RESUMEN

As a consequence of the rapidly growing poultry industry, chicken litter is becoming an abundant and problematic waste. Anaerobic digestion of chicken litter can mitigate environmental issues while producing valuable by-products. Recent studies have shown that leach bed reactor (LBR) systems are suitable for processing chicken litter and that anaerobic digestion can be enhanced using biochar. This study investigates the influence of biochar position within an LBR system on anaerobic digestion of chicken litter. Compared to a system without biochar, application of biochar in both the LBR (mixed in with the feedstock or as a layer below the feedstock) and coupled leachate tank (LT) increased methane yield by 6 to 8% at 51 days and accelerated VFA degradation and methane production. More significant differences in methane yield were observed at shorter solid retention times. Biochar mixed in feedstock in addition to a filter in the LT performed best in terms of both methane and hydrogen sulfide production, with a 77% reduction in hydrogen sulfide yield and hydrogen sulfide contents maintained below 500 ppm. The enhanced rates of VFA degradation and methane production when applying biochar in both reactors corresponds with observed differences in the methanogen population. Biochar application in both reactors increased the abundance of Methanobacteriales in digestate and Methanosarcinaceae in leachate compared to the control. Microbial attachment and activity on biochar also increased when mixed in feedstock. Increased diversity of the methanogen population throughout the system, as well as increased activity on biochar, may have facilitated the syntrophic relationship between acetogenic bacteria and methanogens, thus accelerating VFA degradation and methane production. These results suggest mixing biochar in feedstock, in addition to a biochar filter in the LT, to enhance anaerobic digestion of chicken litter in this system.

Asunto(s)

RESUMEN

BACKGROUND: Training clinicians on the use of hospital-based patient monitoring systems (PMS) is vital to mitigate the risk of use errors and of frustration using these devices, especially when used in ICU settings. PMS training is typically delivered through face-to-face training sessions in the hospital. However, it is not always feasible to deliver training in this format to all clinical staff given some constraints (e.g., availability of staff and trainers to attend in-person training sessions and the costs associated with face-to-face training). OBJECTIVE: The literature indicates that E-learning has the potential to mitigate barriers associated with time restrictions for trainers and trainees and evidence shows it to be more flexible, and convenient for learners in healthcare settings. This study aimed to develop and carry out a preliminary evaluation via a case study of an e-learning training platform designed for a novel neonatal sepsis risk monitor system (Digi-NewB). METHODS: A multi-modal qualitative research case study approach was used, including the analysis of three qualitative data sources: (i) audio/video recordings of simulation sessions in which participants were asked to operate the system as intended (e.g., update the clinical observations and monitor the sepsis risk), (ii) interviews with the simulation participants and an attending key opinion leader (KOL), who observed all simulation sessions, and (iii) post-simulation survey. RESULTS: After receiving ethical approval for the study, nine neonatal intensive care unit (NICU) nurses completed the online training and participated in the simulation and follow-up interview sessions. The KOL was also interviewed, and seven out of the nine NICU nurses answered the post-simulation survey. The video/audio analysis of the simulations revealed that participants were able to use and interpret the Digi-NewB interface. Interviews with simulation participants and the KOL, and feedback extracted from the survey, revealed that participants were overall satisfied with the training platform and perceived it as an efficient and effective method to deliver medical device training. CONCLUSIONS: This study developed an online training platform to train clinicians in the use of a critical care medical device and carried out a preliminary evaluation of the platform via a case study. The e-learning platform was designed to supplement and enhance other training approaches. Further research is required to evaluate the effectiveness of this approach.

