RESUMEN

Using scanning tunneling microscopy and spectroscopy we demonstrate a revival of magnetism in 7-armchair nanoribbon by unpassivated atoms at the termini. Namely, a pair of intense Kondo resonances emerges at the peripheries of zigzag terminus revealing the many-body screening effects of local magnetic moments. Although Kondo resonance originates from a missing local orbital, it extends to a distance of 2.5 nm along the edge of the ribbon. The results are complemented by density functional theory calculations which suggest a possible coupling between Kondo states despite screening effects of substrate electrons. These findings indicate a possibility to restore intrinsic magnetic ordering in graphene nanoribbon without major structural modifications.

RESUMEN

Current interest in investigating non-precious group (NPG) metals for catalyzing the oxygen evolution reaction (OER) has revealed that doping of Ni hydroxides with Fe results in the dramatic enhancement of catalytic activity. Herein, a facile pathway to construct tetrataenite, an NiFe alloy of extraterrestrial origin and to address the limited electrical conductivity of metal oxides/hydroxides by directly constructing them atop graphene sheets is described. In this approach, a one-pot, bottom-up assembly of hybrid ultramicroporous materials (HUMs) was carried out, in the presence of suspended graphene (G), to homogeneously deposit the HUMs on unmodified graphene sheets, affording HUMs@G. Single metal (SIFSIX-3-Ni@G) and mixed metal (SIFSIX-3-NiFe@G) HUMs can be readily synthesized from their respective metal salts to afford a well-designed catalyst for the OER. The pyrolysis of SIFSIX-3-NiFe@G resulted in the deposition of the nanoalloy tetrataenite on G, demonstrating an exceptionally low OER onset potential of 1.44 V vs. RHE and reduced overpotential at 10 mA cm-2 (η10 = 266 mV). The synergy between the composition of the active catalyst and the electronically conductive support was attained by designing a reaction system encoding the self-assembly of a crystalline pre-catalyst on G sheets.

RESUMEN

Memristive devices are highly promising for implementing neuromorphic functionalities in future electronic hardware, and direct insights into memristive phenomena on the nanoscale are of fundamental importance to reaching this. Conductive atomic force microscopy (cAFM) has proven to be an essential tool for probing memristive action locally on the nanoscale, but the significance of the acquired data frequently suffers from the nonlocality associated with the thermal drift of the tip in ambient conditions. Furthermore, comparative studies of different configurations of filamentary devices have proven to be difficult, because of an immanent variability of the filament properties between different devices. Herein, these problems are addressed by constraining the memristive action directly at the apex of the probe through functionalization of a cAFM tip with an archetypical memristive stack, which is comprised of Ag/Si3N4. The design of such functionalized cantilevers (entitled here as "memtips") allowed the capture of the long-term intrinsic current response, identifying temporal correlations between switching events, and observing emerging spiking dynamics directly at the nanoscale. Utilization of an identical memtip for measurements on different counter electrodes made it possible to directly compare the impact of different device configurations on the switching behavior of the same filament. Such an analytical approach in ambient conditions will pave the way towards a deeper understanding of filamentary switching phenomena on the nanoscale.

RESUMEN

Nanoscale memristive phenomena are of great interest not only to miniaturize devices and improve their performance but also to understand the details of the underlying mechanism. Herein, we utilize conductive atomic force microscopy (C-AFM) as a non-invasive method to examine the nanoscale memristive properties of individual noble metal alloy nanoparticles that are sparsely encapsulated in a thin SiO2 dielectric matrix. The measurement of current-voltage hysteresis loops at the level of individual nanoparticles, enabled by the nanoscopic contact area of the C-AFM tip, indicates reliable memristive switching for several hours of continuous operations. Alongside the electrical characterization on the nanoscale, the method of C-AFM offers the potential for in situ monitoring of long term operation induced morphological alterations and device failure, which is demonstrated at the example of nanoparticle-based devices with additional Cr wetting layer. The application of alloy nanoparticles as reservoir for mobile silver species effectively limits the formation of stable metallic filaments and results in reproducible diffusive switching characteristics. Notably, similar behaviour is encountered on macroscopic nanocomposite devices, which incorporate multiple stacks of nanoparticles and offer a high design versatility to tune switching properties and engineer scalable memristive devices with diffusive switching characteristics. No additional forming step is required for the operation of the presented alloy nanoparticle based memristive devices, which renders them very attractive for applications.

