RESUMEN
In this work, lovegrass (Cpa), an abundant grass of the Poaceae family, was employed as feedstock for the production of activated carbon in a conventional furnace using ZnCl2 as a chemical activator. The prepared material (Cpa-AC) was characterized by pH of the point of zero charges (pHpzc), Boehm's titration method, CHN/O elemental analysis, ATR-FTIR, N2 adsorption/desorption curves, and SEM. This carbon material was used for adsorption of acetylsalicylic acid (ASA) and sodium diclofenac (DFC). FTIR analysis identified the presence of O-H, N-H, O-C=O), C-O, and aromatic ring bulk and surface of (Cpa-AC) adsorbent. The quantification of the surface functional groups showed the presence of a large amount of acidic functional groups on the surface of the carbon material. The isotherms of adsorption and desorption of N2 confirm that the Cpa-AC adsorbent is mesopore material with a large surface area of 1040 m2 g-1. SEM results showed that the surface of Cpa-AC is rugous. The kinetic study indicates that the system followed the pseudo-second-order model (pH 4.0). The equilibrium time was achieved at 45 (ASA) and 60 min (DCF). The Liu isotherm model best fitted the experimental data. The maxima sorption capacities (Qmax) for ASA and DFC at 25 °C were 221.7 mg g-1 and 312.4 mg g-1, respectively. The primary mechanism of ASA and DFC adsorption was justified considering electrostatic interactions and π-π interactions between the Cpa-AC and the adsorbate from the solution.
Asunto(s)
Eragrostis , Preparaciones Farmacéuticas , Contaminantes Químicos del Agua/análisis , Adsorción , Carbón Orgánico , Concentración de Iones de Hidrógeno , Cinética , PoaceaeRESUMEN
Eragrostis plana Nees leaves, abundant lignocellulosic biomass, was used as carbon source for preparation of activated carbon, by using microwave-assisted pyrolysis and chemical activation. The novel activated carbon (MWEPN) was characterised by FTIR, CHN elemental analysis, Boehm's titration method, TGA, SEM, N2 adsorption/desorption curves and pH of the point of zero charge (pHpzc). Afterwards, the adsorbent was successfully employed for adsorption of the two emerging contaminants (caffeine and 2-nitrophenol). The results indicated that MWEPN had a predominantly mesoporous structure with a high surface area of 1250 m2 g-1. FTIR analysis indicated the presence of carbonyl, hydroxyl and carboxylic groups on the surface of MWEPN. The Boehm analysis showed the existence of the high amount of acid moieties on the surface of activated carbon. Adsorption kinetic indicated that the system followed the Avrami fractional order at the optimal pH of 7. The equilibrium time was attained at 30 min. The Liu isotherm model better described the isothermal data. Based on the Liu isotherm, the maximum sorption capacities (Qmax) of caffeine and 2-nitrophenol adsorbed onto activated carbon at 25 °C were 235.5 and 255.8 mg g-1, respectively.
Asunto(s)
Carbón Orgánico/química , Eragrostis/química , Microondas , Pirólisis , Contaminantes Químicos del Agua/química , Agua/química , Adsorción , Concentración de Iones de Hidrógeno , Hojas de la Planta/química , Purificación del Agua/métodosRESUMEN
The acute toxicity of titanium dioxide nanoparticles (nTiO2) that occur concomitantly in the aquatic environment with other contaminants such as arsenic (As) is little known in crustaceans. The objective of the present study is to evaluate whether coexposure to nTiO2 can influence the accumulation, metabolism, and oxidative stress parameters induced by arsenic exposure in the gills and hepatopancreas of the shrimp Litopenaeus vannamei. Organisms were exposed by dissolving chemicals in seawater (salinity = 30) at nominal concentrations of 10 µg/L nTiO2 or As(III), dosed alone and in combination. Results showed that there was not a significant accumulation of As in either tissue type, but the coexposure altered the pattern of the metabolism. In the hepatopancreas, no changes were observed in the biochemical response, while in the gills, an increase in the glutamate-cysteine-ligase (GCL) activity was observed upon exposure to As or nTiO2 alone, an increase in the reduced glutathione (GSH) levels was observed upon exposure to As alone, and an increase in the total antioxidant capacity was observed upon exposure to nTiO2 or nTiO2 + As. However, these modulations were not sufficient enough to prevent the lipid damage induced by nTiO2 exposure. Our results suggest that coexposure to nTiO2 and As does not alter the toxicity of this metalloid in the gills and hepatopancreas of L. vannamei but does alter its metabolism, favoring its accumulation of organic As species considered moderately toxic.
