RESUMEN
We report on magneto-optical resonances observed in sodium fluorescence from D2 manifold with an intensity-modulated light. Fluorescence resonances are measured in the perpendicular (90°) and backward (180°) directions to the light propagation in laboratory experiments using a sodium cell containing neon buffer gas. Properties of these resonances are studied by varying the magnetic field at fixed-light modulation frequency, and vice-versa. Modulation with low-duty cycle shows higher-harmonic resonances of the modulation frequency and sub-harmonic resonances of the Larmor frequency. A dark resonance with maximum amplitude for laser wavelength closer to the crossover peak is observed. The origin of this dark resonance observed in Na D2 line is discussed using a theoretical model. Present study is aimed towards improving the understanding of magneto-optical resonances for remote magnetometry applications with mesospheric sodium.
RESUMEN
We report on a simple experimental scheme based on a pair of cylindrical lenses (convex and concave) of the same focal length and common optical elements, producing high power optical beams in 1D and/or 2D Airy intensity profiles with laser polarization as the control parameter. Using an ultrafast Yb-fiber laser at 1064 nm of average power of 5 W in a Gaussian spatial profile and pulse width of â¼180 fs, we have generated 1D and 2D Airy beams at an efficiency of 80% and 70%, respectively, and a pulse width of â¼188 and â¼190 fs, respectively. We have measured the transverse deflection rate of 1D and 2D beams to be â¼5.0×10-5 1/mm and â¼2.0×10-5 1/mm, respectively. Simply rotating the polarization state of the 1D cubic phase modulated beam in the experiment, we can produce 1D and 2D Airy beams on demand. Using a 5 mm long bismuth borate (BiB3O6), we have also studied frequency-doubling characteristics of both 1D and 2D Airy beams. Like the 2D Airy beam, the 1D Airy beam also produces a frequency-doubled 1D Airy and an additional 1D spatial cubic structure. Like the Gaussian beams, we have observed the focusing dependence of conversion efficiency for both 1D and 2D Airy beams, producing green 1D and 2D Airy beams of output powers in excess of 110 and 150 mW for 3.4 and 2.8 W of fundamental power, respectively.