RESUMEN

In order to relieve pain due to oral mucositis, we attempted to develop mucoadhesive microparticles containing indomethacin (IM) and gel preparations with IM microparticles that can be applied to the oral cavity. The mucoadhesive microparticles were prepared with a simple composition consisting of IM and polyvinyl alcohol (PVA). Two kinds of PVA with different block properties were used, and microparticles were prepared by heating-filtration and mixing-drying. From the X-ray powder diffraction patterns, differential scanning calorimetry thermograms, and morphological features of the IM microparticles, IM should exist as polymorphic forms in the microparticles. Rapid drug release properties were observed in the IM microparticles. Increased drug retention was observed in IM microparticles containing PVA, and the IM-NK(50) gel, using a common block character PVA and heating-filtration, showed good long-term drug retention properties. In vivo experiments showing significantly higher drug concentrations in the oral mucosa were observed with IM microparticles prepared by heating-filtration, and the IM-NK(50) gel maintained significantly higher drug concentrations in the oral mucosa. From these results, the IM-NK(50) gel may be useful as a preparation for relieving oral mucositis pain.

RESUMEN

Emulsions for oral delivery are not suitable for sustained drug absorption because such preparations diffuse rapidly in the gastrointestinal (GI) tract after oral administration. In order to generate sustained drug absorption and increase oral bioavailability, various polymers were added to a morin (MO) nanoemulsion to improve retention in the GI tract and alter the surface properties of oil droplets in the nanoemulsion. The influence of these polymers on the formulation properties was investigated. The area under the blood concentration-time curve (AUC) and the mean residence time (MRT) after oral administration of the nanoemulsions were measured, and the influence of the polymers on bioavailability was investigated. Chitosan (Chi) addition MO nanoemulsion (MO-Chi nanoemulsion) showed the highest AUC and MRT. MO-Chi nanoemulsion increased retention in the GI tract because of the relatively higher viscosity and high affinity between mucin and Chi covering the oil droplets. Furthermore, MO-Chi nanoemulsion could maintain the drug in oil droplets by suppression of drug release through the polymer hydration layer, and sustained drug release achieved continuous drug absorption. Nanoemulsions with sodium carboxymethylcellulose and poly-γ-glutamic acid potassium salt showed the next highest AUC and MRT after MO-Chi nanoemulsion. From these results, it was suggested that by increasing the viscosity of the nanoemulsion, there was high affinity between the added polymer and mucin, and sustained drug release was useful for enhancing the bioavailability of the polymer-containing nanoemulsions.

Asunto(s)

RESUMEN

The aim of the present study was to investigate the influence of polysorbate 60 (Tween 60) on the development of morin-loaded nanoemulsions to improve the oral bioavailability of morin. Nanoemulsions were prepared using Tween 60 and polyvinyl alcohol (PVA) as emulsifiers, and medium chain triglycerides (MCT) as the lipid base. Low-saponification-degree PVA (LL-810) was also added to stabilize dispersed droplets. MCT-LL810 nanoemulsion containing LL-810 was prepared with a reduced amount of Tween 60. However, the area under the blood concentration-time curve (AUC) of MCT-LL810 (0.18) nanoemulsion containing a small amount of Tween 60 did not increase because the absorption of morin was limited by P-glycoprotein (P-gp)-mediated efflux. MCT-LL810 (0.24) nanoemulsion containing a large amount of Tween 60 showed the highest AUC, dispersed droplets containing Tween 60 may have been transported into epithelial cells in the small intestine, and P-gp transport activity appeared to be suppressed by permeated Tween 60. Based on the plasma concentration profile, dispersed droplets in MCT-LL810 (0.24) nanoemulsion permeated more rapidly through the mucus layer and the intestinal membrane than MCT (0.24) nanoemulsion without LL-810. In conclusion, a novel feature of Tween 60 incorporated into the dispersed droplets of a nanoemulsion interacting with P-gp was demonstrated herein. Dispersed droplets in MCT-LL810 (0.24) nanoemulsion containing LL-810 permeated rapidly through the mucus layer and intestinal membrane, and Tween 60 incorporated in dispersed droplets interacted with P-gp-mediated efflux, increasing the bioavailability of morin.

Asunto(s)

RESUMEN

The purpose of the present work was to evaluate polyvinyl alcohols (PVAs) as a mucoadhesive polymer for mucoadhesive buccal tablets prepared by direct compression. Various polymerization degree and particle diameter PVAs were investigated for their usability. The tensile strength, in vitro adhesive force, and water absorption properties of the tablets were determined to compare the various PVAs. The highest values of the tensile strength and the in vitro adhesive force were observed for PVAs with a medium viscosity and small particle size. The optimal PVA was identified by a factorial design analysis. Mucoadhesive tablets containing the optimal PVA were compared with carboxyvinyl polymer and hydroxypropyl cellulose formulations. The optimal PVA gives a high adhesive force, has a low viscosity, and resulted in relatively rapid drug release. Formulations containing carboxyvinyl polymer had high tensile strengths but short disintegration times. Higher hydroxypropyl cellulose concentration formulations had good adhesion forces and very long disintegration times. We identified the optimal characteristics of PVA, and the usefulness of mucoadhesive buccal tablets containing this PVA was suggested from their formulation properties.

