RESUMEN

Early failure of silicone voice prostheses resulting from fungal colonization and biofilm formation poses a major concern in modern ear nose throat surgery. Therefore, developing new infection prevention techniques to prolong those implants' survivorship is crucial. We designed an in vitro laboratory study to include nanomaterial-enhanced polymer coating with a plasma spraying technique against Candida albicans growth to address this issue. The anti-biofilm effects of high- and low-dose Al2O3 nanowire and TiO2 nanoparticle coatings were studied either alone or in conjunction with each other using checkerboard testing. It was demonstrated that both nanomaterials were capable of preventing fungal biofilm formation regardless of the anti-fungal agent concentration (median absorbance for high-dose Al2O3-enhanced polymer coating was 0.176 [IQR = 0.207] versus control absorbance of 0.805 [IQR = 0.381], p = 0.003 [98% biofilm reduction]; median absorbance for high-dose TiO2-enhanced polymer coating was 0.186 [IQR = 0.024] versus control absorbance of 0.766 [IQR = 0.458], p < 0.001 [93% biofilm reduction]). Furthermore, synergy was revealed when the Bliss model was applied. According to the findings of this work, it seems that simultaneous consideration of Al2O3 and TiO2 could further increase the existing antibiofilm potential of these nanomaterials and decrease the likelihood of localized toxicity.

RESUMEN

PURPOSE: Periprosthetic joint infections induced by methicillin-resistant Staphylococcus aureus (MRSA) pose a major socioeconomic burden. Given the fact that MRSA carriers are at high risk for developing periprosthetic infections regardless of the administration of eradication treatment pre-operatively, the need for developing new prevention modalities is high. METHODS: The antibacterial and antibiofilm properties of vancomycin, Al2O3 nanowires, and TiO2 nanoparticles were evaluated in vitro using MIC and MBIC assays. MRSA biofilms were grown on titanium disks simulating orthopedic implants, and the infection prevention potential of vancomycin-, Al2O3 nanowire-, and TiO2 nanoparticle-supplemented Resomer® coating was evaluated against biofilm controls using the XTT reduction proliferation assay. RESULTS: Among the tested modalities, high- and low-dose vancomycin-loaded Resomer® coating yielded the most satisfactory metalwork protection against MRSA (median absorbance was 0.1705; [IQR = 0.1745] vs control absorbance 0.42 [IQR = 0.07]; p = 0.016; biofilm reduction was 100%; and 0.209 [IQR = 0.1295] vs control 0.42 [IQR = 0.07]; p < 0.001; biofilm reduction was 84%, respectively). On the other hand, polymer coating alone did not provide clinically meaningful biofilm growth prevention (median absorbance was 0.2585 [IQR = 0.1235] vs control 0.395 [IQR = 0.218]; p < 0.001; biofilm reduction was 62%). CONCLUSIONS: We advocate that apart from the well-established preventative measures for MRSA carriers, loading implants with bioresorbable Resomer® vancomycin-supplemented coating may decrease the incidence of early post-op surgical site infections with titanium implants. Of note, the payoff between localized toxicity and antibiofilm efficacy should be considered when loading polymers with highly concentrated antimicrobial agents.

Asunto(s)

RESUMEN

Ultrafast laser patterning is an essential technology for the low-cost and large area production of flexible Organic Electronic (OE) devices, such as Organic Photovoltaics (OPVs). In order to unleash the potential of ultrafast laser processing to perform the selective and high precision removal of complex multilayers from printed OPV stacks without affecting the underlying nanolayers, it is necessary to optimize its parameters for each nanolayer combination. In this work, we developed an efficient on-the-fly picosecond (ps) laser scribing process (P1, P2 and P3) using single wavelength and single step/pass for the precise and reliable in-line patterning of Roll-to-Roll (R2R) slot-die-coated nanolayers. We have investigated the effect of the key process parameters (pulse energy and overlap) on the patterning quality to obtain high selectivity on the ablation of each individual nanolayer. Finally, we present the implementation of the ultrafast laser patterning process in the manufacturing of fully R2R printed flexible semitransparent OPV modules with a 3.4% power conversion efficiency and 91% Geometric Fill Factor (GFF).

RESUMEN

PURPOSE: Even though effective techniques in diagnosis of periprosthetic joint infections (PJIs) have been developed, the optimal modality has yet to be determined. The present meta-analysis aimed to compare the diagnostic accuracy of dithiothreitol (DTT) and sonication against the Musculoskeletal Infection Society criteria in patients undergoing revision joint surgery. METHODS: We searched the PubMed, Scopus, and Central Cochrane register of controlled trials as well as gray literature until the 9th of November, 2021. We included articles considering the comparative diagnostic accuracy of sonication and DTT in adult patients having revision hip and knee arthroplasty for septic or aseptic reasons. We calculated pooled sensitivity, specificity, and diagnostic accuracy of the above diagnostic techniques against the Musculoskeletal Infection Society (MSIS) criteria and created receiver operating characteristics (ROC) curves to enable comparisons between each other. The quality of included papers was evaluated utilizing QUADAS-2 and QUADAS-C tools. RESULTS: Data from five comparative studies totaling 726 implants were pooled together. The diagnostic accuracy of DTT and sonication were 86.7% (95% CI 82.7 to 90.1) and 83.9% (95% CI 79.7 to 87.5), respectively. Pooled sensitivity and specificity showed no statistically significant differences between DTT and sonication (0.7 [95% CI 0.62 to 0.77] vs 0.72 [95% CI 0.65 to 0.78], p = 0.14; and 0.99 [95% CI 0.97 to 1] vs 0.97 [95% CI 0.93 to 0.99], p = 5.5, respectively). CONCLUSIONS: This meta-analysis did not identify any clinically meaningful difference between the diagnostic potential of sonication and the chemical-based biofilm dislodgment methods. This finding remained robust after adjusting for the administration of antibiotics prophylaxis, implementation of the polymerase chain reaction of sonicated fluid, and study quality.

Asunto(s)

RESUMEN

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is among the most widely used polymers that are used as printed transparent electrodes for flexible Organic Electronic (OE) devices, such as Organic Photovoltaics (OPVs). The understanding of their optical properties and the correlation of the optical properties with their electronic properties and metallic-like behavior can lead to the optimization of their functionality as transparent electrodes in multilayer OE device architectures. In this work, we study the optical properties of different PEDOT:PSS formulations by non-destructive Spectroscopic Ellipsometry (SE), from the infrared to the far ultraviolet spectral regions. The optical response of PEDOT:PSS includes an intense optical absorption originated from the conductive part (PEDOT) at lower photon energies, whereas the electronic transition energies of the non-conductive PSS part have been measured at higher photon energies. Based on the different PEDOT:PSS formulations, the optical investigation revealed significant information on the relative contribution of conductive PEDOT and insulating PSS parts of the PEDOT:PSS formulation in the overall optical response, which can strongly impact the final device functionality and its optical transparency.