Asunto(s)

RESUMEN

Engineered stones are often characterized for their crystalline silica content. Their organic composition, particularly that of the emissions generated during fabrication work using hand-held power tools, is relatively unexplored. We forensically screened the emissions from dry-cutting 12 engineered stone products in a test chamber for their organic composition by pyrolysis-gas chromatography-mass spectrometry (GC-MS) plus selected traditional capture and analysis techniques. Phthalic anhydride, which has a Respiratory Sensitization (RSEN) Notation by the American Conference of Governmental Industrial Hygienists (ACGIH), was the most common and abundant compound, at 26-85% of the total organic composition of engineered stone emissions. Benzaldehyde and styrene were also present in all twelve samples. During active cutting, the predominant volatile organic compound (VOC) emitted was styrene, with phthalic anhydride, benzene, ethylbenzene, and toluene also detected. These results have important health implications as styrene and phthalic anhydride are irritants to the respiratory tract. This study suggests a risk of concurrent exposure to high levels of respirable crystalline silica and organic lung irritants during engineered stone fabrication work.

Asunto(s)

RESUMEN

Artificial stone (AS) is a composite material that has seen widespread use in construction, particularly for kitchen benchtops. However, fabrication processes with AS have been associated with serious lung disease. Safety data sheets (SDSs) aim to provide important information pertaining to composition and health risks. In the case of a complex mixture, SDSs may be problematic in terms of specific information on overall health risks. To assess this issue, we compared empirically determined mineral, metallic, and organic resin content of 25 individual AS products across six suppliers, with the corresponding SDS information. X-ray diffraction was used to quantitate the mineralogical components of AS samples, and X-ray fluorescence was used to estimate the metallic components. Organic material (resin content) was estimated using weight loss during calcination. Although the resin content for all AS samples was within the SDS-reported ranges, there was considerable variability in the crystalline silica content when comparing with supplier's SDS. Potentially toxicologically relevant metallic and mineral constituents were not reported. Some supplier SDSs were found to provide more information than others. Only one of the six suppliers provided crystalline mineral content other than silica, and only two suppliers provided any information about metals. There remains a limited understanding of lung pathogenesis from AS, and this study highlights the need for more comprehensive and standardized SDS information for risk assessment and management.

Asunto(s)

RESUMEN

Engineered stones are novel construction materials associated with a recent upsurge in silicosis cases among workers in the stonemason industry. In order to understand the hazard for the short latency of lung disease among stonemasons, we simulated real-time dust exposure scenario by dry-machining engineered stones in controlled conditions, capturing and analysing the respirable dust generated for physical and chemical characteristics. Natural granite and marble were included for comparison. Cutting engineered stones generated high concentrations of very fine particles (< 1 µm) with > 80% respirable crystalline silica content, in the form of quartz and cristobalite. Engineered stones also contained 8-20% resin and 1-8% by weight metal elements. In comparison, natural stones had far lower respirable crystalline silica (4- 30%) and much higher metal content, 29-37%. Natural stone dust emissions also had a smaller surface area than engineered stone, as well as lower surface charge. This study highlighted the physical and chemical variability within engineered stone types as well as between engineered and natural stones. This information will ultimately help understand the unique hazard posed by engineered stone fabrication work and help guide the development of specific engineering control measures targeting lower exposure to respirable crystalline silica.

Asunto(s)

RESUMEN

The photosynthetic pathway of plants is a fundamental trait that influences terrestrial environments from the local to global level. The distribution of different photosynthetic pathways in Australia is expected to undergo a substantial shift due to climate change and rising atmospheric CO2; however, tracking change is hindered by a lack of data on the pathways of species, as well as their distribution and relative cover within plant communities. Here we present the photosynthetic pathways for 2428 species recorded across 541 plots surveyed by Australia's Terrestrial Ecosystem Research Network (TERN) between 2011 and 2017. This dataset was created to facilitate research exploring trends in vegetation change across Australia. Species were assigned a photosynthetic pathway using published literature and stable carbon isotope analysis of bulk tissue. The photosynthetic pathway of species can be extracted from the dataset individually, or used in conjunction with vegetation surveys to study the occurrence and abundance of pathways across the continent. This dataset will be updated as TERN's plot network expands and new information becomes available.

