HMP175 L20 prepared with 175 mmol propionic acid solution was corrugated more than HMF175 L20 prepared with 175 mmol formic acid solution. The ACI and PIV results showed a significant increase in aerodynamic performance of corrugated microparticles. The FPF value of HMP175 L20 was 41.3% ± 3.9% compared with 25.6% ± 7.7% of HMF175 L20. Corrugated microparticles also showed better aerosolization, decreased x-axial velocity, and variable angle. Rapid dissolution of drug formulations was observed in vivo. Low doses administered to the lungs achieved higher LEV concentrations in the lung fluid than high doses administered orally. Surface modification in the polymer-based formulation was achieved by controlling the evaporation rate and improving the inhalation efficiency of DPIs.

RESUMEN

Pirfenidone (PRF) is an anti-fibrotic agent that has been approved by the Food and Drug Administration (FDA) for the treatment of mild to moderate idiopathic pulmonary fibrosis. However, the current oral administration dosing regimen of PRF is complex and requires high doses. Patients are instructed to take PRF three times daily, with each dose consisting of up to three capsules or tablets (600 mg/d or 1.8 g/d of PRF) taken with food. To improve the dosing regimen, efforts are being made to develop an extended-release tablet with a zero-order release pattern. In this study, two types of extended-release matrix tablets were compared: non-channeled extended-release matrix tablets (NChMT) and channeled extended-release matrix tablets (ChMT). In vitro release tests, swelling and erosion index, rheology studies, and X-ray microcomputed tomography (XRCT), were conducted. The results indicated that ChMT maintained a zero-order release pattern with a constant release rate, while NChMT exhibited a decreased release rate in the latter half of the dissolution. ChMT exhibited accelerated swelling and erosion compared to other formulations, and this was made possible by the presence of channels within the tablet. These channels allowed for thorough wetting and swelling throughout the entire depth of the tablet. The formation of channels was confirmed through XRCT images. In conclusion, the presence of channels in ChMT tablets increased the rate of swelling and erosion, resulting in a zero-order release pattern. This development offers the potential to improve the dosage of PRF and reduce its associated side effects.

Asunto(s)

Preparaciones de Acción Retardada , Humanos , Microtomografía por Rayos X , Comprimidos , Solubilidad

RESUMEN

The conventional dosage form of Ethyol® (amifostine), a sterile lyophilized powder, involves reconstituting it with 9.7 mL of sterile 0.9% sodium chloride in accordance with the United States Pharmacopeia specifications for intravenous infusion. The purpose of this study was to develop inhalable microparticles of amifostine (AMF) and compare the physicochemical properties and inhalation efficiency of AMF microparticles prepared by different methods (jet milling and wet ball milling) and different solvents (methanol, ethanol, chloroform, and toluene). Inhalable microparticles of AMF dry powder were prepared using a wet ball-milling process with polar and non-polar solvents to improve their efficacy when delivered through the pulmonary route. The wet ball-milling process was performed as follows: AMF (10 g), zirconia balls (50 g), and solvent (20 mL) were mixed and placed in a cylindrical stainless-steel jar. Wet ball milling was performed at 400 rpm for 15 min. The physicochemical properties and aerodynamic characteristics of the prepared samples were evaluated. The physicochemical properties of wet-ball-milled microparticles (WBM-M and WBM-E) using polar solvents were confirmed. Aerodynamic characterization was not used to measure the % fine particle fraction (% FPF) value in the raw AMF. The % FPF value of JM was 26.9 ± 5.8%. The % FPF values of the wet-ball-milled microparticles WBM-M and WBM-E prepared using polar solvents were 34.5 ± 0.2% and 27.9 ± 0.7%, respectively; while the % FPF values of the wet-ball-milled microparticles WBM-C and WBM-T prepared using non-polar solvents were 45.5 ± 0.6% and 44.7 ± 0.3%, respectively. Using a non-polar solvent in the wet ball-milling process resulted in a more homogeneous and stable crystal form of the fine AMF powder than using a polar solvent.

