RESUMEN
The influence of thermoplastic masks used in clinical routine for patient immobilization in head and neck radiotherapy treatment on the absorbed skin dose has been investigated at Gustave-Roussy Institute. The measurements were performed in 60Co gamma-rays, 4 and 6MV X-rays and in 8 and 10MeV electron beams. Initially, the measurements were performed with thermoluminescent dosimeters (LiF) and a NACP chamber on a polystyrene phantom in order to study the influence of physical parameters (distance, field size, energy...) on first millimeters depth variation dose. The study was completed with in vivo measurements on 14 patients using various dosimeters (thermoluminescent detectors, diodes) in order to assess the increase of dose on first millimeters depth and to verify the delivered dose during treatment sessions (quality control). In treatment conditions, masks lead to an important increase of dose on the first millimeter in 60Co gamma-rays beams (dose value normalized to maximum of dose increase from 57.1% to 77.7% for 0.5 mm-water depth and from 78.5% to 88% for 1 mm-water depth); its contribution is less important in 4 and 6 MV X-rays beams (dose value normalized to maximum of dose increase from 49.5% to 63.2% for 0.5 mm-water depth and from 59% to 70.1% for 1 mm-water depth). Concerning 8 and 10 MeV electron beams, the normalized dose value increase respectively from 78.4% to 81.7% and from 82.2% to 86.1% for 0.5 mm-water depth. In vivo dosimetry enabled the quality control of delivered dose during treatment. Measured dose is in agreement within +/- 5% with the prescribed dose for 92.3% of cases. In routine, in vivo dosimetry allowed to quantify the increase of skin dose induced by thermoplastic masks for various energies of photon and electron beams as well as quality control.