RESUMEN
Enzyme-responsive polymeric micelles have great potential as drug delivery systems due to the high selectivity and overexpression of disease-associated enzymes, which could be utilized to trigger the release of active drugs only at the target site. We previously demonstrated that enzymatic degradation rates of amphiphilic PEG-dendron hybrids could be precisely tuned by gradually increasing the hydrophobic to hydrophilic ratio. However, with the increase in hydrophobicity, the micelles rapidly became too stable and could not be degraded, as often encountered for many other amphiphilic assemblies. Here we address the challenge to balance between stability and reactivity of enzymatically degradable assemblies by utilizing reversible dimerization of diblock polymeric amphiphiles to yield jemini amphiphiles. This molecular transformation serves as a tool to control the critical micelle concentration of the amphiphiles in order to tune their micellar stability and enzymatic degradability. To demonstrate this approach, we show that simple dimerization of two polymeric amphiphiles through a single reversible disulfide bond significantly increased the stability of their micellar assemblies toward enzymatic degradation, although the hydrophilic to hydrophobic ratio was not changed. Reduction of the disulfide bond led to dedimerization of the polymeric hybrids and allowed their degradation by the activating enzyme. The generality of the approach is demonstrated by designing both esterase- and amidase-responsive micellar systems. This new molecular design can serve as a simple tool to increase the stability of polymeric micelles without impairing their enzymatic degradability.
Asunto(s)
Biocatálisis , Micelas , Tensoactivos/química , Dendrímeros/química , Dimerización , Disulfuros/química , Polietilenglicoles/químicaRESUMEN
Self-assembled nanostructures and their stimuli-responsive degradation have been recently explored to meet the increasing need for advanced biocompatible and biodegradable materials for various biomedical applications. Incorporation of enzymes as triggers that can stimulate the degradation and disassembly of polymeric assemblies may be highly advantageous owing to their high selectivity and natural abundance in all living organisms. One of the key factors to consider when designing enzyme-responsive polymers is the ability to fine-tune the sensitivity of the platform toward its target enzyme in order to control the disassembly rate. In this work, a series of enzyme-responsive amphiphilic PEG-dendron hybrids with increasing number of hydrophobic cleavable end-groups was synthesized, characterized, and compared. These hybrids were shown to self-assemble in aqueous media into nanosized polymeric micelles, which could encapsulate small hydrophobic guests in their cores and release them upon enzymatic stimulus. Utilization of dendritic scaffolds as the responsive blocks granted ultimate control over the number of enzymatically cleavable end-groups. Remarkably, as we increased the number of end-groups, the micellar stability increased significantly and the range of enzymatic sensitivity spanned from highly responsive micelles to practically nondegradable ones. The reported results highlight the remarkable role of hydrophobicity in determining the micellar stability toward enzymatic degradation and its great sensitivity to small structural changes of the hydrophobic block, which govern the accessibility of the cleavable hydrophobic groups to the activating enzyme.
Asunto(s)
Enzimas/química , Micelas , Polímeros/química , Interacciones Hidrofóbicas e Hidrofílicas , Espectroscopía de Resonancia Magnética , Nanoestructuras , Polietilenglicoles/química , Polímeros/síntesis químicaRESUMEN
Studying the enzymatic degradation of synthetic polymers is crucial for the design of suitable materials for biomedical applications ranging from advanced drug delivery systems to tissue engineering. One of the key parameters that governs enzymatic activity is the limited accessibility of the enzyme to its substrates that may be collapsed inside hydrophobic domains. PEG-dendron amphiphiles can serve as powerful tools for the study of enzymatic hydrolysis of polymeric amphiphiles due to the monodispersity and symmetry of the hydrophobic dendritic block, which significantly simplifies kinetic analyses. Using these hybrids, we demonstrate how precise, minor changes in the hydrophobic block are manifested into tremendous changes in the stability of the assembled micelles toward enzymatic degradation. The obtained results emphasize the extreme sensitivity of self-assembly and its great importance in regulating the accessibility of enzymes to their substrates. Furthermore, the demonstration that the structural differences between readily degradable and undegradable micelles are rather minor, points to the critical roles that self-assembly and polydispersity play in designing biodegradable materials.