Asunto(s)

RESUMEN

This paper is in response to the article entitled "The process of designing for learning: understanding university teachers' design work" (Bennett et al. in Educ Technol Res Dev 65(1):125-145, 2017). Design constitutes a fundamental part of what teachers do (Goodyear in HERDSA Rev Higher Educ 2:27-50, 2015). However, it has received negligible attention in the research literature. Bennett et al. make a significant contribution to knowledge by identifying and illustrating how university teachers engage in educational design. In particular, the paper identifies key areas for further support and the professional development of university teachers, including in the use of systematic design models and tools. This will help university teachers significantly, especially during the current pandemic has increased the design workload of university teachers as they endeavour to migrate and transtion their teaching online. Our response discusses Bennett et al. (2017) in the context of emergency remote teaching and the wholesale shift to new modalities of blended and online education. We also offer future suggestions arising from our review, including the importance of further international research on the topic.

RESUMEN

This study characterises the effect of biochar (pyrolysed biomass) produced from wood pellets, wheat straw and sheep manure on high-solids anaerobic digestion (HSAD) of poultry litter. Also, pre-loading biochar with microorganisms before addition to HSADs was investigated. The addition of wood pellet biochar provides a 32% increase to the methane yield compared with control digesters. The addition of biochar produced from either wheat straw or sheep manure has detrimental effects on digester performance compared with controls. The addition of wood pellet biochar pre-loaded by placing it in a high-solids digester for 90 days provides a 69% increase in the total methane yield, 44% increase in the peak daily methane yield and a 33% reduction in the lag time compared with controls. This study highlighted a need for careful selection of parent material for biochar production and, for the first time, the opportunities to re-use wood pellet biochar for further improvements.

Asunto(s)

RESUMEN

BACKGROUND: People living with persistent pain in Australia often cannot access adequate care to manage their pain. Therefore, as the most accessible healthcare professionals, community pharmacists have an important role to play in helping to improve patient outcomes. Hence, it is important to investigate patient needs and expectations in terms of counseling interactions with pharmacists, along with pharmacists' approach to counseling interactions with these patients. METHOD: The nature of patient-pharmacist counseling interactions was explored with seven patients (one focus group), and 10 practicing pharmacists (two focus groups, three semi-structured interviews). The themes identified informed the development of an online survey that was advertised online to patients and pharmacists across Australia. RESULTS: A total of 95 patients and 208 pharmacists completed the survey. Overall, more than half of patients (77/95) were satisfied with the care provided by their pharmacist, but only a third (71/205) of pharmacists were satisfied with the care they provided to patients. The majority of patients (67/94) reported that pharmacists provided good information about medications. This aligned with pharmacists' responses, as most reported focusing on medication side effects (118/188) and instructions for taking pain medication (93/183) during patient interactions. However, when asked about empathy and rapport from pharmacists, only half to two-thirds (48-61/95) of patients expressed positive views. Overall, half of the patients (39/75) wanted a caring, empathetic, respectful, and private conversation with the pharmacist, and nearly half (40/89) perceived the pharmacist's role as providing (new) information on alternative pharmacological and non-pharmacological therapies, including general advice on pain management. CONCLUSION: There was a disparity in the nature of the interaction and information that patients wanted from pharmacists, compared to what was provided by pharmacists. Training and education may help pharmacists to better engage in patient-centered care when interacting with people living with persistent pain, thereby improving health outcomes for these patients.

