RESUMEN

PURPOSE: The Monte Carlo method is an effective tool to simulate and verify PET systems. Furthermore, it can help in the design and optimization of new medical imaging devices and algorithms. In this framework, the goal of this work is to verify the GATE toolkit performance when applied to simulate two Siemens Healthineers PET scanners: a standard axial field-of-view Biograph Vision scanner and the new long axial field-of-view Biograph Vision Quadra scanner. METHODS: The simulation toolkit GATE is based on GEANT4, comprising its main functionalities and a set of domain-specific features in the field of medical physics. To accomplish our purpose, the guidelines described in the NEMA NU 2-2018 protocol are reproduced. Then the simulated results are compared to experimental data available in the literature for both PET scanners. The assessment of the models includes different studies of sensitivity, count rate performances, spatial resolution and image quality. These tests are intended to evaluate the image quality of PET devices. RESULTS: In the spatial resolution test, relative errors lower than 8% are obtained between the experiments and GATE models. The sensitivity is 17.2 cps/kBq (Vision) and 175.9 cps/kBq (Quadra), representing relative differences with the experiment of 6% and 0.3%, respectively. Deviations from peak NECR are less than 9%. In the Image Quality test, the contrast recovery coefficient for hot spheres, with 8 iterations and 5 subsets, ranges between 57-83% for Vision and 54-86% for Quadra. These values represent a maximum deviation between the simulations and the experiments of 10% for the Quadra scanner. In the case of the Vision scanner, the highest difference is observed for the 10 mm sphere (∼38%) due to the higher contrast recovery of the experiment caused by the Gibbs artifact from the use of PSF reconstruction. CONCLUSIONS: The results of the simulations have provided evidence of a good agreement between the experimental data and the results obtained with GATE. Thus, this work supports the capability of this MC toolkit to accurately simulate the models of the Vision and Quadra scanners. This study has laid the basis for further research in this field and has identified several areas that could be explored.

RESUMEN

Herein, a methodology is employed based on the Flory-Rehner equation for estimating the Flory-Huggins interaction parameter (χ12*) of crosslinked elastomer blends. For this purpose, binary elastomer blends containing polybutadiene rubber (BR), styrene-butadiene rubber (SBR) and nitrile-butadiene rubber (NBR), were prepared in a mixing chamber at a temperature below the activation of the crosslinking agent. Swelling tests with benzene were employed to determine the crosslinked fraction, finding that after 20 min of thermal annealing, the BR and NBR were almost completely crosslinked, while the SBR only reached 60%. Additionally, the BR-SBR blend increased by 2-3 times its volume than its pure components; this could be explained based on the crosslink density. From the mechanical tests, a negative deviation from the rule of mixtures was observed, which suggested that the crosslinking was preferably carried out in the phases and not at the interface. Furthermore, tensile tests and swelling fraction (ϕsw) results were employed to determine the average molecular weight between two crosslinking points (Mc), and subsequently χ12*. Calculated χ12* values were slightly higher than those reported in the literature. The calculated thermodynamic parameters for the blends showed positive ΔGmix values and endothermic behavior, suggesting their immiscible nature.

RESUMEN

The present article is a continuation of our previous works on the anomalies in the decay rates and the capacitance measurements inside a modified Faraday cage. Here we present the anomalous variations in the measurements of inductance when a coil is placed inside an interleaving structure of metal and organic material. The fluctuation in the inductance values was found to be in the range - 0.007 to 0.018 mH. Additionally, it was observed that the temperature coefficient which was 0.0062 mH/°C initially jumped to two distinct levels, 0.0095 mH/°C and 0.0145 mH/°C, respectively. A multiple factor analysis of our results revealed a very strong correlation (R2 = 95.2%) between the inductance and the combination of the temperature and the relative humidity both measured inside the cage, next to the inductor.

