RESUMEN

Within mean-field theory we calculate universal scaling functions associated with critical Casimir forces for a system consisting of three parallel cylindrical colloids immersed in a near-critical binary liquid mixture. For several geometrical arrangements and boundary conditions at the surfaces of the colloids we study the force between two colloidal particles in the direction normal to their axes, analyzing the influence of the presence of a third particle on that force. Upon changing temperature or the relative positions of the particles we observe interesting features such as a change of sign of this force caused by the presence of the third particle. We determine the three-body component of the forces acting on one of the colloids by subtracting the pairwise forces from the total force. The three-body contribution to the total critical Casimir force turns out to be more pronounced for small surface-to-surface distances between the colloids as well as for temperatures close to criticality. Moreover, we compare our results with similar ones for other physical systems such as three atoms interacting via van der Waals forces.

RESUMEN

We study critical Casimir forces between planar walls and geometrically structured substrates within mean-field theory. As substrate structures, crenellated surfaces consisting of periodic arrays of rectangular crenels and merlons are considered. Within the widely used proximity force approximation, both the top surfaces of the merlons and the bottom surfaces of the crenels contribute to the critical Casimir force. However, for such systems the full, numerically determined critical Casimir forces deviate significantly from the pairwise addition formalism underlying the proximity force approximation. A first-order correction to the proximity force approximation is presented in terms of a step contribution arising from the critical Casimir interaction between a planar substrate and the right-angled steps of the merlons consisting of their upper and lower edges as well as their sidewalls.

RESUMEN

Within mean-field theory we determine the universal scaling function for the effective force acting on a single colloid located near the interface between two coexisting liquid phases of a binary liquid mixture close to its critical consolute point. This is the first study of critical Casimir forces emerging from the confinement of a fluctuating medium by at least one shape responsive, soft interface, instead of by rigid walls only as studied previously. For this specific system, our semi-analytical calculation illustrates that knowledge of the colloid-induced, deformed shape of the interface allows one to accurately describe the effective interaction potential between the colloid and the interface. Moreover, our analysis demonstrates that the critical Casimir force involving a deformable interface is accurately described by a universal scaling function, the shape of which differs from that one for rigid walls.

RESUMEN

Recent experiments have demonstrated a fluctuation-induced lateral trapping of spherical colloidal particles immersed in a binary liquid mixture near its critical demixing point and exposed to chemically patterned substrates. Inspired by these experiments, we study this kind of effective interaction, known as the critical Casimir effect, for elongated colloids of cylindrical shape. This adds orientational degrees of freedom. When the colloidal particles are close to a chemically structured substrate, a critical Casimir torque acting on the colloids emerges. We calculate this torque on the basis of the Derjaguin approximation. The range of validity of the latter is assessed via mean-field theory. This assessment shows that the Derjaguin approximation is reliable in experimentally relevant regimes, so that we extend it to Janus particles endowed with opposing adsorption preferences. Our analysis indicates that critical Casimir interactions are capable of achieving well-defined, reversible alignments both of chemically homogeneous and of Janus cylinders.

RESUMEN

Within mean-field theory we calculate the scaling functions associated with critical Casimir forces for a system consisting of two spherical colloids immersed in a binary liquid mixture near its consolute point and facing a planar, homogeneous substrate. For several geometrical arrangements and boundary conditions we analyze the normal and the lateral critical Casimir forces acting on one of the two colloids. We find interesting features such as a change of sign of these forces upon varying either the position of one of the colloids or the temperature. By subtracting the pairwise forces from the total force we are able to determine the many-body forces acting on one of the colloids. We have found that the many-body contribution to the total critical Casimir force is more pronounced for small colloid-colloid and colloid-substrate distances, as well as for temperatures close to criticality, where the many-body contribution to the total force can reach up to 25%.

RESUMEN

Colloids immersed in a critical or near-critical binary liquid mixture and close to a chemically patterned substrate are subject to normal and lateral critical Casimir forces of dominating strength. For a single colloid, we calculate these attractive or repulsive forces and the corresponding critical Casimir potentials within mean-field theory. Within this approach we also discuss the quality of the Derjaguin approximation and apply it to Monte Carlo simulation data available for the system under study. We find that the range of validity of the Derjaguin approximation is rather large and that it fails only for surface structures which are very small compared to the geometric mean of the size of the colloid and its distance from the substrate. For certain chemical structures of the substrate, the critical Casimir force acting on the colloid can change sign as a function of the distance between the particle and the substrate; this provides a mechanism for stable levitation at a certain distance which can be strongly tuned by temperature, i.e., with a sensitivity of more than 200 nm/K.

RESUMEN

Based on renormalization group concepts and explicit mean field calculations, we study the universal contribution to the effective force and torque acting on an ellipsoidal colloidal particle, which is dissolved in a critical fluid and is close to a homogeneous planar substrate. At the same closest distance between the substrate and the surface of the particle, the ellipsoidal particle prefers an orientation parallel to the substrate, and the magnitude of the fluctuation-induced force is larger than if the orientation of the particle is perpendicular to the substrate. The sign of the critical torque acting on the ellipsoidal particle depends on the type of boundary conditions for the order parameter at the particle and substrate surfaces and on the pivot with respect to which the particle rotates.