RESUMEN

Airborne particulate matter has been designated as a class 1 carcinogen by the World Health Organization. Nitrate is a toxic substance that accounts for a large proportion of particulate matter, and nitrate toxicity has long been reported. In this study, we aimed to optimize the adsorption and removal of particulate matter containing nitrate for effective elimination by the lungs. To this end, particles were designed to optimize the inhalation and removal efficiencies. These particles were prepared as chitosan-based particles containing N-acetylcysteine by using emulsion diffusion methods. Chitosan adsorbs nitrate, while N-acetylcysteine dissolves mucus. This removal mechanism has been found to occur in various in vitro models that mimic respiratory environments and in vivo models. In particular, the removal of exogenous substances, such as particulate matter, by the motility of respiratory cilia through mucolytic effect was investigated. This new approach for the adsorption and elimination of toxic substances entering the lungs represents an alternative defense mechanism against exposure to nitrates from air pollution.

Asunto(s)

Contaminantes Atmosféricos , Quitosano , Material Particulado , Nitratos , Adsorción , Óxido Ferrosoférrico , Acetilcisteína

RESUMEN

Purpose: This study aimed to ensure the convenience of administration and reproducibility of efficacy, regardless of the meal, by improving the solubility of rivaroxaban (RIV). Methods: RIV is a non-vitamin K antagonist oral anticoagulants that exhibits a coagulation effect by directly inhibiting coagulation factor Xa. However, RIV has a very low solubility; therefore, it must be administered with a meal at high doses. We used a drug- hydroxypropyl-beta-cyclodextrin (CD)-water-soluble polymer triple complex (R-C-P complex) to solubilize RIV. Using Minitab, we evaluated the effect of each factor on RIV solubility and developed an optimal R-C-P complex formulation. The amount of CD, amount of polymer, and polymer type were set as the independent variables X1, X2, and X3, respectively. RIV solubility (Y1) and dissolution rate for 45 min in pH 4.5 medium (Y2) and pH 1.2 medium (Y3) were set as response variables. Results: The most efficient RIV solubilization effect was obtained from the composition using CD and HPMC 2208, and physicochemical properties and dissolution parameters were analyzed. RIV in the R-C-P complex was present in an amorphous form and showed high solubility. Unlike commercial products, it showed a 100% dissolution rate. The R-C-P complex formulation secured high RIV solubility and 100% release regardless of pH. Conclusion: The results imply that high-dose RIV can be administered regardless of the meal, reducing the risk of changing the drug effect due to the patient's administration mistake.

Asunto(s)

Ciclodextrinas , Rivaroxabán , Humanos , Solubilidad , Reproducibilidad de los Resultados , Ciclodextrinas/química , Preparaciones Farmacéuticas , 2-Hidroxipropil-beta-Ciclodextrina , Polímeros

RESUMEN

Pirfenidone (PRF) is the first FDA-approved API in the treatment of idiopathic pulmonary fibrosis (IPF). However, PRF induces serious side effects, such as photophobia and gastrointestinal disorder. PRF inhalation can be expected with a lower effective dose and reduced side effects. In this study, PRF was prepared as inhalable co-spray-dried particles for dry powder inhalation. Mannitol, L-leucine (Leu), and NaCl were used as a stabilizer. The kinds and ratios of stabilizers affecting the physicochemical properties of particles were analyzed, including particle size and surface composition, because of the surface enrichment properties of Leu, the most effective stabilizer. The co-spray-dried PRF and Leu microparticle (SD-PL1:1) have the smallest size and highest aerosol performance. The bioavailability was confirmed by in vivo pharmacokinetics (PK) studies. In addition, in vivo pharmacodynamics (PD) experiments were conducted using a bleomycin-induced IPF rat model. In vivo PK experiments demonstrated that pulmonary administration of SD-PL1:1 was 4 times more effective than the oral route. Similar to the PK results, the therapeutic effect was improved when SD-PL1:1 was administered via the pulmonary route compared to the oral route.