RESUMEN

Renewable polymers possess the potential to replace monomers from petrochemical sources. The design and development of polymeric materials from sustainable materials are a technological challenge. The main objectives of this study were to study the microstructure of copolymers based on itaconic acid (IA), di-n-butyl itaconate (DBI), and lauryl methacrylate (LMA); and to explore and to evaluate these copolymers as pressure-sensitive adhesives (PSA). The copolymer synthesis was carried out through batch emulsion radical polymerization, an environmentally friendly process. IA was used in a small fixed amount as a functional comonomer, and LMA was selected due to low glass transition temperature (Tg). The structure of synthesized copolymers was studied by FTIR, 1H-NMR, Soxhlet extraction, and molecular weight analyses by GPC. Furthermore, the viscoelastic and thermal properties of copolymer films were characterized by DMA, DSC, and TGA. The single Tg displayed by the poly(DBI-LMA-IA) terpolymers indicates that statistical random composition copolymers were obtained. Moreover, FTIR and NMR spectra confirm the chemical structure and composition. It was found that a cross-linked microstructure and higher molecular weight are observed with an increase of LMA in the feed led. The Tg and modulus (G') of the copolymers film can be tuned with the ratio of DBI:LMA providing a platform for a wide range of applications as a biobased alternative to produce waterborne PSA.

RESUMEN

ABSTRACT Purpose: to describe intervention methodologies implemented in recent years in stuttering children. Methods: a search was performed for empirical articles on interventions in stuttering children aged 2.5 to 7 years. The search was carried out in Embase, WOS, Pubmed, and Scopus, considering articles published between January 2014 and June 2020. Literature Review: 11 articles were selected out of the 1,099 retrieved. Different approaches were observed, of which the Lidcombe program showed the most evidence. Most studies were conducted on English-speaking children and participants were assessed regarding linguistic and non-linguistic aspects. All studies considered parental involvement in the intervention. No investigation took measurements for more than 24 months. Individual interventions predominated. Conclusion: good therapeutic results were found in all reviewed interventions. Research comparing two types of treatments did not find one to be superior to the other.

RESUMEN Objetivo: describir las metodologías de intervención implementadas durante los últimos años en niños con tartamudez Métodos: se realizó la búsqueda de artículos empíricos de tratamiento en niños con tartamudez entre los 2.5 a 7 años. Se consideraron artículos publicados entre enero del año 2014 a junio del año 2020. La búsqueda se realizó en las bases de datos Embase, WOS, Pubmed y Scopus. Junto a lo anterior se realizó un análisis de las referencias de los artículos seleccionados. Revisión de la Literatura: se seleccionaron 11 artículos de 1.099 revisados. Se observaron distintas propuestas de intervención de las cuales el Programa Lidcombe es el que mayor evidencia presenta. La mayoría de las investigaciones fueron realizadas en hablantes de lengua inglesa. Los participantes son evaluados tanto en aspectos lingüísticos como no lingüísticos. Todos consideraron la participación de los padres en la intervención. No hubo investigaciones con mediciones a más de 24 meses. Predomina la modalidad de intervención individual. Conclusión: se evidencian buenos resultados terapéuticos en todas las intervenciones revisadas. En las investigaciones que compararon dos tipos de tratamiento no se observó la superioridad de uno por sobre otro.

RESUMEN

BACKGROUND: Magnetic Resonance Imaging (MRI) scanning can induce psychological effects. No studies have investigated the role of magnetic vestibular stimulation (MVS) in 3TMRI scanner-induced psychological reactions. OBJECTIVE: To assess depersonalization/derealization (DD), state anxiety and motion-perception in a 3TMRI scanner, acutely and long-term. PARTICIPANTS: 48 healthcare professionals and students were included, after preliminary rejection of claustrophobes and neuro-otology and psychiatry assessments. PROCEDURES: Participants completed questionnaires on personal habits, dissociation, anxiety/depression and motion sickness susceptibility. Validated DD and state anxiety questionnaires were administered before and after magnetic exposure twice, entering the bore head and feet first in random order, one week apart. During the following week, dizziness/disorientation was reported daily. One month later, 11 subjects repeated the procedure to assess reproducibility. RESULTS: Considerable individual susceptibility was observed, circa 40% of the subjects reported self-motion perception related to the exposure, with variable increase on DD symptoms. Multivariate analysis showed that DD scores after any exposure were influenced by entering the bore "feet first", motion-perception, and the mean sleep hours/week (MANCOVA, R = 0.58, p = 0.00001). There was no clear effect of scanner exposure on state anxiety, which was related to trait anxiey but not to DD scores. During repeated exposures, about half of all subjects re-entering the scan reported motion-perception, but DD or anxiety symptoms were not consistent. CONCLUSION: Psychological effects during 3TMRI scanning result from multiple, interacting factors, including novelty of the procedure (first-exposure effect), motion-perception due to MVS, head/body orientation, sleeping habits and individual susceptibility. Forewarning subjects of these predisposing factors may increase tolerance to MRI scanning.

