RESUMEN
PURPOSE: This study aims to evaluate the applicability of the endoscopy-assisted presigmoid retrolabyrinthine approach, advantages, disadvantages, and the applicability of surgery with pre-op radiological parameters; identify important landmarks; and to reveal their relationships with important structures in the surgical field with objective data. Also, we aim to improve the surgical technique for increasing reachable anatomic structure. METHODS: Mastoid drilling and endoscopy-assisted presigmoid retrolabyrinthine approach were performed and endoscopic instruments were used to obtain the three-dimensional pictures. Computed tomography images were evaluated to correlate to the anatomic data. RESULTS: In terms of pre-operative radiological evaluation of the applicability of the presigmoid approach were investigated with selected radiological parameters. The endoscopy-assisted presigmoid retrolabyrinthine approach applied to cadavers the relationship, distances between important anatomical landmarks, and anatomical structures in the surgical field recorded. The anatomical structures that could reach with the application of the procedure were recorded. The relationship between pre-operative measured radiological parameters and surgical results was evaluated with objective data. Additional combinations to improve this surgical method discussed and the results of our combination were recorded with photographs. CONCLUSION: Although the presigmoid retrolabyrinthine approach has facilitated with the assistance of endoscope, it has observed that there are still some difficulties, and it has been concluded that the radiological parameters are useful in evaluating the applicability of this surgery. It observed that this surgery can be performed more effectively with combinations.
Asunto(s)
Laboratorios , Apófisis Mastoides , Endoscopía/métodos , Endoscopía Gastrointestinal , Humanos , Apófisis Mastoides/diagnóstico por imagen , Apófisis Mastoides/cirugía , Microcirugia/métodos , Procedimientos Neuroquirúrgicos/métodosRESUMEN
AIM: To investigate the incidence, types, morphological and morphometric properties of spina bifida on dry sacral bones. MATERIAL AND METHODS: 110 dry adult sacrums gathered from the bone collections of the Laboratory of the Anatomy Department of Dokuz Eylul University School of Medicine were examined. The parameters analysed were: 1) results of parameters related to the posterior sacral wall; 2) classification and rate of the closure defects; 3) classification of the top sacral vertebrae according to the shape of its superior surface; 4) presence of sacralisation and lumbalisation among sacrums with dorsal wall defects; 5) vertebral levels of apex of the sacral hiatus; and 6) vertebral levels of closure defects of the sacrums. RESULTS: We determined 22/110 (20%) sacrums demonstrated spina bifida. Of these 22 sacrums, 4 (18.18%) showed complete and 18 (81.82%) showed incomplete spina bifida. We noted the coexistence of spina bifida with sacralisation (6/22 [27.27%]) and lumbalisation (5/22 [22.73%]). The types of defects were described and grouped as ?V? (Type 1), inverse ?V? (Type 2), window (Type 3), foramen (hole) (Type 4), sand watch (Type 5), narrow linear (Type 6), wide linear (Type 7), and bridged (Type 8). The shape of upper surfaces of the sacrums with spina bifida was grouped as: cavity (20/22, 90.9%), hump (1/22, 4.5%), and flat (1/22, 4.5%). CONCLUSION: A precise definition of the anatomical variations of sacrums is essential for surgeons, particularly when operating using endoscopic techniques and for anaesthesiologists applying caudal epidural block.
Asunto(s)
Sacro/anomalías , Disrafia Espinal/patología , Adulto , Humanos , Masculino , Disrafia Espinal/epidemiologíaRESUMEN
The endoscopic endonasal transclival approach (EETA) is less invasive than traditional open approaches; however, there is currently limited data on the pre-operative features that may predict success of the EETA. Surgical landmarks and exposure of the EETA and expanded EETA are assessed. We retrospectively measured multiple anatomic features in 154 adult dry skulls, 22 C1 and C2 dry bone vertebrae, and 500 paranasal sinus computed tomography (CT) scans. We also dissected 13 formalin-fixed, silicone-injected adult cadaveric heads. Relevant qualitative and quantitative data were obtained with CT (n = 10) and cadaveric dissection (n = 13). They are expressed as mean (SD), as appropriate and compared with unpaired t tests. Categorical variables were compared with χ2 tests. We determined the prevalence of clival and sphenoid sinus anatomic variations and assessed potential exposure of the craniovertebral region, based on the relative position of the nasal bone tip, posterior point of the hard palate, and their relation to the position of C1 and C2. Depending on anatomic features, EETA should allow visualization of the ventral brainstem. The mean (SD) dimensions of the surgical window for EETA were 43.2 (5.1) × 18.3 (1.1) mm, in the craniocaudad and horizontal dimensions, respectively. The craniocaudad dimension enlarged to 60.2 (4.7) mm with expanded EETA. The EETA allowed satisfactory exposure for odontoid and C1 anterior arch resection (expanded EETA) in all specimens, regardless of the orientation of the palate. The combination of preoperative radiographic assessment and intraoperative considerations allows safe and effective application and facilitate selection of the most appropriate approach.
