RESUMEN
A low-cost novel spectral camera able to be used for near infrared spectroscopy was made by using a Jetson Nano to synchronize a Sony IMX219 NOIR autofocus image sensor, an AMS AS7265x 18-channel spectral sensor and Osram SFH 4737 broadband infrared LED's. Synchronizing an image sensor and spectral sensor augments a standard RGB image with light spectrum information; capturing the light distribution information normally lost in RGB image capture. Sutherland et al. [1] used this novel spectral camera to examine the dorsal surface of juvenile lobsters as a possible pre-moult detector. Having the image and spectrum in combination allowed the incomplete and unmineralized post-moult dorsal surface to be characterized with 86.7% accuracy for the first time. A proposed application for the spectral camera is to omit the local SFH 4737 light source and use the camera in daylight, effectively making a low-cost substitute hyperspectral snapshot camera. In this configuration the camera may have application for low-cost drone deployment for small scale agriculture.
RESUMEN
Optical detection is the most common detection mode for many analytical assays. Photometric detection systems and their integration with analytical systems usually require several assembly parts and manual alignment of the capillary/tubing which affects sensitivity and repeatability. 3D printing is an innovative technology for the fabrication of integrated complex detection systems. One step multi-material 3D printing has been explored to fabricate a photometric detector flow cell from optically transparent and opaque materials using a dual-head FDM 3D printer. Integration of the microchannel, the detection window and the slit in a single device eliminates the need for manual alignment of fluidic and optical components, and hence improves sensitivity and repeatability. 3D printing allowed for rapid design optimisation by varying the slit dimension and optical pathlength. The optimised design was evaluated by determining stray light, effective path length and the signal to noise ratio using orange G. The optimised flow cell with extended path length of 10â¯mm and 500⯵m slit yielded 0.02% stray light, 89% effective path length and detection limit of 2â¯nM. The sensitivity was also improved by 80% in the process of optimisation, using a blue 470â¯nm LED as a light source.