Asunto(s)

RESUMEN

Paper recycling has increased in recent years. A principal consequence of this process is the problem of addressing some polymeric components known as stickies. A deep characterization of stickies sampled over one year in a recycled paper industry in México was performed. Based on their chemical structure, an enzymatic assay was performed using lipases. Compounds found in stickies by Fourier-transform infrared spectrometry were poly (butyl-acrylate), dioctyl phthalate, poly (vinyl-acetate), and poly (vinyl-acrylate). Pulp with 4% (w/w) consistency and pH = 6.2 was sampled directly from the mill once macrostickies were removed. Stickies were quantified by counting the tacky macrostructures in the liquid fraction of the pulp using a Neubauer chamber before the paper was made, and they were analyzed with rhodamine dye and a UV lamp. Of the two commercial enzymes evaluated, the best treatment condition used Lipase 30 G (Specialty Enzymes & Biotechnologies Co®, Chino, CA, USA) at a concentration of 0.44 g/L, which decreased 35.59% of stickies. SebOil DG (Specialty Enzymes & Biotechnologies®) showed a stickies reduction of 21.5% when used at a concentration of 0.33 g/L. Stickies in kraft paper processes were actively controlled by the action of lipases, and future research should focus on how this enzyme recognizes its substrate and should apply synthetic biology to improve lipase specificity.

RESUMEN

BACKGROUND: Endothelial dysfunction and subsequent inflammation contribute to the development of vascular cognitive impairment (VCI). Soluble intercellular adhesion molecule-1 (sICAM-1) is upregulated in endothelial dysfunction and promotes an inflammatory response; however, the relationship between sICAM-1 and VCI remains equivocal. OBJECTIVE: To determine whether sICAM-1 contributes to the prediction of VCI. METHODS: Community-dwelling older adults (n = 172) from the "Cohort of Obesity, Sarcopenia and Frailty of Older Mexican Adults" (COSFOMA) study were identified as VCI or controls using standard neuropsychological evaluations and neuroimaging. sICAM-1 was quantified using ELISA, and multivariate logistic regression determined the association between sICAM-1 and VCI. RESULTS: A total of 31 VCI cases were identified. sICAM-1 was higher in VCI (VCI: 450.7 [241.6] ng/mL vs. controls: 296.9 [140.9] ng/mL). sICAM-1 concentrations above the 90th percentile (464.1 ng/mL) were associated with VCI group membership in all models (OR: 6.9, 95% CI: 1.1-42.2). The final saturated model explained 64% of the variance in VCI group membership. CONCLUSION: High concentrations of sICAM-1 are independently associated with VCI group membership. Efforts to further characterize the relationship between indices of endothelial dysfunction and pathological changes to the aging brain should be further pursued.

Asunto(s)

RESUMEN

Loeffler endocarditis is a complication of hypereosinophilic syndrome resulting from eosinophilic infiltration of heart tissue. We report a case of Loeffler endocarditis in which three-dimensional transthoracic and transesophageal echocardiography provided additional information to what was found by two-dimensional transthoracic echocardiography alone. Our case illustrates the usefulness of combined two- and three-dimensional echocardiography in the assessment of Loeffler endocarditis. In addition, a summary of the features of hypereosinophilic syndrome and Loeffler endocarditis is provided in tabular form.

