RESUMEN

BACKGROUND: Krüppel-like factor 15 (KLF15) has been reported to be involved in ischemia injury of multiple types of diseases. Nevertheless, the roles and underlying mechanisms of KLF15 in preeclampsia (PE) are still unclear. METHODS: In this study, the expression of KLF15 in placenta tissues and hypoxia/reoxygenation (H/R)-induced HTR8/SVneo cells was evaluated by GSE66273 database, qRT-PCR and western blot assay. CCK-8 assay was employed to detect cell proliferation. Wound healing assay and transwell assay were used to detect cell migration and invasion. Cell oxidative stress was measured by DCFH-DA staining and kits. Cell apoptosis was evaluated by TUNEL assay and western blot assay. The JASPAR database was used to analyze the binding site of KLF15 and insulin-like growth factor-1 receptor (IGF1R) promoter region. The luciferase reporter assay was used to detect IGF1R promoter activity and ChIP assay was used to verify the combination of KLF15 and IGF1R promoter. Moreover, western blot was employed to measure the expressions of PI3K/Akt-related proteins. RESULTS: The data showed that the expression of KLF15 was significantly downregulated in GSE66273 database, tissues and HTR8/SVneo cells. KLF15 overexpression increased H/R-induced HTR8/SVneo cell proliferation, invasion and migration, and inhibited oxidative stress and cell apoptosis. In addition, IGF1R was highly expressed in H/R-induced HTR8/SVneo cells after KLF15 overexpression, and the binding of KLF15 and IGF1R promoter was verified. Silencing of IGF1R reversed the effects of KLF15 overexpression on H/R-induced HTR8/SVneo cell proliferation, migration, invasion, oxidative stress and cell apoptosis. Moreover, KLF15 overexpression and IGF1R silencing regulated the expressions of PI3K/Akt-related proteins in H/R-induced HTR8/SVneo cells. CONCLUSION: In conclusion, KLF15 overexpression promoted the proliferation and metastasis, and suppressed oxidative stress and cell apoptosis of H/R-induced HTR8/SVneo cells through mediating the PI3K/Akt pathway, which may provide a promising target for the treatment of preeclampsia.

Asunto(s)

Apoptosis , Movimiento Celular , Factores de Transcripción de Tipo Kruppel , Estrés Oxidativo , Receptor IGF Tipo 1 , Trofoblastos , Humanos , Factores de Transcripción de Tipo Kruppel/metabolismo , Factores de Transcripción de Tipo Kruppel/genética , Apoptosis/genética , Movimiento Celular/genética , Receptor IGF Tipo 1/metabolismo , Receptor IGF Tipo 1/genética , Trofoblastos/metabolismo , Trofoblastos/patología , Estrés Oxidativo/genética , Femenino , Embarazo , Factores de Transcripción de la Respuesta de Crecimiento Precoz/metabolismo , Factores de Transcripción de la Respuesta de Crecimiento Precoz/genética , Proteínas Proto-Oncogénicas c-akt/metabolismo , Transducción de Señal , Línea Celular , Fosfatidilinositol 3-Quinasas/metabolismo , Preeclampsia/metabolismo , Preeclampsia/patología , Preeclampsia/genética , Proliferación Celular/genética

RESUMEN

Developing novel luminescent materials with ideal properties is an endless project, urged by growing requirements of advances in energy saving, healthy lighting and environmental friendliness. Herein, a series of ScCaOBO3:Ce3+,Mn2+ phosphors with excellent luminescence properties were synthesized by the high temperature solid state method. X-ray diffraction was applied to analyse the phase composition of the obtained phosphors. The morphology and dopant distribution were observed by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS), respectively. The Rietveld refinements and luminescence spectra indicate that Ce3+ preferentially occupies the Sc3+ site and produces a blue emission band at around 460 nm, which originates from the characteristic 5d-4f transitions, while Mn2+ preferentially occupies the Ca2+ site and emits red light due to its characteristic 4T1(4G)-6A1(6S) transitions. Upon excitation at 354 nm, both Ce3+ and Mn2+ emissions can be obtained and further investigations evidenced that the broad and intense light emission of Mn2+ located in the red spectral region is the result of energy transfer from Ce3+ to Mn2+. Theoretical calculations reveal that the energy transfer process from Ce3+ to Mn2+ is of the resonance type and is governed by electric dipole-dipole interactions. Since the ScCaOBO3:Ce3+,Mn2+ phosphors are capable of producing broadband emissions that widely cover the blue and red spectral regions, the introduction of a green light-emitting phosphor CMA:Tb3+ can conveniently generate high quality white light. Therefore, a white light-emitting diode device with extremely high color rendering indices, Ra = 93.7 and R9 = 91.9, was successfully obtained.

Asunto(s)

Luminiscencia , Manganeso , Transferencia de Energía , Manganeso/química , Rayos Ultravioleta , Difracción de Rayos X

RESUMEN

MicroRNAs (miRNAs) are small non-coding RNAs composed of 18-25 nucleotides that regulate the expression of approximately 30% of human protein coding genes. Dysregulation of miRNAs plays a pivotal role in the initiation and progression of malignancies. Our study has shown that microRNA-34a (miR-34a) was upregulated in human endometrial cancer stem cells (ECSCs). However, it is unknown how miR-34a regulates endometrial cancer itself. Here, we report that miR-34a directly and functionally targeted Notch1. MiR-34a inhibited the proliferation, migration, invasion, EMT-associated phenotypes by downregulating Notch1 in endometrial cancer cells. Overexpression of miR-34a also suppressed tumor growth in nude mice. Importantly, further results suggested miR-34a was significantly downregulated in endometrial cancer tissues and negatively correlated with Notch1 expression. There was a significant association between decreased miR-34a expression and worse patient prognosis. Taken together, our results suggest that miR-34a plays tumor-suppressive roles in endometrial cancer through downregulating Notch1. Thus miR-34a could be a potential therapeutic target for prevention and treatment of endometrial cancer.