Asunto(s)
Tronco Encefálico/cirugía , Fosa Craneal Posterior/cirugía , Cirugía Endoscópica por Orificios Naturales/métodos , Adulto , Tronco Encefálico/diagnóstico por imagen , Fosa Craneal Posterior/diagnóstico por imagen , Humanos , Nariz , Seno Esfenoidal/diagnóstico por imagen , Seno Esfenoidal/cirugíaRESUMEN
BACKGROUND: The use of metallic screws for graft fixation during the Latarjet procedure is not devoid of complications. The purpose of the present cadaver study was to determine the initial strength of coracoid graft fixation using suture anchors and compare it to that of the traditional screw fixation of the graft using a fresh frozen human shoulder cadaver model. MATERIALS AND METHODS: Twelve unpaired fresh frozen cadaver shoulders were utilized. In the first group, suture anchor fixation of the graft was used, while 3.75-mm cannulated screws were used in the second group. The specimens were then cyclically loaded from 5 to 150 N at a speed of 0.05 mm/s for 100 cycles. After cyclic loading, each specimen was then loaded at a constant rate of 0.5 mm/s until 7 mm of displacement. Cyclic elongation, peak-to-peak displacement, stiffness and maximum load were measured. RESULTS: There were no significant differences between the traditional screw fixation and fixation using suture anchors in elongation, peak-to-peak displacement, stiffness and maximum load. CONCLUSIONS: In this study, traditional screw fixation and fixation using suture anchors did not significantly affect biomechanical performance in a classic Latarjet procedure.
Asunto(s)
Tornillos Óseos , Trasplante Óseo/instrumentación , Luxación del Hombro/cirugía , Anclas para Sutura , Anciano , Anciano de 80 o más Años , Fenómenos Biomecánicos , Cadáver , Humanos , Persona de Mediana Edad , Falla de PrótesisRESUMEN
AIM: To evaluate anatomical data of the bony structures during exploration of the C1-C2 complex. MATERIAL AND METHODS: This study included six formalin-fixed cadaveric head and neck specimens. Radiological images and anatomical measurements included: C1-C2 distance, bony distance between C1 anterior tubercle-nares and superior incisors, height of C1 anterior arch, and height and width of odontoid articular surface. RESULTS: The mean distance between C1 anterior tubercle-nares and superior incisors on maxilla were 96.16 ± 8.07 mm and 84.14 ± 9.16 mm, respectively. The mean height of C1 anterior arch was 13.89 mm. The meandistance between medial borders of right-left C1 lateral masses was 19.10 ± 1.80 mm. The mean distance between medial border of lateral midline on mass right and left sides were 9.43 ± 0.88 mm and 9.68 ± 0.97 mm, respectively. The mean height of C1 anterior arch at midline was 13.89 ± 2.48 mm, and the mean distance between ventral surface of anterior arch and ventral joint of odontoid at midline was 6.43 ± 1.29 mm. The anteroposterior, horizontal diameters of odontoid on its base were 12.12 ± 0.38 mm, and 11.12 ± 0.94 mm, respectively. The angles of transoral and transnasal approaches to C1 were 32.67 ± 4.59° and 32.00 ± 2.10°, respectively. CONCLUSION: A safe transoral or transnasal odontoidectomy requires accurate measurements and imaging regarding ventral C1-C2 relationships, distances of odontoid, lateral mass and midline.
Asunto(s)
Vértebra Cervical Axis/anatomía & histología , Vértebra Cervical Axis/diagnóstico por imagen , Atlas Cervical/anatomía & histología , Atlas Cervical/diagnóstico por imagen , Femenino , Humanos , Masculino , RadiografíaRESUMEN
OBJECTIVE: To investigate the incidence of the impacted mandibular third molars in dry bones adult mandibles. METHODS: The 198 dry bones adult mandibles gathered from the bone collections in Laboratory of the Anatomy Department of Dokuz Eylul University School of Medicine were macroscopically examined for the presence of impacted mandibular third molars. The genders of the adult bones were unknown. The adult mandibles having impacted third molars were photographed with Canon 400B (55âmm objective). The mandibles having impacted third molars were also radiographically examined with orthopantomography (a dental radiographic technique, kV 60, mA 2.0) in radiology unit of Faculty of Dentistry, Ege University. The impacted teeth were grouped according to their position and degree of impaction. RESULTS: The each of 2 of 198 adult mandibles (2/198; 1.01%) was having an impacted 3rd molar teeth. These 2 molar teeth were belonged to class 1, B and partially buried, vertically oriented. The first impacted 3rd molar teeth was located on the left side of the one mandible and the second one on the right side of the other mandible. CONCLUSION: The present study provides information about impacted mandibular 3rd molar in dry bones.