Asunto(s)

RESUMEN

Thermal stability as well as enhanced mechanical properties of poly-lactide (PLA) can increase PLA applications for short-use products. The conjunction of adequate molecular weight (MW) as well as satisfactory thermo-mechanical properties, together, can lead to the achievement of suitable properties. However, PLA is susceptible to thermal degradation and thus an undesired decay of MW and a decrease of its mechanical properties during processing. To avoid this PLA degradation, nanofiller is incorporated as reinforcement to increase its thermo-mechanical properties. There are many papers focusing on filler effects on the thermal stability and mechanical properties of PLA/nanocomposites; however, these investigations lack an explanation of polymer/filler interactions. We propose interactions between PLA and Cloisite30B (C30B) as nanofiller. We also study the effects on the thermal and mechanical properties due to molecular weight decay after exposure to artificial weathering. PLA blank and nanocomposites were subjected to three time treatments (0, 176, and 360 h) of exposure to artificial weathering in order to achieve comparable materials with different MW. MW was acquired by means of Gel Permeation Chromatography (GPC). Thermo-mechanical properties were investigated through Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), Dynamic Mechanical Thermal Analysis (DMTA) and Fourier Transform Infrared Spectroscopy (FTIR).

RESUMEN

In this study, an environmentally friendly method for preparation of chitosan crosslinked membranes with different genipin concentrations (0, 125, 250, and 500 mg/L) was developed. Genipin-crosslinked chitosan membranes were used for the immobilization of fungal pectinesterase (PE). PE was efficiently immobilized in chitosan membranes and used for modification of high-methoxylated pectins into low-methoxylated pectins. The charge density (ζ-potential), infrared spectroscopy (FTIR), and ion-exchange chromatography (IEC) revealed the modification of pectin for immobilized PE in genipin-crosslinked chitosan membrane. The ζ-potential results indicated a decrease of -5.2 mV in the pectin control solution, whereas using the PE immobilized in chitosan and genipin-chitosan membranes, the obtained values were -30.45 mV and -36.38 mV, respectively. Genipin-crosslinked chitosan membrane jointly with the immobilized PE represents an eco-friendly support to prepare tailor-made low-methoxylated lime pectin.

Asunto(s)

RESUMEN

It is difficult to measure the energy spectrum of X-ray tubes due to the pile up effect produced by the high fluence of photons. Using attenuating materials, appropriate detector devices and the Monte Carlo method, primary X-ray spectrum of these devices can be estimated. In this work, a flat panel detector with a PMMA wedge has been used to obtain a dose curve corresponding to certain working conditions of a radiodiagnostic X-ray tube. The relation between the dose curve recorded by the flat panel and the primary X-ray spectrum is defined by a response function. Normally this function can be approximated by a matrix, which can be obtained by means of the Monte Carlo method. Knowing the measured dose curve and the response matrix, the primary X-ray spectrum can be unfolded. However, there are some problems that strongly affect the applicability of this method: i.e. technical features of the flat panel and inherent characteristics of the involved radiation physics (ill-posed problem). Both aspects are analyzed in this work, concluding that the proposed method can be applied with an acceptable accuracy for spectra without characteristic lines, for instance, tungsten anode in the 50-70 kVp range.

Asunto(s)

RESUMEN

Miniemulsion polymerization was used as the synthetic method to produce clay/poly(methyl methacrylate) nanocomposites. Two kinds of interfacial interactions clay-polymer particle were observed by electron microscopy, one where the polymer particles are adhered on the surface of the larger fragments of clay, and another where nanometric fragments of clay are encapsulated by polymer particles. Variations in the glass transition temperature (T(g)) and thermomechanical properties of the matrix, as function of clay content, were observed. In particular, at the highest clay loading (1.0 wt%) depression of T(g) and thermomechanical properties were observed. The increased clay-polymer matrix interfacial area appears to be the conditioning factor that determines such behavior.

Asunto(s)

RESUMEN

In this work, the effect of the incorporation of comonomers containing amine groups on the mechanical and fracture properties of acrylic bone cements was studied. Cements were prepared with either diethyl amino ethyl acrylate (DEAEA), dimethyl amino ethyl methacrylate (DMAEM) or diethyl amino ethyl methacrylate (DEAEM) as comonomer in the liquid phase. It was found that strength and modulus decreased with increasing comonomer content in the bending and compressive tests. It was also observed that fracture toughness (K(IC)) and the critical strain energy release rate (G(IC)) increase with increasing comonomer concentration and are significantly higher compared to the control formulation. The mechanical and fracture properties of cements were also evaluated after soaking the specimens in Simulated Body Fluid (SBF) for 3 and 6 months. It was found that the mechanical properties of cements decreased when the samples were stored in SBF, although the impact strength increased in the first 3 months and then decreased. SEM micrographs were in agreement with the results obtained during mechanical characterization as the increase in toughness was confirmed by the appearance of ductile tearing pattern which is associated with plastic deformation.