RESUMEN

A novel approach to construct a highly active and durable Ni(OH)2 nanoparticle/graphene hybrid electrocatalyst for the oxygen-evolution reaction (OER) is reported. This approach utilized the Ni-loaded, graphene-supported, Zr-carboxylate metal-organic framework (UiO-66-NH2-Ni@G) as a sacrificial pre-catalyst to engender the true catalyst in an electrochemical surface restructuring process. This has resulted in an exceptionally active (η10 = 0.38 V vs. RHE) and highly durable OER catalyst, and can potentially be employed as a viable facile alternative to the commonly utilized pyrolysis of MOFs, to access heterogenous catalysts for demanding electrochemically-promoted reactions.

RESUMEN

We introduce a simple approach to fabricate an aligned carbon nanotube (ACNT) device for broadband polarization control in fiber laser systems. The ACNT device was fabricated by pulling from as-fabricated vertically-aligned carbon nanotube arrays. Their anisotropic properties are confirmed with various microscopy techniques. The device was then integrated into fiber laser systems (at two technologically important wavelengths of 1 and 1.5 µm) for polarization control. We obtained a linearly-polarized light output with the maximum extinction ratio of ∼12 dB. The output polarization direction could be fully controlled by the ACNT alignment direction in both lasers. To the best of our knowledge, this is the first time that the ACNT device is applied to polarization control in laser systems. Our results exhibit that the ACNT device is a simple, low-cost, and broadband polarizer to control laser polarization dynamics, for various photonic applications (such as material processing, polarization diversity detection in communications etc.), where linear polarization control is necessary.

RESUMEN

Annealing of C60 in hydrogen at temperatures above the stability limit of C-H bonds in C60H x (500-550 °C) is found to result in direct collapse of the cage structure, evaporation of light hydrocarbons, and formation of solid mixture composed of larger hydrocarbons and few-layered graphene sheets. Only a minor part of this mixture is soluble; this was analyzed using matrix-assisted laser desorption/ionization MS, Fourier transform infrared (FTIR), and nuclear magnetic resonance spectroscopy and found to be a rather complex mixture of hydrocarbon molecules composed of at least tens of different compounds. The sequence of most abundant peaks observed in MS, which corresponds to C2H2 mass difference, suggests a stepwise breakup of the fullerene cage into progressively smaller molecular fragments edge-terminated by hydrogen. A simple model of hydrogen-driven C60 unzipping is proposed to explain the observed sequence of fragmentation products. The insoluble part of the product mixture consists of large planar polycyclic aromatic hydrocarbons, as evidenced by FTIR and Raman spectroscopy, and some larger sheets composed of few-layered graphene, as observed by transmission electron microscopy. Hydrogen annealing of C60 thin films showed a thickness-dependent results with reaction products significantly different for the thinnest films compared to bulk powders. Hydrogen annealing of C60 films with the thickness below 10 nm was found to result in formation of nanosized islands with Raman spectra very similar to the spectra of coronene oligomers and conductivity typical for graphene.

RESUMEN

We describe a straightforward technique to synthesize pure Mo nanowires (NWs) from Mo6SyIz (8,2 15 nm) Mo NWs are highly porous, while small diameters (<7 nm) are made of solid nanocrystalline grains. We find NW of diameter 4 nm can carry up to 30 µA current without suffering structural degradation. Moreover, NWs can be elastically deformed over several cycles without signs of plastic deformation.

RESUMEN

Low-frequency dielectric polarization of single-walled carbon nanotubes (SWNTs) not only affects charge carrier transport in SWNT-based nanoelectronic devices but also determines their interaction with molecules, other nanomaterials, and external fields. Differential dielectric responses of metallic and semiconducting SWNTs are critical in electronic-type sorting of SWNTs. Here, we describe the measurement of low-frequency dielectric polarization of individual SWNTs without making electrical contacts to the nanotubes. Qualitative contrast is observed between metallic and semiconducting SWNTs due to drastically different longitudinal polarizabilities. This is developed into a facile assay for metallic and semiconducting contents in SWNT samples.

Asunto(s)

RESUMEN

Both fullerenes and single-walled carbon nanotubes (SWNTs) exhibit many advantageous properties. Despite the similarities between these two forms of carbon, there have been very few attempts to physically merge them. We have discovered a novel hybrid material that combines fullerenes and SWNTs into a single structure in which the fullerenes are covalently bonded to the outer surface of the SWNTs. These fullerene-functionalized SWNTs, which we have termed NanoBuds, were selectively synthesized in two different one-step continuous methods, during which fullerenes were formed on iron-catalyst particles together with SWNTs during CO disproportionation. The field-emission characteristics of NanoBuds suggest that they may possess advantageous properties compared with single-walled nanotubes or fullerenes alone, or in their non-bonded configurations.

Asunto(s)