Asunto(s)

Efectos Colaterales y Reacciones Adversas Relacionados con Medicamentos , Piridonas , Ratas , Animales , Piridonas/farmacología , Disponibilidad Biológica , Bleomicina , Excipientes

RESUMEN

Pirfenidone (PRF), the first FDA-approved drug to treat idiopathic pulmonary fibrosis (IPF) and formulated as an oral dosage form, has many side effects. To enhance the therapeutic effect, we discovered a high-load nanoemulsion using a novel deep eutectic solvent (DES) and developed an inhalation drug with improved bioavailability. The DES of PRF and N-acetylcysteine were discovered, and their physicochemical properties were evaluated in this study. The mechanism of DES formation was confirmed by FT-IR and 1H NMR and suggested to involve hydrogen bonding. The DES nanoemulsion in which the nano-sized droplets were dispersed is optimized by mixing the DES and distilled water in a ratio. The in vivo pharmacokinetic study showed that the pulmonary route of administration is superior to that of the oral route, and the DES nanoemulsion is superior to that of the PRF solution in achieving better bioavailability and lung distribution. The therapeutic effect of PRF for IPF could be confirmed through in vivo pharmacodynamics studies, including lung function assessment, enzyme-linked immunosorbent assay, histology, and micro-computed tomography using the bleomycin-induced IPF rat model. In addition, the pulmonary route administration of PRF is advantageous in reducing the toxicity risk.

Asunto(s)

Fibrosis Pulmonar Idiopática , Ratas , Animales , Fibrosis Pulmonar Idiopática/tratamiento farmacológico , Disolventes Eutécticos Profundos , Espectroscopía Infrarroja por Transformada de Fourier , Microtomografía por Rayos X , Piridonas/uso terapéutico

RESUMEN

Idiopathic inflammatory myopathy (IIM) is hard to diagnose without a muscle biopsy. We aimed to identify a metabolite panel for IIM detection by metabolomics approach in serum samples and to explore the metabolomic signature in tissue samples from a mouse model. We obtained serum samples from IIM patients, ankylosing spondylitis (AS) patients, healthy volunteers and muscle tissue samples from IIM murine model. All samples were subjected to a targeted metabolomic approach with various statistical analyses on serum and tissue samples to identify metabolic alterations. Three machine learning methods, such as logistic regression (LR), support vector machine (SVM), and random forest (RF), were applied to build prediction models. A set of 7 predictive metabolites was calculated using backward stepwise selection, and the model was evaluated within 5-fold cross-validation by using three machine algorithms. The model produced an area under the receiver operating characteristic curve values of 0.955 (LR), 0.908 (RF) and 0.918 (SVM). A total of 68 metabolites were significantly changed in mouse tissue. Notably, the most influential pathways contributing to the inflammation of muscle were the polyamine pathway and the beta-alanine pathway. Our metabolomic approach offers the potential biomarkers of IIM and reveals pathologically relevant metabolic pathways that are associated with IIM.

RESUMEN

Purpose: Based on the theory of unpleasant symptoms (TOUS), this study aimed to examine the direct effect of antecedent factors on health-related quality of life (HRQoL) and its indirect effect via symptoms in Korean women during the late menopausal transition (MT) and early postmenopause. Methods: This cross-sectional survey employed a descriptive correlational research design. The respondents were 152 middle-aged women 40 to 60 years with an intermenstrual interval of 60 days or more (late MT) or less than 5 years from the last menstrual period (early postmenopause). The respondents were recruited through convenience sampling in Busan, Korea, from December 1, 2020, to January 31, 2021. Based on the TOUS, self-report data were collected on perceived health status, psychological distress, social support, menopausal symptoms, and HRQoL. The collected data were analyzed using descriptive statics, independent t-test, one-way analysis of variance, Pearson's correlation coefficient, and the Hayes' PROCESS macro. Results: TOUS was supported on this sample (n=152) of Korean women during the late MT and early postmenopause. Perceived health status, psychological distress, and social support had significant direct relationships with HRQoL. Menopausal symptoms had significant indirect relationships between antecedent factors (perceived health status, psychological distress, and social support) and partially mediated HRQoL. Conclusion: The findings of this study indicate that menopausal symptoms play an important role as an intervening factor of HRQoL in women during the late MT and early postmenopause. Therefore, women need an integrated program that manages antecedent factors and menopausal symptoms to improve HRQoL in these menopausal stages.

