RESUMEN
This study reports on the laboratory performance, field performance and cost analysis of fiber-reinforced asphalt concrete (FR-AC) pavement using AC60/70 and polymer modified asphalt (PMA) as binders. The performance testing included indirect tensile resilient modulus, indirect tensile strength modulus, indirect tensile fatigue life, dynamic creep and wheel-tracker tests. Field trials of AC60/70 and PMA mixtures, were undertaken with and without fibers and the International Roughness Index, texture depth, and rutting of the mixtures were measured over time. The PMA + Fiber mixture exhibited the best performance among the materials tested. The performance of AC60/70 + Fiber mixture were comparable to PMA mixture. The improvement of both fatigue cracking and rutting were similar for AC60/70 + Fiber mixtures while the improvement of fatigue cracking was higher than rutting for the PMA mixtures. Since the performance of FR-AC was similar for both laboratory and plant mixed specimens, the laboratory mix design results can be used to interpret the field performance. The fiber reinforced AC60/70 mixture was found to be the most economical. The outcome of this research can be used as a guide, for establishing the specification of FR-AC pavement in Thailand and other countries using similar mix design.
RESUMEN
In this research, a low-carbon stabilization method was studied using Recycled Asphalt Pavement (RAP) and Fly Ash (FA) geopolymers as a sustainable pavement material. The liquid alkaline activator (L) is a mixture of sodium silicate (Na2SiO3) and sodium hydroxide (NaOH), and high calcium FA is used as a precursor to synthesize the FA-RAP geopolymers. Unconfined Compressive Strength (UCS) of RAP-FA blend and RAP-FA geopolymer are investigated and compared with the requirement of the national road authorities of Thailand. The leachability of the heavy metals is measured by Toxicity Characteristic Leaching Procedure (TCLP) and compared with international standards. The Scanning Electron Microscopy (SEM) analysis of RAP-FA blend indicates the Calcium Aluminate (Silicate) Hydrate (C-A-S-H) formation, which is due to a reaction between the high calcium in RAP and high silica and alumina in FA. The low geopolymerization products (N-A-S-H) of RAP-FA geopolymer at NaOH/Na2SiO3=100:0 are detected at the early 7days of curing, hence its UCS is lower than that of RAP-FA blend. The 28-day UCS of RAP-FA geopolymers at various NaOH/Na2SiO3 ratios are significantly higher than that of the RAP-FA blend, which can be attributed to the development of geopolymerization reactions. With the input of Na2SiO3, the highly soluble silica from Na2SiO3 reacted with leached silica and alumina from FA and RAP and with free calcium from FA and RAP; hence the coexistence of N-A-S-H gel and C-A-S-H products. Therefore, the 7-day UCS values of RAP-FA geopolymers increase with decreasing NaOH/Na2SiO3 ratio. TCLP results demonstrated that there is no environmental risk for both RAP-FA blends and RAP-FA geopolymers in road construction. The geopolymer binder reduces the leaching of heavy metal in RAP-FA mixture. The outcomes from this research will promote the move toward increased applications of recycled materials in a sustainable manner in road construction.