RESUMEN

Soil microorganisms are an important indicator of soil fertility and health. However, our state of knowledge about soil microbial activities, community compositions and carbon use patterns under metal contaminations is still poor. This study aimed to evaluate the influences of heavy metals (Cd and Pb) on soil microorganisms by investigating the microbial community composition and carbon use preferences. Metal pollution was approached both singly and jointly with low (25 and 2500 mg kg-1) and high (50 and 5000 mg kg-1) concentrations of Cd and Pb, respectively, in an artificially contaminated soil. In a laboratory incubation experiment, bio-available and potentially bio-available metal concentrations, selected soil properties (pH, electrical conductivity, total organic carbon and total nitrogen), and microbial parameters (microbial activity as basal respiration, microbial biomass carbon (MBC) and microbial functional groups) were determined at two sampling occasions (7 and 49 days). Metal contamination had no effect on the selected soil properties, while it significantly inhibited both microbial activity and MBC formation. Contaminated soils had higher microbial quotient (qCO2), suggesting there was higher energy demand with less microbially immobilized carbon as MBC. Notably, the efficiency of microbial carbon use was repressed as the metal concentration increased, yet no difference was observed between metal types (p > 0.05). Based on the microbial phospholipid fatty acids (PLFA) analysis, total PLFAs decreased significantly under metal stress at the end of incubation. Heavy metals had a greater negative influence on the fungal population than bacteria with respective 5-35 and 8-32% fall in abundances. The contaminant-driven (metal concentrations and types) variation of soil PLFA biomarkers demonstrated that the heavy metals led to the alteration of soil microbial community compositions and their activities, which consequently had an adverse impact on soil microbial carbon immobilization.

Asunto(s)

Asunto(s)

RESUMEN

BACKGROUND: Each year, millions of older adults fall, with more than 1 out of 4 older people experiencing a fall annually, thereby causing a major social and economic impact. Falling once doubles one's chances of falling again, making fall prediction an important aspect of preventative strategies. In this study, 22 older adults aged between 65 and 85 years were trained in the use of a smartphone-based fall prediction system. The system is designed to continuously assess fall risk by measuring various gait and balance parameters using a smart insole and smartphone, and is also designed to detect falls. The use case of the fall prediction system in question required the users to interact with the smartphone via an app for device syncing, data uploads, and checking system status. OBJECTIVE: The objective of this study was to observe the effect that basic smartphone training could have on the user experience of a group that is not technically proficient with smartphones when using a new connected health system. It was expected that even short rudimentary training could have a large effect on user experience and therefore increase the chances of the group accepting the new technology. METHODS: All participants received training on how to use the system smartphone app; half of the participants (training group) also received extra training on how to use basic functions of the smartphone, such as making calls and sending text messages, whereas the other half did not receive this extra training (no extra training group). Comparison of training group and no extra training group was carried out using metrics such as satisfaction rating, time taken to complete tasks, cues required to complete tasks, and errors made during tasks. RESULTS: The training group fared better in the first 3 days of using the system. There were significant recorded differences in number of cues required and errors committed between the two groups. By the fourth and fifth day of use, both groups were performing at the same level when using the system. CONCLUSIONS: Supplementary basic smartphone training may be critical in trials where a smartphone app­based system for health intervention purposes is being introduced to a population that is not proficient with technology. This training could prevent early technology rejection and increase the engagement of older participants and their overall user experience with the system.

RESUMEN

Soil organic carbon is essential to improve soil fertility and ecosystem functioning. Soil microorganisms contribute significantly to the carbon transformation and immobilisation processes. However, microorganisms are sensitive to environmental stresses such as heavy metals. Applying amendments, such as biochar, to contaminated soils can alleviate the metal toxicity and add carbon inputs. In this study, Cd and Pb spiked soils treated with macadamia nutshell biochar (5% w/w) were monitored during a 49days incubation period. Microbial phospholipid fatty acids (PLFAs) were extracted and analysed as biomarkers in order to identify the microbial community composition. Soil properties, metal bioavailability, microbial respiration, and microbial biomass carbon were measured after the incubation period. Microbial carbon use efficiency (CUE) was calculated from the ratio of carbon incorporated into microbial biomass to the carbon mineralised. Total PLFA concentration decreased to a greater extent in metal contaminated soils than uncontaminated soils. Microbial CUE also decreased due to metal toxicity. However, biochar addition alleviated the metal toxicity, and increased total PLFA concentration. Both microbial respiration and biomass carbon increased due to biochar application, and CUE was significantly (p<0.01) higher in biochar treated soils than untreated soils. Heavy metals reduced the microbial carbon sequestration in contaminated soils by negatively influencing the CUE. The improvement of CUE through biochar addition in the contaminated soils could be attributed to the decrease in metal bioavailability, thereby mitigating the biotoxicity to soil microorganisms.

