RESUMEN
The purpose of this article is to evaluate the dislocations that occurred in a single surgeon practice over a 26 year period. After extensive research, the authors concluded that dislocation continues to occur long after the initial arthroplasty procedure. Patients should be aware that more than a quarter of dislocations occur 2 years following surgery. Use of modular 22 millimeter components were associated with the highest dislocation rate. These components should be used very cautiously. Constrained liners have helped decrease the dislocation rate following revision for dislocation.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Luxación de la Cadera/etiología , Complicaciones Posoperatorias , Anciano , Humanos , Recurrencia , Reoperación , Estudios Retrospectivos , Factores de TiempoRESUMEN
Regarding dislocation after total hip arthroplasty, prevention is worth an ounce of cure. The current authors evaluated dislocation after total hip arthroplasty during the 26-year practice of one surgeon to identify potential variables that can contribute to the prevention of dislocation. Between 1970 and 1996, dislocation after total hip replacement occurred after 7.2% of primary hip arthroplasty procedures (298 of 4164 primary hip replacements) and 11.2% of revision hip arthroplasty procedures (90 of 803 revision hip replacements). Significant findings included an increase in dislocation when 22-mm modular femoral heads were used and a decrease in dislocation after revision for dislocation when constrained liners were used. An additional finding was that 26% of first time dislocations occurred more than 2 years after surgery. Concerning prevention of dislocation, small head modular femoral components should be used cautiously, and constrained liners should be considered in complex revision cases. Patients should be counseled concerning the potential for dislocation many years after their arthroplasty.