Asunto(s)
Enzimas , Micelas , Modelos Biológicos , Polímeros/química , Sistemas de Liberación de Medicamentos , Enzimas/química , Enzimas/metabolismo , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
The design of stable polymeric micelles that can respond to specific stimuli is crucial for the development of smart micellar nanocarriers that can release their active cargo selectively at the target site, thus diminishing the therapeutic limitations due to non-selective damage to healthy tissues. Here we report the design and synthesis of photo- and enzyme-responsive amphiphilic PEG-dendron hybrids bearing one, two or four enzymatically cleavable azobenzene end-groups. These dual-responsive hybrids can respond to light through the reversible isomerization of the azobenzene end-groups from the non-polar trans isomer to the highly polar cis isomer and vice versa, upon UV and visible irradiation, respectively. The high structural precision of these hybrids, which emerges from the dendritic architecture, enabled a detailed study of the photoisomerization of the azobenzene end-groups with high molecular resolution. Remarkably, although the transition from trans-to-cis led to a significant increase in the polarity of the micellar cores, the micelles remained stable. Our kinetic studies show that although the trans isomer is a better substrate for the activating enzyme, the UV induced formation of the cis azobenzene end-groups led to significant acceleration of the enzymatic hydrolysis of the end-groups. These results provide strong indication that the enzyme cannot reach the core of the micelles and instead the end-groups have to leave the hydrophobic core in order to be exposed on the micelle's surface or even leave the micelle in order to allow their cleavage by the activating enzymes.
Asunto(s)
Compuestos Azo/química , Enzimas/metabolismo , Procesos Fotoquímicos , Polietilenglicoles/química , Dendrímeros/química , Hidrólisis , Interacciones Hidrofóbicas e Hidrofílicas , Micelas , Modelos Moleculares , Conformación Molecular , EstereoisomerismoRESUMEN
The need for advanced fluorescent imaging and delivery platforms has motivated the development of smart probes that change their fluorescence in response to external stimuli. Here a new molecular design of fluorescently labeled PEG-dendron hybrids that self-assemble into enzyme-responsive micelles with tunable fluorescent responses is reported. In the assembled state, the fluorescence of the dyes is quenched or shifted due to intermolecular interactions. Upon enzymatic cleavage of the hydrophobic end-groups, the labeled polymeric hybrids become hydrophilic, and the micelles disassemble. This supramolecular change is translated into a spectral response as the dye-dye interactions are eliminated and the intrinsic fluorescence is regained. We demonstrate the utilization of this molecular design to generate both Turn-On and spectral shift responses by adjusting the type of the labeling dye. This approach enables transformation of non-responsive labeling dyes into smart fluorescent probes.
Asunto(s)
Dendrímeros/química , Portadores de Fármacos/química , Esterasas/química , Esterasas/metabolismo , Colorantes Fluorescentes/química , Nanopartículas/química , Polietilenglicoles/química , Interacciones Hidrofóbicas e Hidrofílicas , Micelas , Polímeros/químicaRESUMEN
The high selectivity and often-observed overexpression of specific disease-associated enzymes make them extremely attractive for triggering the release of hydrophobic drug or probe molecules from stimuli-responsive micellar nanocarriers. Here we utilized highly modular amphiphilic polymeric hybrids, composed of a linear hydrophilic polyethylene glycol (PEG) and an esterase-responsive hydrophobic dendron, to prepare and study two diverse strategies for loading of enzyme-responsive micelles. In the first type of micelles, hydrophobic coumarin-derived dyes were encapsulated noncovalently inside the hydrophobic core of the micelle, which was composed of lipophilic enzyme-responsive dendrons. In the second type of micellar nanocarrier the hydrophobic molecular cargo was covalently linked to the end-groups of the dendron through enzyme-cleavable bonds. These amphiphilic hybrids self-assembled into micellar nanocarriers with their cargo covalently encapsulated within the hydrophobic core. Both types of micelles were highly responsive toward the activating enzyme and released their molecular cargo upon enzymatic stimulus. Importantly, while faster release was observed with noncovalent encapsulation, higher loading capacity and slower release rate were achieved with covalent encapsulation. Our results clearly indicate the great potential of enzyme-responsive micellar delivery platforms due to the ability to tune their payload capacities and release rates by adjusting the loading strategy.
Asunto(s)
Química Farmacéutica , Portadores de Fármacos , Enzimas/metabolismo , Micelas , Microscopía Electrónica de Transmisión , Espectrometría de FluorescenciaRESUMEN
Enzyme-responsive micelles have great potential as drug delivery platforms due to the high selectivity of the activating enzymes. Here we report a highly modular design for the efficient and simple synthesis of amphiphilic block copolymers based on a linear hydrophilic polyethyleneglycol (PEG) and an enzyme-responsive hydrophobic dendron. These amphiphilic hybrids self-assemble in water into micellar nanocontainers that can disassemble and release encapsulated molecular cargo upon enzymatic activation. The utilization of monodisperse dendrons as the stimuli-responsive block enabled a detailed kinetic study of the molecular mechanism of the enzymatically triggered disassembly. The modularity of these PEG-dendron hybrids allows control over the disassembly rate of the formed micelles by simply tuning the PEG length. Such smart amphiphilic hybrids could potentially be applied for the fabrication of nanocarriers with adjustable release rates for delivery applications.