RESUMEN

Ferroelectric resistive switching (RS), manifested as a switchable ferroelectric diode effect, was observed in well-ordered and high-density nanocapacitor arrays based on continuous BiFeO3 (BFO) ultrathin films and isolated Pt nanonelectrodes. The thickness of BFO films and the lateral dimension of Pt electrodes were aggressively scaled down to <10 nm and ∼60 nm, respectively, representing an ultrahigh ferroelectric memory density of ∼100 Gbit/inch(2). Moreover, the RS behavior in those nanocapacitors showed a large ON/OFF ratio (above 10(3)) and a long retention time of over 6,000 s. Our results not only demonstrate for the first time that the switchable ferroelectric diode effect could be realized in BFO films down to <10 nm in thickness, but also suggest the great potentials of those nanocapacitors for applications in high-density data storage.

RESUMEN

In this report, vertically free-standing lead zirconate titanate Pb(Zr0.52Ti0.48)O3 (PZT) nanocup arrays with good ordering and high density (1.3 × 10(10) cm(-2)) were demonstrated. By a template-assisted ion beam etching (IBE) strategy, the PZT formed in the pore-through anodic aluminum oxide (AAO) membrane on the Pt/Si substrate was with a cup-like nanostructure. The mean diameter and height of the PZT nanocups (NCs) was about 80 and 100 nm, respectively, and the wall thickness of NCs was about 20 nm with a hole depth of about 80 nm. Uppermost, the nanocup structure with low aspect ratio realized vertically free-standing arrays when losing the mechanical support from templates, avoiding the collapse or bundling when compared to the typical nanotube arrays. X-ray diffraction (XRD) and Raman spectrum revealed that the as-prepared PZT NCs were in a perovskite phase. By the vertical piezoresponse force microscopy (VPFM) measurements, the vertically free-standing ordered ferroelectric PZT NCs showed well-defined ring-like piezoresponse phase and hysteresis loops, which indicated that the high-density PZT nanocup arrays could have potential applications in ultra-high non-volatile ferroelectric memories (NV-FRAM) or other nanoelectronic devices.

RESUMEN

In this report, ordered lead zirconate titanate Pb(Zr0.52Ti0.48)O3 (PZT) nanodot arrays were fabricated by an original one-step mask etching route. The one-step mask etching strategy is based on the patterned nanostructure of barrier layer (BL) at the bottom of anodic aluminum oxide (AAO), by a direct transfer of the nanopattern from BL to the pre-deposited PZT film, without introduction of any sacrifice layer and lithography. Therefore, the presented strategy is relatively simple and economical. X-ray diffraction and Raman analysis revealed that the as-prepared PZT was in a perovskite phase. Atomic and piezoresponse force microscopy indicated that the PZT nanodot arrays were with both good ordering and well-defined ferroelectric properties. Considering its universality on diverse substrates, the present method is a general approach to the high-quality ordered ferroelectric nanodot arrays, which is promising for applications in ultra-high density nonvolatile ferroelectric random access memories (NV-FRAM).

RESUMEN

In this work, we demonstrate a silver catalyzed heteroepitaxial growth of gallium phosphide nanowires (GaP NWs) on silicon. The morphology and growth direction of GaP NWs on differently orientated Si substrates were investigated. From crystallographic analysis, we inferred that Ag from catalyst is incorporated into the GaP during the chemical beam epitaxy (CBE) process. Using the PL spectrum and time-resolved emission spectroscopy, the optical properties of Ag-catalyzed GaP NWs were greatly modified, with bandgap transitions in the blue range. The Raman characterizations further confirmed the Ag incorporation into GaP during the growth. From the bandgap calculations, it was deduced that Ag was substituted on the Ga site with bandgap broadening. The in situ Ag-alloying during the growth of Ag-catalyzed GaP NWs greatly modified the band structure of GaP, and could lead to further applications in optoelectronics for low-dimensional GaP-based nanomaterials.

RESUMEN

Ultrahigh density well-registered oxide nanocapacitors are very essential for large scale integrated microelectronic devices. We report the fabrication of well-ordered multiferroic BiFeO3 nanocapacitor arrays by a combination of pulsed laser deposition (PLD) method and anodic aluminum oxide (AAO) template method. The capacitor cells consist of BiFeO3/SrRuO3 (BFO/SRO) heterostructural nanodots on conductive Nb-doped SrTiO3 (Nb-STO) substrates with a lateral size of ~60 nm. These capacitors also show reversible polarization domain structures, and well-established piezoresponse hysteresis loops. Moreover, apparent current-rectification and resistive switching behaviors were identified in these nanocapacitor cells using conductive-AFM technique, which are attributed to the polarization modulated p-n junctions. These make it possible to utilize these nanocapacitors in high-density (>100 Gbit/inch(2)) nonvolatile memories and other oxide nanoelectronic devices.