RESUMEN
Secondary dendrite arm spacing (SDAS) is one of the most important factors affecting macrosegregation and mechanical properties in solidification processes. Predicting SDAS is one of the major parameters in foundry technology. In order to predict the evolution of microstructures during the solidification process, we proposed a simple model which predicted the secondary dendrite arm spacing based solely on the tip velocity (related to the tip supersaturation) and cooling rate. The model consisted of a growing cylinder inside a liquid cylindrical envelope. Two important hypotheses were made: (1) Initially the cylinder radius was assumed to equal the dendrite tip radius and (2) the cylindrical envelope had a fixed radius in the order of the dendrite tip diffusion length. The numerical model was tested against experiments using various Pb-Sn alloys for a fixed temperature gradient. The results were found to be in excellent agreement with experimental measurements in terms of SDAS and dendrite tip velocity prediction. This simple model is naturally destined to be implemented as a sub-grid model in volume-averaging models to predict the local microstructure, which in turn directly controls the mushy zone permeability and macrosegregation phenomena.
RESUMEN
Research efforts have been dedicated to predicting microstructural evolution during solidification processes. The main secondary arm spacing controls the mushy zone's permeability. The aim of the current work was to build a simple sub-grid model that describes the growth and coarsening of secondary side dendrite arms. The idea was to reduce the complexity of the curvature distribution with only two adjacent side arms in concurrence. The model was built and applied to the directional solidification of Al-06wt%Cu alloy in a Bridgman experiment. The model showed its effectiveness in predicting coarsening phenomena during the solidification of Al-06wt%Cu alloy. The results showed a rapid growth of both arms at an earlier stage of solidification, followed by the remelting of the smaller arm. In addition, the results are in good agreement with an available time-dependent expression which covers the growth and coarsening. Such model can be implemented as a sub-grid model in volume average models for the prediction of the evolution of the main secondary arms spacing during macroscopic solidification processes.