RESUMEN

We study the influence of mutual interaction on the conformation of flexible poly(propyleneamine) dendrimers of fourth generation in concentrated solution. Mixtures of dendrimers with protonated and deuterated end groups are investigated by small-angle neutron scattering up to volume fractions of 0.23. This value is in the range of the overlap concentration of the dendrimers. The contrast between the solute and the solvent was varied by using mixtures of protonated and deuterated solvents. This allows us to investigate the partial structure factors of the deuterated dendrimers in detail. An analysis of the measured scattering intensities reveals that the shape of the flexible dendrimers is practically independent of the concentration in contrast to the pronounced conformational changes in flexible linear polymers.

RESUMEN

We study the behavior of fluids, confined by geometrically structured substrates, upon approaching a critical point at T=T(c) in their bulk phase diagram. As generic substrate structures periodic arrays of wedges and ridges are considered. Based on general renormalization group arguments we calculate, within mean field approximation, the universal scaling functions for order parameter profiles of a fluid close to a single structured substrate and discuss the decay of its spatial variation into the bulk. We compare the excess adsorption at corrugated substrates to the one at planar walls. The confinement of a critical fluid by two walls generates effective critical Casimir forces between them. We calculate corresponding universal scaling functions for the normal critical Casimir force between a flat and a geometrically structured substrate as well as the lateral critical Casimir force between two identically patterned substrates.

RESUMEN

We report on the unexpected finding of nanoscale fibers with a diameter down to 25 nm that emerge from a polymer solution during a standard spin-coating process. The fiber formation relies upon the Raleigh-Taylor instability of the spin-coated liquid film that arises due to a competition of the centrifugal force and the Laplace force induced by the surface curvature. This procedure offers an attractive alternative to electrospinning for the efficient, simple, and nozzle-free fabrication of nanoscale fibers from a variety of polymer solutions.

RESUMEN

The "polymer reference interaction site model" (PRISM) integral equation theory is used to determine the structure factor of rigid dendrimers in solution. The theory is quite successful in reproducing experimental structure factors for various dendrimer concentrations. In addition, the structure factor at vanishing scattering vector is calculated via the compressibility equation using scaled particle theory and fundamental measure theory. The results as predicted by both theories are systematically smaller than the experimental and PRISM data for platelike dendrimers.

RESUMEN

We present a complete analysis of the structure of polyethylene (PE) nanoparticles synthesized and stabilized in water under very mild conditions (15 degrees C, 40 atm) by a nickel-catalyzed polymerization in aqueous solution. Combining cryogenic transmission electron microscopy (cryo-TEM) with X-ray scattering, we demonstrate that this new synthetic route leads to a stable dispersion of individual PE nanoparticles with a narrow size distribution. Most of the semicrystalline particles have a hexagonal shape (lateral size 25 nm, thickness 9 nm) and exhibit the habit of a truncated lozenge. The combination of cryo-TEM and small-angle X-ray scattering demonstrates that the particles consist of a single crystalline lamella sandwiched between two thin amorphous polymer layers ("nanohamburgers"). Hence, these nanocrystals that comprise only ca. 14 chains present the smallest single crystals of PE ever reported. The very small thickness of the crystalline lamella (6.3 nm) is related to the extreme undercooling (more than 100 degrees C) that is due to the low temperature at which the polymerization takes place. This strong undercooling cannot be achieved by any other method so far. Dispersions of polyethylene nanocrystals may have a high potential for a further understanding of polymer crystallization as well as for materials science as, e.g., for the fabrication of extremely thin crystalline layers.

Asunto(s)

RESUMEN

We consider a nonspherical colloidal particle immersed in a fluid close to its critical point. The temperature dependence of the corresponding order parameter profile is calculated explicitly. We perform a systematic expansion of the order parameter profile in powers of the local curvatures of the surface of the colloidal particle. This curvature expansion reduces to the short distance expansion of the order parameter profile in the case that the solvent is at the critical composition.

RESUMEN

We study bottle-brush macromolecules in a good solvent by small-angle neutron scattering (SANS), static light scattering (SLS), and dynamic light scattering (DLS). These polymers consist of a linear backbone to which long side chains are chemically grafted. The backbone contains about 1600 monomer units (weight average) and every second monomer unit carries side chains with approximately 60 monomer units. The SLS and SANS data extrapolated to infinite dilution lead to the form factor of the polymer that can be described in terms of a wormlike chain with a contour length of 380 nm and a persistence length of 17.5 nm. An analysis of the DLS data confirms these model parameters. The scattering intensities taken at finite concentration can be modeled using the polymer reference interaction site model. It reveals a softening of the bottle-brush polymers caused by their mutual interaction. We demonstrate that the persistence decreases from 17.5 nm down to 5 nm upon increasing the concentration from dilute solution to the highest concentration (40.59 gl) under consideration. The observed softening of the chains is comparable to the theoretically predicted decrease of the electrostatic persistence length of linear polyelectrolyte chains at finite concentrations.

