RESUMEN
Centrifuge are common machines used for sludge thickening and dewatering in wastewater treatment plant but performances and optimal setting parameters are often difficult to predict and optimize, owing to complex mechanisms occurring during separation and high shear stresses undergone by flocs. Laboratory tests are necessary to assess performances and to screen chemicals and dosage in order to decrease optimization time at full scale. They include volatile matters characterization, drainage and CST tests vs mixing time, basket spin tests with shearing, limit dryness determination. The ability of these tests, to assess sludge dehydration and/or to select polymer and dosage, is discussed and is compared with performances obtained in a screw centrifuge decanter at lab and full scale.
Asunto(s)
Aguas del Alcantarillado , Eliminación de Residuos Líquidos , Tornillos Óseos , Centrifugación , Polímeros , AguaRESUMEN
For carrying out sludge lab-scale tests, and interlaboratory trials for standards validation, the availability of samples with "certified and constant" characteristics is required. When "dried sludge" samples cannot be used, problems arise because (i) most fresh sludge characteristics change with storage time, also because some preservation practices are not applicable or their effects unknown, (ii) some fresh sludge characteristics are strongly affected by handling, and (iii) fresh sludge requires particular precautions and authorization for transportation. This means that using "fresh sludge" samples cannot guarantee reliability and reproducibility of results, so a valid alternative consists in testing "synthetic suspensions" samples to be on-site prepared. This should also give the possibility to compare results obtained in different places and times. Within this framework, Task Group 3 (TG3) of Working Group 1 (WG1) of Technical Committee 308 (TC308) of European Standardization Committee (CEN) undertook the preparation of a Technical Report dealing with the preparation of synthetic suspensions, both inorganic and organic, in repeatable conditions, able to describe the behaviour of a real sludge. This paper discusses a proposal for ingredients and modalities to prepare such synthetic suspensions that will be systematically tested in already planned lab experiments to define an optimal recipe.