RESUMEN

PURPOSE: The purpose of this study was to provide guidance on quality management for electronic brachytherapy. MATERIALS AND METHODS: The task group used the risk-assessment approach of Task Group 100 of the American Association of Physicists in Medicine. Because the quality management program for a device is intimately tied to the procedure in which it is used, the task group first designed quality interventions for intracavitary brachytherapy for both commercial electronic brachytherapy units in the setting of accelerated partial-breast irradiation. To demonstrate the methodology to extend an existing risk analysis for a different application, the task group modified the analysis for the case of post-hysterectomy, vaginal cuff irradiation for one of the devices. RESULTS: The analysis illustrated how the TG-100 methodology can lead to interventions to reduce risks and improve quality for each unit and procedure addressed. CONCLUSION: This report provides a model to guide facilities establishing a quality management program for electronic brachytherapy.

Asunto(s)

RESUMEN

Radiation therapy of the head and neck can result in mucositis and other acute affects in the oral cavity. This prospective pilot study evaluated a novel, intraoral, beam-blocking device for use during imaging and therapeutic procedures. The beam-blocking device was made from a metal alloy inserted into a coated frozen dessert mold (Popsicle® Mold, Cost Plus World Market, Oakland, CA). The device was designed so that it could be inserted into an outer shell, which in turn allowed it to be placed or removed depending on the need due to beam configuration. A Farmer type ionization chamber and virtual water phantom were used to assess effects of field size on transmission. Six large breed cadaver dogs, donated by the owner after death, were recruited for the study. Delivered dose at the dorsal and ventral surfaces of the device, with and without the alloy block in place, were measured using radiochromic film. It was determined that transmission was field size dependent with larger field sizes leading to decreased attenuation of the beam, likely secondary to scatter. The mean and median transmission on the ventral surface without the beam-blocking device was 0.94 [range 0.94-0.96]. The mean and median transmission with the beam-blocking device was 0.52 [range 0.50-0.57]. The mean and median increase in dose due to backscatter on the dorsal surface of the beam-blocking device was 0.04 [range 0.02-0.04]. Findings indicated that this novel device can help attenuate radiation dose ventral to the block in dogs, with minimal backscatter.

Asunto(s)

RESUMEN

OBJECTIVE: To optimize the use of CT-guided modeling for the calculation of body surface area (BSA) in domestic rabbits (Oryctolagus cuniculus). Animals-12 domestic rabbits. PROCEDURES: Adult rabbits (body weight, 1 to > 4 kg) that were client-owned animals undergoing CT for disease diagnosis or deceased laboratory animals donated from other research projects were scanned with a CT scanner. Images were transferred to a radiation therapy planning software program. Image slices were captured as contiguous slices at 100 kVp and 100 mA and processed to 0.1-cm-thick sections. The length of each contoured slice was summed to calculate a final BSA measurement. Nonlinear regression analysis was then used to derive an equation for the calculation of BSA in rabbits. RESULTS: The constant calculated by use of this method was 9.9 (range, 9.59 to 10). The R(2) for the goodness of fit was 0.9332. The equation that best described BSA as a function of body weight for domestic rabbits with this method was as follows: BSA = (9.9 × [body weight {in grams}](2/3))/10,000. CONCLUSIONS AND CLINICAL RELEVANCE: The BSA calculated via the CT-guided method yielded results similar to those obtained with equations for other similarly sized mammals and verified the use of such equations for rabbits. Additionally, this technique can be used for species that lack equations for the accurate calculation of BSA.

Asunto(s)

RESUMEN

PURPOSE: This multicenter, retrospective study evaluated treatment and clinical outcomes of patients with early stage breast cancer who received adjuvant high-dose rate (HDR) electronic brachytherapy (EBT) treatment post-lumpectomy using the Axxent(®) EBT system. Dosimetric data from the EBT treatment plans were compared with those based on iridium-192 HDR brachytherapy. MATERIAL AND METHODS: Medical records of 63 patients with early stage breast cancer (Tis, T1a, T1b, T1c, and T2) who were treated post-lumpectomy with EBT alone or in combination with external beam radiation therapy were reviewed. The prescribed EBT dose was 34 Gy (10 fractions over 5 days, 3.4 Gy each) to 1 cm from the balloon surface. Dosimetry data from 12 patients were compared with these of treatment plans using an iridium-192 source prepared for the same 12 patients. RESULTS: The majority of patients (90.5%) were older than 50 years and had one or more risk factors for breast cancer (80.6%). Tumor sizes were 0.1 cm to 3.5 cm (mean 1.3 cm). Median follow-up was 7 months (1 to 18 months) post-EBT. Balloon applicators were implanted 0 to 85 days (mean 13.4 days) post-lumpectomy/re-excision. The most common adverse events were erythema, rash dermatitis, and pain or breast tenderness. No recurrences were reported. Dosimetric analyses demonstrated comparable target coverage, increased high-dose regions, and a significantly reduced dose to the ipsilateral breast and lungs as well as the heart with EBT as compared with the iridium-192 treatment plans. CONCLUSION: This retrospective, multicenter study showed that postsurgical adjuvant radiation therapy for early stage breast cancer can be administered using the EBT system with similar toxicity outcomes to those reported with iridium-192 brachytherapy. EBT offers a convenient, portable, nonisotope alternative to HDR brachytherapy using iridium-192.

RESUMEN

The objective of this study has been to compare treatment plans for patients treated with electronic brachytherapy (eBx) using the Axxent System as adjuvant therapy for early stage breast cancer with treatment plans prepared from the same CT image sets using an Ir-192 source. Patients were implanted with an appropriately sized Axxent balloon applicator based on tumor cavity size and shape. A CT image of the implanted balloon was utilized for developing both eBx and Ir-192 brachytherapy treatment plans. The prescription dose was 3.4 Gy per fraction for 10 fractions to be delivered to 1 cm beyond the balloon surface. Iridium plans were provided by the sites on 35 of the 44 patients enrolled in the study. The planning target volume coverage was very similar when comparing sources for each patient as well as between patients. There were no statistical differences in mean %V100. The percent of the planning target volume in the high dose region was increased with eBx as compared with Iridium (p < 0.001). The mean maximum calculated skin and rib doses did not vary greatly between eBx and Iridium. By contrast, the doses to the ipsilateral lung and the heart were significantly lower with eBx as compared with Iridium (p < 0.0001). The total nominal dwell times required for treatment can be predicted by using a combination of the balloon fill volume and planned treatment volume (PTV). This dosimetric comparison of eBx and Iridium sources demonstrates that both forms of balloon-based brachytherapy provide comparable dose to the planning target volume. Electronic brachytherapy is significantly associated with increased dose at the surface of the balloon and decreased dose outside the PTV, resulting in significantly increased tissue sparing in the heart and ipsilateral lung.

Asunto(s)

Asunto(s)

Asunto(s)