Asunto(s)

RESUMEN

BACKGROUND: Pregabalin is a treatment option for patients with persistent neuropathic pain. Its use has been associated with changes in mood and the development of depression and/or suicidal ideation. OBJECTIVE: Case presentations were reviewed of five patients reporting changes in mood, depression and suicidal ideation from the first 50 (approximately) patients commenced on pregabalin at the clinic. DISCUSSION: Although these patients had a history of depression, their mood had been stable before commencing pregabalin. Soon after commencement they reported changes in mood, and development of depression and/or suicidal ideation, which improved with dose reduction or cessation of pregabalin. Ultimately, all five patients ceased pregabalin treatment. Suicidal ideation is a recognised adverse effect of pregabalin. Patients should be warned of and monitored for deterioration in mood.

Asunto(s)

RESUMEN

OBJECTIVES: To test the activity of two copper-based biocides, CuAL42 and CuWB50, and benzalkonium chloride against 169 isolates of methicillin-resistant Staphylococcus aureus (MRSA) pulsotype USA300, a virulent, multiply resistant, widespread clone in the USA. METHODS: Tests including MIC, MBC and time-kill studies were performed multiple times. RESULTS: The MIC range, MIC(50) and MIC(90) (0.59-18.75, 4.69 and 4.69 ppm, respectively) and the MBC range, MBC(50) and MBC(90) (1.17-18.75, 4.69 and 9.38 ppm, respectively) for CuAL42 were identical with those obtained with CuWB50, except that the MBC range for CuWB50 was wider (0.59-37.5 ppm). In time-kill studies, a 6 log(10) reduction of cfu was achieved within 1 h (150 ppm) and 0.5 h (300 ppm) for CuAL42, and 1.5 h (150 ppm) and 0.75 h (300 ppm) for CuWB50. CONCLUSIONS: Both copper-based biocides can effectively kill USA300 MRSA and may facilitate the eradication of the organism from healthcare settings.

Asunto(s)

RESUMEN

BACKGROUND: Traditional laundry decontamination relies on thermal disinfection that degrades textiles. We investigated the ability of a novel copper-based biocidal compound, CuWB50, to assist in the decontamination of swatches purposely contaminated with Staphylococcus aureus and Acinetobacter during "real-life" low-temperature machine washing with and without 2 commercial detergents. METHODS: Contaminated and noncontaminated swatches were attached to ballast sheets and washed in cold water for 15 minutes in an industrial Electrolux machine. We assessed colony-forming units (cfu) on the swatches and in the postwash water. RESULTS: Low-temperature machine washing produced only partial reductions in viable methicillin-resistant Staphylococcus aureus and Acinetobacter calcoaceticus baumannii counts on swatches and resulted in cross contamination of other swatches in the same wash. Washing with CuWB50 alone at high concentration (100 mg/L), however, resulted in superior decontamination compared with water alone, whereas washing with a combination of detergent and CuWB50 at low concentration (5 mg/L) yielded synergistic and complete decontamination of swatches and postwash water. CONCLUSION: Our results show highly effective laundry decontamination using CuWB50 with detergent at low temperature and are timely both in terms of rising energy costs and textile degradation issues.

