RESUMEN
The effect of ultrafine fly ash (UFA) and fly ash (FA) on the physical properties, phase assemblage, and microstructure of magnesium potassium phosphate cement (MKPC) was investigated. This study revealed that the UFA addition does not affect the calorimetry hydration peak associated with MKPC formation when normalized to the reactive components (MgO and KH2PO4). However, there is an indication that greater UFA additions lead to an increased reaction duration, suggesting the potential formation of secondary reaction products. The addition of a UFA:FA blend can delay the hydration and the setting time of MKPC, enhancing workability. MgKPO4·6H2O was the main crystalline phase observed in all systems; however, at low replacement levels in the UFA-only system (<30 wt %), Mg2KH(PO4)2·15H2O was also observed by XRD, SEM/EDS, TGA, and NMR (31P MAS, 1H-31P CP MAS). Detailed SEM/EDS and MAS NMR investigations (27Al, 29Si, 31P) demonstrated that the role of UFA and UFA:FA was mainly as a filler and diluent. Overall, the optimized formulation was determined to contain 40 wt % fly ash (10 wt % UFA and 30 wt % FA (U10F30)), which achieved the highest compressive strength and fluidity and produced a dense microstructure.
RESUMEN
Radioactive waste streams containing 90Sr, from nuclear power generation and environmental cleanup operations, are often immobilised in cements to limit radionuclide leaching. Due to poor compatibility of certain wastes with Portland cement, alternatives such as alkali aluminosilicate 'geopolymers' are being investigated. Here, we show that the disordered geopolymers ((N,K)-A-S-H gels) formed by alkali-activation of metakaolin can readily accommodate the alkaline earth cations Sr2+ and Ca2+ into their aluminosilicate framework structure. The main reaction product identified in gels cured at both 20⯰C and 80⯰C is a fully polymerised Al-rich (N,K)-A-S-H gel comprising Al and Si in tetrahedral coordination, with Si in Q4(4Al) and Q4(3Al) sites, and Na+ and K+ balancing the negative charge resulting from Al3+ in tetrahedral coordination. Faujasite-Na and partially Sr-substituted zeolite Na-A form within the gels cured at 80⯰C. Incorporation of Sr2+ or Ca2+ displaces some Na+ and K+ from the charge-balancing sites, with a slight decrease in the Si/Al ratio of the (N,K)-A-S-H gel. Ca2+ and Sr2+ induce essentially the same structural changes in the gels. This is important for understanding the mechanism of incorporation of Sr2+ and Ca2+ in geopolymer cements, and suggests that geopolymer gels are excellent candidates for immobilisation of radioactive waste containing 90Sr.
RESUMEN
This study evaluates the chloride binding capacity and the migration of chloride in sodium carbonate-activated slag cements and mortars. The effect on chloride mobility and binding of adding a calcined layered double hydroxide (CLDH) to the binder mix was also assessed. Significantly improved durability characteristics can be achieved for sodium carbonate-activated slag mortars by the addition of small fractions of CLDH, as a consequence of a higher degree of reaction, higher chloride binding capacity, and the refined pore structures present in these modified materials, in comparison with alkali-activated cements produced without CLDH. The addition of CLDH enables the production of sodium carbonate-activated slag cements with notably reduced chloride ingress compared to silicate activated slag cements.