RESUMEN

We study the phase behavior of a nematic liquid crystal confined between a flat substrate with strong anchoring and a patterned substrate whose structure and local anchoring strength we vary. By first evaluating an effective surface free-energy function characterizing the patterned substrate, we derive an expression for the effective free energy of the confined nematic liquid crystal. Then we determine phase diagrams involving a homogeneous state in which the nematic director is almost uniform and a hybrid aligned nematic state in which the orientation of the director varies through the cell. Direct minimizations of the free-energy functional were performed in order to test the predictions of the effective free-energy method. We find remarkably good agreement between the phase boundaries calculated from the two approaches. In addition, the effective free-energy method allows one to determine the energy barriers between two states in a bistable nematic device.

RESUMEN

We study dilute aqueous solutions of charged disklike mineral particles (laponite) by a combination of static light scattering (SLS) and small-angle x-ray scattering (SAXS). Laponite solutions are known to form gels above a certain critical concentration that must be described as nonequilibrium states. Here we focus on the investigation by SLS and SAXS at concentrations below gelation (c<0.016 g/L) and at low concentrations of added salt (0.001M and 0.005M). Thus, we have obtained the scattering function of single Laponite platelets as well as the structure factor describing their interaction at finite concentration. A detailed analysis of the combined sets of data proves that the solutions are in a well-defined equilibrium state. Moreover, this analysis demonstrates the internal consistency and accuracy of the scattering functions obtained at finite concentrations. We find that laponite particles interact through an effective pair potential that is attractive on short range but repulsive on longer range. This finding demonstrates that Laponite solutions exhibit only a limited stability at the concentration of added salt used herein. Raising the ionic strength to 0.005M already leads to slow flocculation as is evidenced from the enhanced scattering intensity at smallest scattering angles. All data strongly suggest that the gelation occurring at higher concentration is related to aggregation.

RESUMEN

A nematic liquid crystal in contact with a grating surface possessing an alternating stripe pattern of locally homeotropic and planar anchoring is studied within the Frank-Oseen model. The combination of both chemical and geometrical surface pattern leads to rich phase diagrams, involving a homeotropic, a planar, and a tilted nematic texture. The effect of the groove depth and the anchoring strengths on the location and the order of phase transitions between different nematic textures is studied. A zenithally bistable nematic device is investigated by confining a nematic liquid crystal between the patterned grating surface and a flat substrate with strong homeotropic anchoring.

RESUMEN

Density functional theory is used to study binary colloidal fluids consisting of hard spheres and thin platelets in their bulk and near a planar hard wall. This system exhibits liquid-liquid coexistence of a phase that is rich in spheres (poor in platelets) and a phase that is poor in spheres (rich in platelets). For the mixture near a planar hard wall, we find that the phase rich in spheres wets the wall completely upon approaching the liquid demixing binodal from the sphere-poor phase, provided the concentration of the platelets is smaller than a threshold value which marks a first-order wetting transition at coexistence. No layering transitions are found, in contrast to recent studies on binary mixtures of spheres and nonadsorbing polymers or thin hard rods.

RESUMEN

Density functional theory is used to study colloidal hard-rod fluids near an individual right-angled wedge or edge as well as near a hard wall, which is periodically patterned with rectangular barriers. The Zwanzig model, in which the orientations of the rods are restricted to three orthogonal orientations but their positions can vary continuously, is analyzed by numerical minimization of the grand potential. Density and orientational order profiles, excess adsorptions, as well as surface and line tensions are determined. The calculations exhibit an enrichment [depletion] of rods lying parallel and close to the corner of the wedge (edge). For the fluid near the geometrically patterned wall, complete wetting of the wall-isotropic liquid interface by a nematic film occurs as a two-stage process in which first the nematic phase fills the space between the barriers until an almost planar isotropic-nematic liquid interface has formed separating the higher-density nematic fluid in the space between the barriers from the lower-density isotropic bulk fluid. In the second stage, a nematic film of diverging film thickness develops upon approaching bulk-isotropic-nematic coexistence.

RESUMEN

The depletion potential between two hard spheres in a solvent of thin hard disclike platelets is investigated by using either the Derjaguin approximation or density functional theory. Particular attention is paid to the density dependence of the depletion potential. A second-order virial approximation is applied, which yields nearly exact results for the bulk properties of the hard-platelet fluid at densities two times smaller than the density of the isotropic fluid at isotropic-nematic phase coexistence. As the platelet density increases, the attractive primary minimum of the depletion potential deepens and an additional small repulsive barrier at larger sphere separations develops. Upon decreasing the ratio of the radius of the spheres and the platelets, the primary minimum diminishes and the position of the small repulsive barrier shifts to smaller values of the sphere separation.

Asunto(s)