RESUMEN
PURPOSE: To examine the microscopic surface features, chemical composition, and thermodynamic profile of seven endodontic sealers (AH Plus, Adseal, MTA-Fillapex, RoekoSeal, GuttaFlow 2, GuttaFlow BioSeal, and EndoRez) exposed to high-temperature changes using an endodontic obturation device. METHODS: The thermal properties were examined using scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Then, six disc-shaped specimens of each sealer were prepared and divided into two groups - a room temperature group and a heat exposure group - for analysis of surface and chemical changes using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). RESULTS: DSC analysis showed that AH Plus had the highest exothermal signal (122.9°C), while TGA analysis showed that MTA-Fillapex was most affected by increased temperature (32.4% mass loss at 230ºC). SEM analysis showed that while AH Plus and GuttaFlow BioSeal maintained their surface integrity after heat exposure, the EDS profiles demonstrated changes in the chemical composition of the sealers after heat exposure for 5 s. High-temperature exposure had a negative impact on the properties of five of the sealers (Adseal, MTA-Fillapex, RoekoSeal, GuttaFlow 2, and EndoRez). CONCLUSION: AH Plus and GuttaFlow BioSeal showed minimal changes upon high-temperature exposure, suggesting their suitability for thermal endodontic obturation techniques.
Asunto(s)
Calor , Materiales de Obturación del Conducto Radicular , Compuestos de Calcio , Resinas Epoxi , Ensayo de Materiales , Obturación del Conducto Radicular , SilicatosRESUMEN
BACKGROUND: One to 6 months after implant placement is a critical time/period responsible for crestal bone loss that may affect implant osseointegration. The study aims to explore the effectiveness of provisional adhesive Maryland-bridge (AMB) applied to prevent marginal bone level (MBL) around implants placed in edentulous crestal bone in posterior area during osseointegration period. METHODS: Healthy, non-smoker patients (N.=18) were included in the study. Titanium implants were placed nonsubmerged (i.e. tissue-level) with cover screws at gingival level in edentulous crestal bone with flapless technique. Nine patients randomly received an AMB, while 9 patients did not receive any AMB. Each AMB remained in place for 3 months and removed before impression. After 3 months abutments were applied, and provisional resin crowns cemented and definitive metal-ceramic crowns were cemented after 2-3 months. Periapical Rx were taken using paralleling technique before and after implant insertion, at 1, 3 months (pre-loading time) and after 6 months (post-loading time). MBL was evaluated in double-blind on scanned periapical radiographs and assessed at mesial and distal side of implants (M-MBL and D-MBL). Area of bone loss on mesial and distal side of implants (Area-M and Area-D) and Cervical Enamel Junction migration of mesial and distal adjacent teeth were also measured (CEJ-M and CEJ-D). Linear regression models were fitted to evaluate the existence of any significant difference. RESULTS: Two drop-out was observed in AMB group. A total of 16 patients completed the study. After 6 months, all implants were safe and free from complications. AMB group showed the most stable MBL at 1-6 months, statistically different from non-AMB and resulted in a reduced crestal bone loss from baseline compared to Non AMB group. Area-M and Area-D were not statistically different between the groups. CEJ-M and CEJ-D were stable in both groups. CONCLUSIONS: The use of Adhesive Maryland Bridge to protect non-submerged post-extractive implants is a safe procedure that prevents bone loss around implants and preserve the 3D architecture of crestal bone ridge.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Dentadura Parcial Fija con Resina Consolidada , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Pérdida de Hueso Alveolar/prevención & control , Implantación Dental Endoósea , Diseño de Prótesis Dental , Estudios de Seguimiento , Humanos , Oseointegración , Resultado del TratamientoRESUMEN
OBJECTIVE: The aim of this study was to evaluate the calcium release, pH, flow, solubility, water absorption, setting and working time of three experimental root canal sealers based on mineral trioxide aggregate (MTA) and two forms of calcium phosphates (CaP). METHODS: The materials were composed of a base and a catalyst pastes mixed in a 1:1. The base paste was made by 60% bismuth oxide and 40% butyl ethylene glycol disalicylate. Three different catalyst pastes were formulated containing 60% MTA or 40% MTA+20% CaP (hydroxyapatite HA or dibasic calcium phosphate dehydrate DCPD), 39% Resimpol 8% and 1% titanium dioxide. MTA Fillapex was used as control. The release of calcium and hydroxyl ions, solubility and water absorption were measured on regular intervals for 28 days. The working time and flow were tested according to ISO 6876:2001 and the setting time according to ASTM C266. The data were analyzed using 1-way ANOVA with Tukey's test (p<.01). RESULTS: All the cements showed basifying activity and released calcium ions. MTA Fillapex showed the highest values of flow (p<.01) and working/setting times (p<.01) and the smallest values of solubility (p<.01) and water absorption (p<.01). SIGNIFICANCE: All experimental materials showed satisfactory physical-chemical properties to be used as endodontic sealers in clinical practice.
Asunto(s)
Compuestos de Aluminio/química , Compuestos de Calcio/química , Glicoles de Etileno/química , Óxidos/química , Materiales de Obturación del Conducto Radicular , Salicilatos/química , Silicatos/química , Calcio/química , Combinación de Medicamentos , Concentración de Iones de Hidrógeno , SolubilidadRESUMEN
PURPOSE: To evaluate the effect of treatment with a bisphosphonate (alendronate) on human dental enamel dissolution in vitro. METHODS: The dissolution of each enamel sample was evaluated by monitoring the calcium release in 0.1M lactic acid solution at pH 4.5 (acidic solution) during dissolution tests, after topical alendronate treatment with 0.1M alendronate solutions at pH 5.0, pH 7.4 and pH 9.0. RESULTS: Data showed that alendronate treatment, both at pH 5.0 and pH 7.4, obtained a statistically significant reduction of enamel demineralization during dissolution test reaction time (45 minutes). The protective effect was not present after treatment at pH 9.
Asunto(s)
Conservadores de la Densidad Ósea/uso terapéutico , Esmalte Dental/efectos de los fármacos , Difosfonatos/uso terapéutico , Esmalte Dental/química , Esmalte Dental/ultraestructura , Humanos , Concentración de Iones de Hidrógeno , Ácido Láctico/efectos adversos , Solubilidad , Soluciones , Desmineralización Dental/inducido químicamente , Desmineralización Dental/prevención & controlRESUMEN
We aimed to compare the apical sealing ability of two experimental retrograde root-filling cements and mineral trioxide aggregate using a fluid filtration method. X-ray diffraction (XRD) and X-ray fluorescence spectrometry (XRF) were used to evaluate structural and qualitative characteristics. Thirty single-rooted extracted teeth were treated, root-end prepared, and obturated using MTA and two experimental cements. Fluid filtration was measured during a 5-minute period after 4, 24, and 48 hours and 1, 2, and 12 weeks. The results were statistically compared by using a two-way analysis of variance (p < 0.05). The marginal adaptation was evaluated by using a SEM replica technique. XRD analyses showed similar patterns. XRF showed lower amounts of SiO(2) and FeO(3) in the experimental cements. All cements showed a reduced fluid flow rate over time. No significant differences were found between the cements. The SEM replica indicated a good marginal adaptation to dentinal walls. Both experimental cements showed suitable properties as retrograde root-filling materials.