RESUMEN

Introduction: Dry powder inhalations are an attractive pharmaceutical dosage form. They are environmentally friendly, portable, and physicochemical stable compared to other inhalation forms like pressurized metered-dose inhalers and nebulizers. Sufficient drug deposition of DPIs into the deep lung is required to enhance the therapeutic activity. Nanoscale surface roughness in microparticles could improve aerosolization and aerodynamic performance. This study aimed to prepare microspheres with nanoscale dimples and confirm the effect of roughness on inhalation efficiency. Methods: The dimpled-surface on microspheres (MSs) was achieved by oil in water (O/W) emulsion-solvent evaporation by controlling the stirring rate. The physicochemical properties of MSs were characterized. Also, in vitro aerodynamic performance of MSs was evaluated by particle image velocimetry and computational fluid dynamics. Results: The particle image velocimetry results showed that dimpled-surface MSs had better aerosolization, about 20% decreased X-axial velocity, and a variable angle, which could improve the aerodynamic performance. Furthermore, it was confirmed that the dimpled surface of MSs could cause movement away from the bronchial surface, which helps the MSs travel into the deep lung using computational fluid dynamics. Conclusion: The dimpled-surface MSs showed a higher fine particle fraction value compared to smooth-surface MSs in the Andersen Cascade Impactor, and surface roughness like dimples on microspheres could improve aerosolization and lung deposition.

Asunto(s)

Budesonida , Inhaladores de Polvo Seco , Administración por Inhalación , Aerosoles/química , Microesferas , Tamaño de la Partícula , Polvos/química

RESUMEN

This study aimed to prepare mucus-penetrating inhalable microparticles for dry powder inhalers and to evaluate their applicability in an asthma-induced rat model. Microparticles were prepared from water solutions containing tiotropium bromide, L-leucine, and sodium glycocholate (NaGc) as permeation enhancers using the spray drying method. Four formulations (SDL1, SDL2, SDL3, and SDL4) were used, depending on the various NaGc concentrations. Tiotropium microparticles were characterized by standard methods. Additionally, an asthma-induced rat model was used to confirm the effects of the formulations on lung function. Tiotropium microparticles with NaGc resulted in formulations with a more corrugated morphology and smaller particle size distribution than those without NaGc. SDL 1 had a rough surface with irregular morphology, and SDL 2, 3, and 4 had a corrugated morphology. All SDL formulations had an aerodynamic size of <3 µm. The microparticles with a corrugated morphology aerosolized better than SDL1 microparticles. The apparent permeability coefficient (Papp) values of SDL3 and SDL4 were significantly higher than those for raw tiotropium. In an in vivo study using an asthma-induced rat model, the specific airway resistance (Sraw), airway wall thickness, and mean alveolus size recovered to those of the negative control group in the SDL4 formulation.

RESUMEN

Esomeprazole magnesium (EMP) is a proton pump inhibitor (PPI) that reduces acid secretion. EMP has a short plasma half-life (approximately 1.3 h); hence, nocturnal acid breakthrough (NAB) frequently occurs, disturbing the patient's nighttime comfort and sleep. We aimed to develop a novel esomeprazole magnesium-loaded dual-release mini-tablet polycap (DR polycap) with a prolonged onset time and improved bioavailability to prevent NAB. The formulation of the EPM mini-tablet core resulted in rapid drug release. The core was coated with an inner coating and an Eudragit® L30D-55 aqueous dispersion coating to prepare the first-release mini-tablet. In addition, the core was coated with an inner coating and an aqueous dispersion of Eudragit® S100 and Eudragit® L100 coating to prepare the second-release mini-tablet. Each mini-tablet type was characterized using an in vitro dissolution test and microscopic examination. After testing, 10 of each mini-tablets were placed together in hard capsules to form DR polycaps. The combination of mini-tablets was optimized via in vitro release testing and in vivo pharmacokinetic studies. The AUC0-24h of the DR polycap was similar to that of a comparable commercial product (Nexium®); Cmax was lower by approximately 50%, and Tmax was extended by approximately 1.7-fold. In conclusion, DR polycap is an alternative to commercial products with improved NAB and dosing compliance because of its dual-release characteristics.

RESUMEN

The authors wish to make the following corrections to this paper [...].