Asunto(s)
Arsénico/toxicidad , Nanopartículas/toxicidad , Penaeidae/efectos de los fármacos , Titanio/toxicidad , Contaminantes Químicos del Agua/toxicidad , Animales , Antioxidantes/metabolismo , Arsénico/análisis , Arsénico/metabolismo , Glutatión/metabolismo , Hepatopáncreas/efectos de los fármacos , Hepatopáncreas/metabolismo , Nanopartículas/análisis , Nanopartículas/metabolismo , Estrés Oxidativo/efectos de los fármacos , Penaeidae/metabolismo , Titanio/análisis , Titanio/metabolismo , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/metabolismoRESUMEN
Hydrogen reduction of cationic or neutral Ir(i) compounds, namely [Ir(COD)(2)]BF(4) and [Ir(COD)Cl](2)respectively. in the ionic liquid (IL) 1-alkyl-3-methylimidazolium tetrafluoroborate affords either irregularly sized spherical (from 1.9 +/- 0.4 to 3.6 +/- 0.9 nm) or worm-like metal nanoparticles, depending on the nature of the imidazolium alkyl group and the type of iridium precursor. The ionic Ir(i) precursor tends to be dissolved and concentrated on the IL polar domains (populated by the imidazolium nucleus and tetrafluoroborate anions) while the neutral precursor dissolves preferentially in the non-polar region of the IL (populated mainly by N-alkyl side chains). The size, or volume, of the nano-region where the Ir(i) precursor is dissolved and reduced, determines the size and, probably, the shape of the formed nanoparticles. The HR-TEM image shows that the Ir(0) with worm-like shape are polycrystalline and formed from aggregation individual "spherical" nanoparticles of around 1.9 nm. The catalytic activity of Ir(0) NPs on the hydrogenation of cyclohexene (0.01 mol L(-1) of Ir atoms in IL, 75 degrees C, 8 bar of H(2), 500 rpm stirring, 1/1000 Ir(0)/cyclohexene ratio) is always greater in C(1)C(10)I.BF(4) than C(1)C(4)I.BF(4), regardless of the nature of Ir(i) precursor. Moreover, the cyclohexene hydrogenations performed with Ir(0) nanocatalysts made from ionic Ir(i) precursor are approximately twice faster than those NPs obtained from the neutral Ir(i) precursor, in the same IL.
RESUMEN
Transition metal-containing membrane films of 10, 20, and 40 µm thickness were obtained by the combination of irregularly shaped nanoparticles with monomodal size distributions of 4.8 ± 1.1 nm (Rh(0)) and 3.0 ± 0.4 nm (Pt(0)) dispersed in the ionic liquid (IL) 1-n-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide (BMI·(NTf)(2)) with a syrup of cellulose acetate (CA) in acetone. The Rh(0) and Pt(0) metal concentration increased proportionally with increases in film thickness up to 20 µm, and then the material became metal saturated. The presence of small and stable Rh(0) or Pt(0) nanoparticles induced an augmentation in the CA/IL film surface areas. The augmentation of the IL content resulted in an increase of elasticity and decrease in tenacity and toughness, whereas the stress at break was not influenced. The introduction of IL probably causes an increase in the separation between the cellulose macromolecules that results in a higher flexibility, lower viscosity, and better formability of the cellulose material. The nanoparticle/IL/CA combinations exhibit an excellent synergistic effect that enhances the activity and durability of the catalyst for the hydrogenation of cyclohexene. The nanoparticle/IL/cellulose acetate film membranes display higher catalytic activity (up to 7353 h(-1) for the 20 µm film of CA/IL/Pt(0)) and stability than the nanoparticles dispersed only in the IL.
Asunto(s)
Celulosa , Hidrogenación , Líquidos Iónicos , Membranas Artificiales , Nanopartículas del Metal , Catálisis , Coloides/química , Ciclohexenos/química , Nanotecnología/métodos , Platino (Metal) , RodioRESUMEN
Rh(0) nanoparticles (ca. 4 nm) dispersed in an ionic liquid (1-n-butyl-3-methylimidazolium tetrafluoroborate) were immobilized within a silica network, prepared by the sol-gel method. The effect of the sol-gel catalyst (acid or base) on the encapsulated ionic liquid and Rh(0) content, on the silica morphology and texture, and on the catalyst alkene hydrogenation activity was investigated. The Rh(0) content in the resulting xerogels (ca. 0.1 wt% Rh/SiO(2)) was shown to be independent of the sol-gel process. However, acidic conditions afforded higher contents of encapsulated ionic liquid and xerogels with larger pore diameters, which in turn might be responsible for the higher catalyst activity in hydrogenation of the alkenes.
RESUMEN
A surface-enhanced Raman spectroscopy (SERS) study of imidazolium ionic liquid stabilized gold(0) nanoparticles (GNPs) furnished previously unknown knowledge about the coordination and stabilization mode of the imidazolium cation. GNPs were prepared by hydrazine reduction of a chloroauric acid solution in 1-triethylene glycol monomethyl ether-3-methylimidazolium methanesulfonate 2 as ether-functionalized room-temperature ionic liquid (RTIL). UV-vis spectroscopy showed the presence of GNP aggregates as absorptions extended to the NIR region. A parallel coordination mode for the imidazolium cation of RTIL 2 on the GNP surface was observed by SERS, which occurred without the simultaneous coordination of the 1-triethylene glycol monomethyl ether-functionality. Instead of this, the ether-functionality was directed away from the GNP surface and acted as steric barrier between the GNPs/GNP aggregates, thus preventing further aggregation. These new insights suggest that the imidazolium cation is responsible for electrosteric stabilization.