Asunto(s)

RESUMEN

In this study, solid lipid nanoparticle (SLN) suspensions were prepared using a base of hard fat with or without ethylcellulose (EC) and polyvinyl alcohols (PVA) and polysorbate (Tween) 60 surfactants. Commercially available PVAs vary in their degree of saponification and polymerization, and the appropriate PVAs to form SLNs from hard fat with or without EC were investigated. A relatively low-saponification-degree PVA was required to reproducibly form SLN suspensions without EC and relatively high-saponification-degree PVAs were suitable for SLNs with EC. The release of morin from SLNs with EC was more sustained than that from SLNs without EC. The maximum plasma concentration (Cmax) of SLNs with and without EC were almost the same, and both were higher than that of a morin suspension. The area under the curve for 0 to 360 min (AUC0-360) of SLNs with EC was increased compared with those of a morin suspension and SLNs without EC. The median diameter of SLNs with EC and a very low-saponification-degree PVA was decreased compared to other formulation, and morin release was more sustained for this formulation. SLNs with EC and a very low-saponification-degree PVA showed higher Cmax and AUC0-360 than SLNs with EC lacking a very low-saponification-degree PVA. The optimized SLNs with EC and a very low-saponification-degree PVA improved bioavailability via increased accessibility to the enterocyte surface by decreased particle size and increased permeation of SLN encapsulated morin through the intestinal membrane by sustained release properties.

Asunto(s)

RESUMEN

The substituent effect on the thermal denitrogenation mechanism of 7,7-disubstituted 2,3-diazabicyclo[2.2.1]hept-2-enes, concerted versus stepwise, has been investigated in detail. Unrestricted DFT calculations at the B3LYP/6-31G(d) level of theory suggest that azoalkanes that possess electron-withdrawing substituents at C(7) prefer to expel the nitrogen molecule in a stepwise manner. The activation energy is calculated to be ca. 36 kcal/mol for the dihydroxy-substituted azoalkane. In contrast, the preferred mechanism of the concerted denitrogenation is predicted for azoalkanes that possess electron-donating substituents at C(7). The activation energy is computed to be ca. 28 kcal/mol for the silyl-substituted azoalkane. The theoretical prediction of the substituent effects on the mechanistic change is supported by analyzing the activation parameters of the azoalkane decompositions. The activation enthalpy for the decomposition of the 7,7-diethoxy-substituted azoalkane is determined to be 39.1 kcal/mol, which is 13.1 kcal/mol higher in energy for the denitrogenation of the 7-silyl-substituted azoalkane. These dramatic substituent effects can be reasonably explained by the preferred electronic configuration of the lowest singlet state of the cyclopentane-1,3-diyls produced during the denitrogenation of the azoalkanes.

RESUMEN

UDFT and CASSCF calculations with the 6-31G(d) basis set were performed to investigate the heavier group 14 element (M) effect on the ground-state spin multiplicity of cyclopentane-1,3-diyls and their reactivity. The calculations find that 2-metallacyclopentane-1,3-diyls (M = Si, Ge) that possess a variety of substituents (X = H, Me, F, OR, SiH(3)) at M(2) are singlet ground-state molecules. The energies of the 1,3-diphenyl-substituted singlet 2-silacyclopentane-1,3-diyls are calculated to be ca. 5 kcal/mol lower than those of the intramolecular ring-closure products, i.e., 1,4-diphenyl-5-silabicyclo[2.1.0]pentanes, at the B3LYP/6-31G(d) level of theory. The energy barrier for the disrotatory ring closure of singlet 2,2-dimethyl-1,3-diphenyl-2-silacyclopentane-1,3-diyl (lambda(calcd) = 757 nm, f = 1.01 at RCIS/6-31G(d)) to the corresponding 5-silabicyclo[2.1.0]pentane is computed to be 11.6 kcal/mol, which is 13.1 kcal/mol lower in energy than that for the conrotatory ring-opening to a 3-silapenta-1,4-diene. The computational work predicts that singlet 1,3-diaryl-2-silacyclopentane-1,3-diyls are persistent molecules under conditions without trapping agents.

RESUMEN

Generation of singlet and triplet 2-silylcyclopentane-1,3-diyls and their reactivity have been investigated in the thermal and photochemical denitrogenation of 2,3-diaza-7-silylbicyclo[2.2.1]hept-2-ene. 5-Silylcyclopentene (silyl migration product) is quantitatively obtained, while 5-silylbicyclo[2.1.0]pentane (intramolecular ring-closure product) is not detected in the denitrogenation reactions. Deuterium labeling studies clarify that 5-silylcyclopentene is formed by a suprafacial [1,2] silyl migration in singlet 2-silylcyclopentane-1,3-diyl. UDFT calculations closely reproduce the observed reactivity of the singlet diradical: The enthalpic barriers of the intramolecular ring-closure are calculated to be DeltaH++exo468 = 5.8 kcal/mol and DeltaH++endo468 = 6.7 kcal/mol, which are much higher than the energy barrier for the [1,2] silyl migration, DeltaH++468 = 2.7 kcal/mol. The notable effect of the silyl group on raising the energy barrier of the intramolecular cyclization is rationalized by an electronic configuration of the lowest singlet state of 2-silylcyclopentane-1,3-diyls.

RESUMEN

DFT calculations (UB3LYP/6-31+G**) have been performed to predict the substituent effect on the ground-state spin-multiplicity and the singlet-triplet energy gap in cyclobutane-1,3-diyls, CB-DR. The ground state is calculated to be largely dependent on the substituents (X, Y) at the C2 and C4 positions. The substituent effects can be reasonably explained by the two sets of through-bond (TB) interactions which result from the coupling between the symmetric nonbonding molecular orbital (Psi(S)) and the C-X (Y) sigma and sigma* orbitals.