RESUMEN
The recent technology of transfer printing using various membrane-type flexible/stretchable electronic devices can provide electronic functions to desirable objects where direct device fabrication is difficult. However, if the target surfaces are rough and complex, the capability of accommodating surface mismatches for reliable interfacial adhesion remains a challenge. Here, we demonstrate that newly designed nanotubular cilia (NTCs), vertically aligned underneath a polyimide substrate, significantly enhance interfacial adhesion. The tubular structure easily undergoes flattening and wrapping motions to provide a large conformal contact area, and the synergetic effect of the assembled cilia strengthens the overall adhesion. Furthermore, the hierarchical structure consisting of radially spread film-type cilia combined with vertically aligned NTCs in specific regions enables successful transfer printing onto very challenging surfaces such as stone, bark, and textiles. Finally, we successfully transferred a temperature sensor onto an eggshell and indium gallium zinc oxide-based transistors onto a stone with no electrical failure.
RESUMEN
Electronic textile (e-textile) allows for high-end wearable electronic devices that provide easy access for carrying, handling and using. However, the related technology does not seem to be mature because the woven fabric hampers not only the device fabrication process directly on the complex surface but also the transfer printing of ultrathin planar electronic devices. Here we report an indirect method that enables conformal wrapping of surface with arbitrary yet complex shapes. Artificial cilia are introduced in the periphery of electronic devices as adhesive elements. The cilia also play an important role in confining a small amount of glue and damping mechanical stress to maintain robust electronic performance under mechanical deformation. The example of electronic applications depicts the feasibility of cilia for 'stick-&-play' systems, which provide electronic functions by transfer printing on unconventional complex surfaces.
RESUMEN
Introducing two-dimensional post arrays and a water-soluble sacrificial layer between an ultrathin substrate and a handling substrate provides controllability of the interfacial adhesion in a stable manner. The periodically anchored and suspended configuration after the chemical etching process facilitates the development of, for example, printable Alq3 -based OLEDs that can be attached to unconventional surfaces.
RESUMEN
A highly flexible and transparent transistor is developed based on an exfoliated MoS2 channel and CVD-grown graphene source/drain electrodes. Introducing the 2D nanomaterials provides a high mechanical flexibility, optical transmittance (â¼74%), and current on/off ratio (>10(4)) with an average field effect mobility of â¼4.7 cm(2) V(-1) s(-1), all of which cannot be achieved by other transistors consisting of a MoS2 active channel/metal electrodes or graphene channel/graphene electrodes. In particular, a low Schottky barrier (â¼22 meV) forms at the MoS2 /graphene interface, which is comparable to the MoS2 /metal interface. The high stability in electronic performance of the devices upon bending up to ±2.2 mm in compressive and tensile modes, and the ability to recover electrical properties after degradation upon annealing, reveal the efficacy of using 2D materials for creating highly flexible and transparent devices.