Asunto(s)

RESUMEN

An inverse technique has been designed to unfold the x-ray tube spectrum from the measurement of the photons scattered by a target interposed in the path of the beam. A special strategy is necessary to circumvent the ill-conditioning of the forward transport algebraic problem. The proposed method is based on the calculation of both, the forward and adjoint analytical solutions of the Boltzmann transport equation. After testing the method with numerical simulations, a simple prototype built at the Operational Unit of Health Physics of the University of Bologna was used to test the method experimentally. The reconstructed spectrum was validated by comparison with a straightforward measurement of the X-ray beam. The influence of the detector was corrected in both cases using standard unfolding techniques. The method is capable to accurately characterize the intensity distribution of an X-ray tube spectrum, even at low energies where other methods fail.

RESUMEN

In this study, carbon black/polystyrene electrically conductive composites were obtained by suspension polymerization technique. The composite was characterized using transmission electron microscopy, which indicated two outstanding features concerning to the carbon black; first, that the carbon particles were adsorbed onto the surface of the polystyrene particles, similarly as in the Pickering emulsion phenomenon and second, that the primary aggregate structure of the carbon black was significantly affected by the dispersion process. On the other hand, the composite resistivity was in the order of 200 Ωcm, which was attributed to the direct contact of primary carbon black particles (percolation) and not to the tunneling effect. The obtained composite was evaluated as the electrically conductive element in SBR matrix.

RESUMEN

Blastomyces dermatitidis belongs to a group of human pathogenic fungi that exhibit thermal dimorphism. At 22 degrees C, these fungi grow as mold that produce conidia or infectious particles, whereas at 37 degrees C they convert to budding yeast. The ability to switch between these forms is essential for virulence in mammals and may enable these organisms to survive in the soil. To identify genes that regulate this phase transition, we used Agrobacterium tumefaciens to mutagenize B. dermatitidis conidia and screened transformants for defects in morphogenesis. We found that the GATA transcription factor SREB governs multiple fates in B. dermatitidis: phase transition from yeast to mold, cell growth at 22 degrees C, and biosynthesis of siderophores under iron-replete conditions. Insertional and null mutants fail to convert to mold, do not accumulate significant biomass at 22 degrees C, and are unable to suppress siderophore biosynthesis under iron-replete conditions. The defect in morphogenesis in the SREB mutant was independent of exogenous iron concentration, suggesting that SREB promotes the phase transition by altering the expression of genes that are unrelated to siderophore biosynthesis. Using bioinformatic and gene expression analyses, we identified candidate genes with upstream GATA sites whose expression is altered in the null mutant that may be direct or indirect targets of SREB and promote the phase transition. We conclude that SREB functions as a transcription factor that promotes morphogenesis and regulates siderophore biosynthesis. To our knowledge, this is the first gene identified that promotes the conversion from yeast to mold in the dimorphic fungi, and may shed light on environmental persistence of these pathogens.

Asunto(s)

RESUMEN

Control rods are activated by neutron reactions into the reactor. The activation is produced mainly in stainless steel and its impurities. The dose produced by this activity is not important inside the reactor, but it has to be taken into account when the rod is withdrawn from the reactor. Activation reactions produced have been modelled by the MCNP5 code based on the Monte Carlo method. The code gives the number of reactions that can be converted into activity.

Asunto(s)

RESUMEN

The synthesis of multi-walled carbon nanotube/polystyrene composites, with nanotube concentrations of 0.04, 0.08 and 0.16 wt%, was carried out by in situ bulk-suspension polymerization with the assistance of sonication. By using this method both encapsulation and exfoliation of the nanotubes into the polymer host were achieved. Evidence of significant nanotube fragmentation was found by scanning electron microscopy; the cause of such fragmentation was attributed to the induction of strong cavitation due to the application of ultrasound during the synthesis. Infrared spectroscopy showed no evidence of the formation of covalent bonds between the nanotubes and the polystyrene during the process of synthesis. The thermal stability was not improved by the inclusion of the nanotubes, it was attributed to the low nanotube concentrations; however, composites glass transition temperature showed improvements.