Asunto(s)

RESUMEN

BACKGROUND: Hand cleanliness is important in hospital infection control, but skin irritation from frequent alcohol-based hand rub use reduces compliance. We have compared a new copper biocide/Aloe vera-based biocidal hand rub (Xgel) with 7 commercially available hand rubs. METHODS: Hand rubs were cultured with human skin cells for 24 hours after which cytotoxicity was assessed using the sulforhodamine B assay. The EN 12054 bacterial suspension test protocol was used to assess biocidal activity of 2 of the least cytotoxic hand rubs (Xgel and Purell). RESULTS: Hand rubs had 50% cytotoxic concentrations ranging from >10% to <0.1% vol/vol. In the EN12054 assay, Xgel reduced colony forming units (CFU) by >10(8) with methicillin-resistant Staphylococcus aureus (MRSA) and Acinetobacter in 1 minute, whereas Purell only reduced CFU by 10(4) and 10(5), respectively. Purell was ineffective against C difficile spores, whereas Xgel produced a 3 x 10(3) reduction in CFU. CONCLUSION: The hand rubs had a wide range of cytotoxicity values for human skin cells, with Xgel being the least cytotoxic to human skin cells. In the EN 12054 bacterial suspension test, Xgel was more effective than Purell against all organisms tested. It should be noted that these in vitro results may not translate into clinical differences.

Asunto(s)

RESUMEN

Avian influenza H5N1 infections can cause severe, lethal human infections. Whether influenza A virus treatments effectively ameliorate avian influenza H5N1 human infections is uncertain. The research objective was to evaluate the efficacy of novel zinc and other metallo-ion formulations in two influenza A mouse models. Mice infected with influenza A/Duck/MN/1525/81 (H5N1) virus were treated orally 48 h before virus exposure and then twice daily for 13 days with ZnAL42. The optimal dosing regimen for ZnAL42 was achieved at 17.28 mg/kg 48 h prior to virus exposure, twice daily for 7 days. The survival rate was 80% compared with 10% in the untreated control group and a 100% survival rate with ribavirin (75 mg/kg/day, twice a day for 5 days, beginning 4 h before virus exposure). ZnAL42 treatment significantly lessened the decline in arterial oxygen saturation (SaO2; P < 0.001). This regimen was also well tolerated by the mice. Manganese and selenium formulations were not inhibitory to virus replication when given therapeutically. Mice were also infected with influenza A/NWS/33 (H1N1) virus and were treated 48 h before virus exposure with three dosages of ZnAL42 (8.64, 1.46 or 0.24 mg/kg/day). Treatment was by oral gavage twice daily for 13 days. The highest dose of ZnAL42 was significantly inhibitory to the virus infection as seen by prevention of deaths and lessening of decline in SaO2. The data suggest that the prophylactic use of ZnAL42 is effective against avian influenza H5N1 or H1N1 virus infection in mice and should be further explored as an option for treating human influenza virus infections.

Asunto(s)

RESUMEN

OBJECTIVES: We investigated three novel highly charged copper-based inorganic biocidal formulations for their activity against organisms highly relevant to healthcare-associated infection. METHODS: The three copper-based formulations were tested: (i) against clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA), Legionella pneumophila, Acinetobacter calcoaceticus/baumannii (ACCB), glycopeptide-resistant Enterococcus and spores of Clostridium difficile in time-kill assays; (ii) for their ability to decontaminate ultramicrofibre (UMF) cloths; and (iii) for their cytotoxicity to human skin and intestinal epithelial cells. RESULTS: All three copper-based formulations were potently biocidal down to concentrations of 1 ppm for both stationary- and log-phase organisms, and they were all active against C. difficile spores. At 150 ppm, they achieved a complete (>6 log10) kill of MRSA and ACCB mostly within 1 h. This biocidal activity was not achieved by copper sulphate or the inorganic binders used in the formulations. All three copper-based formulations completely decontaminated UMF cloths containing MRSA, ACCB or C. difficile spores, suggesting that any of these copper-based formulations would be highly beneficial in the healthcare environment. All three copper-based formulations and copper sulphate were not cytotoxic to human epithelial cells up to concentrations of 100-200 ppm. CONCLUSIONS: All three of the novel copper-based biocidal formulations, but not their components (copper sulphate and inorganic binders), have potent activity against organisms highly relevant to healthcare-associated infections.

Asunto(s)