RESUMEN
Complex concentrated alloys (CCAs) are a new family of materials with near equimolar compositions that fluctuate depending on the characteristics and destination of the material. CCAs expand the compositional limits of the traditional alloys, displaying new pathways in material design. A novel light density Al5Cu0.5Si0.2Zn1.5Mg0.2 alloy was studied to determine the structural particularities and related properties. The alloy was prepared in an induction furnace and then annealed under a protective atmosphere. The resulted specimens were analysed by chemical, structural, mechanical, and corrosion resistance. The structural analyses revealed a predominant FCC and BCC solid solution structure. The alloy produced a compression strength of 500-600 MPa, comparable with conventional aluminium alloys. The corrosion resistance in 3.5% NaCl solution was 0.3424 mm/year for as-cast and 0.1972 mm/year for heat-treated alloy, superior to steel, making the alloy a good candidate for marine applications.
RESUMEN
Zirconium dioxide (ZrO2) is one of the ceramic materials with high potential in many areas of modern technologies. ZrO2 doped with 8 wt.% (~4.5 mol%) Y2O3 is a commercial powder used for obtaining stabilized zirconia materials (8 wt.% YSZ) with high temperature resistance and good ionic conductivity. During recent years it was reported the co-doping with multiple rare earth elements has a significant influence on the thermal, mechanical and ionic conductivity of zirconia, due complex grain size segregation and enhanced oxygen vacancies mobility. Different methods have been proposed to synthesize these materials. Here, we present the hydrothermal synthesis of 8 wt.% (~4.5 mol%) YSZ co-doped with 4, 6 and 8 wt.% La2O3, Nd2O3, Sm2O3 and Gd2O3 respectively. The crystalline phases formed during their thermal treatment in a large temperature range were analyzed by X-ray diffraction. The evolution of phase composition vs. thermal treatment temperatures shows as a major trend the formation at temperatures >1000 °C of a cubic solid solutions enriched in the rare earth oxide used for co-doping as major phase. The first results on the thermal conductivities and impedance measurements on sintered pellets obtained from powders co-doped with 8 wt.% Y and 6% Ln (Ln = La, Nd, Sm and Gd) and the corresponding activation energies are presented and discussed. The lowest thermal conductivity was obtained for La co-doped 8 wt.% YSZ while the lowest activation energy for ionic conduction for Gd co-doped 8 wt.% YSZ materials.