RESUMEN
Under large quasi-static loads, the incudo-malleolar joint (IMJ), connecting the malleus and the incus, is highly mobile. It can be classified as a mechanical filter decoupling large quasi-static motions while transferring small dynamic excitations. This is presumed to be due to the complex geometry of the joint inducing a spatial decoupling between the malleus and incus under large quasi-static loads. Spatial Laser Doppler Vibrometer (LDV) displacement measurements on isolated malleus-incus-complexes (MICs) were performed. With the malleus firmly attached to a probe holder, the incus was excited by applying quasi-static forces at different points. For each force application point the resulting displacement was measured subsequently at different points on the incus. The location of the force application point and the LDV measurement points were calculated in a post-processing step combining the position of the LDV points with geometric data of the MIC. The rigid body motion of the incus was then calculated from the multiple displacement measurements for each force application point. The contact regions of the articular surfaces for different load configurations were calculated by applying the reconstructed motion to the geometry model of the MIC and calculate the minimal distance of the articular surfaces. The reconstructed motion has a complex spatial characteristic and varies for different force application points. The motion changed with increasing load caused by the kinematic guidance of the articular surfaces of the joint. The IMJ permits a relative large rotation around the anterior-posterior axis through the joint when a force is applied at the lenticularis in lateral direction before impeding the motion. This is part of the decoupling of the malleus motion from the incus motion in case of large quasi-static loads.
Asunto(s)
Yunque/fisiología , Martillo/fisiología , Hueso Temporal/fisiología , Adulto , Anciano , Fenómenos Biomecánicos , Elasticidad , Humanos , Persona de Mediana Edad , Movimiento (Física) , Estrés Mecánico , Vibración , Viscosidad , Microtomografía por Rayos XRESUMEN
The annular ligament provides a compliant connection of the stapes to the oval window. To estimate the stiffness characteristics of the annular ligament, human temporal bone measurements were conducted. A force was applied sequentially at several points on the stapes footplate leading to different patterns of displacement with different amounts of translational and rotational components. The spatial displacement of the stapes footplate was measured using a laser vibrometer. The experiments were performed on several stapes with dissected chain and the force was increased stepwise, resulting in load-deflection curves for each force application point. The annular ligament exhibited a progressive stiffening characteristic in combination with an inhomogeneous stiffness distribution. When a centric force, orientated in the lateral direction, was applied to the stapes footplate, the stapes head moved laterally and in the posterior-inferior direction. Based on the load-deflection curves, a mechanical model of the annular ligament was derived. The mathematical representation of the compliance of the annular ligament results in a stiffness matrix with a nonlinear dependence on stapes displacement. This description of the nonlinear stiffness allows simulations of the sound transfer behavior of the middle ear for different preloads.
Asunto(s)
Ligamentos/fisiología , Modelos Biológicos , Ventana Oval/fisiología , Estribo/fisiología , Fenómenos Biomecánicos , Elasticidad , Humanos , Técnicas In Vitro , Movimiento , Dinámicas no Lineales , Presión , Estrés Mecánico , Hueso Temporal/fisiología , Factores de TiempoRESUMEN
The piston-like (translation normal to the footplate) and rocking-like (rotation along the long and short axes of the footplate) are generally accepted as motion components of the human stapes. It has been of issue whether in-plane motions, i.e., transversal movements of the footplate in the oval window, are comparable to these motion components. In order to quantify the in-plane motions the motion at nine points on the medial footplate was measured in five temporal bones with the cochlea drained using a three-dimensional (3D) laser Doppler vibrometer. It was found that the stapes shows in-plane movements up to 19.1 ± 8.7% of the piston-like motion. By considering possible methodological errors, i.e., the effects of the applied reflective glass beads and of alignment of the 3D laser Doppler system, such value was reduced to be about 7.4 ± 3.1%. Further, the in-plane motions became minimal (≈ 4.2 ± 1.4% of the piston-like motion) in another plane, which was anatomically within the footplate. That plane was shifted to the lateral direction by 118 µm, which was near the middle of the footplate, and rotated by 4.7° with respect to the medial footplate plane.