Asunto(s)
Mandíbula/diagnóstico por imagen , Tercer Molar/diagnóstico por imagen , Diente Impactado , Adulto , Humanos , Incidencia , Radiografía Panorámica , Diente Impactado/diagnóstico por imagen , Diente Impactado/epidemiologíaRESUMEN
OBJECTIVE: Transoral odontoidectomy and ventral C1-2 stabilization are important surgical procedures, performed to decompress ventral spinal cord, and to stabilize craniovertebral junction. These procedures require knowledge regarding surgical anatomy of neurovascular structures ventral to the C1-2 complex. The aim of this study is to evaluate the relationships between neurovascular structures and bony landmarks in ventral atlantoaxial complex. MATERIALS AND METHODS: This study was performed on six formaldehyde fixed cadaveric head and neck specimens. Relevant anatomical parameters, including distances from the midsagittal line to internal carotid arteries (ICA), vertebral arteries (VA), and hypoglossal nerves (HN), were measured using electronic calipers. RESULTS: The mean distance between ICA and midsagittal line was observed as 26.13 mm at the level of axis and 24.67 mm at the level of the atlas. The mean distance between VA and midsagittal line was observed as 15.38 mm at the level of axis and 26.54 mm at the level of the atlas. The mean distance between HN and midsagittal line was observed as 33.27 and 33.58 mm at the level of the atlas and axis, respectively. CONCLUSION: This study confirmed that ICA and HN proceeded ventrally or laterally along the lateral aspect of the C1 lateral mass; therefore, the area located ventrally along the medial components of the C1 lateral mass was the safe zone for anterior surgical approach.
Asunto(s)
Arterias Carótidas/anatomía & histología , Vértebras Cervicales/irrigación sanguínea , Vértebras Cervicales/inervación , Nervio Hipogloso/anatomía & histología , Apófisis Odontoides/irrigación sanguínea , Apófisis Odontoides/inervación , Arteria Vertebral/anatomía & histología , Cadáver , HumanosRESUMEN
INTRODUCTION: The uncinate process (UP) has an important role because of its relationship with the vertebral artery and spinal roots. Degenerative diseases cause osteophyte formation on the UP, leading to radiculopathy, myelopathy and vertebral vascular insufficiency, which may require surgical management. This study aimed to evaluate the morphometry of this region to shed light on the anatomy of the UP. METHODS: Morphometric data was obtained from 13 male formaldehyde-fixed cadavers. Direct measurements were obtained using a metal caliper. Computed tomography (CT) morphometry was performed with the cadavers in the supine position. RESULTS: Direct cadaveric measurements showed that the height of the UP increased from C3 (5.8 ± 1.0 mm) to C7 (6.6 ± 0.5 mm). On CT, the corresponding measurements were 5.9 ± 1.2 mm at C3 and 6.9 ± 0.6 mm at C7. The distance between the left and right apex of the UP from C3 to C7 also increased on both direct cadaveric and CT measurements (C3: 20.8 ± 1.0 mm and C7: 28.1 ± 2.4 mm vs. C3: 23.7 ± 3.4 mm and C7: 29.0 ± 3.0 mm, respectively). On CT, the distance between the UP and superior articular process at the C3 to C7 levels were 9.8 ± 1.7 mm, 7.9 ± 1.8 mm, 7.9 ± 1.6 mm, 7.8 ± 1.3 mm and 8.2 ± 1.7 mm, respectively. CONCLUSION: Direct cadaveric and CT measurements of the UP are useful for preoperative evaluation of the cervical spine and may lead to better surgical outcomes.
Asunto(s)
Vértebras Cervicales/anatomía & histología , Vértebras Cervicales/cirugía , Tomografía Computarizada por Rayos X , Cadáver , Vértebras Cervicales/fisiología , Formaldehído , Humanos , MasculinoRESUMEN
OBJECTIVE: Posterior-to-anterior directed screws are stronger than anterior-to-posterior directed screws for coronoid fracture fixation. Anterior approaches that facilitate direct reduction and fixation of coronoid fractures have been described. The present study was based on the hypothesis that anterior-to-posterior headless screw (Acutrak Mini® 3.5 mm × 26 mm, Acumed, Hillsboro, Oregon, USA) fixation of coronoid fractures would be as strong as posterior-to-anterior 2.7 mm Association for Osteosynthesis (AO) cortical screw fixation. METHODS: This study included 14 ulnas obtained from 14 formalin-preserved adult cadavers. Coronoid type 2 fractures were created and fixed randomly using anterior-to-posterior headless screws (antegrade group) and posterior-to-anterior 2.7 mm AO cortical screws (retrograde group). The experimental constructs were loaded until 2 mm of displacement. Failure load (N), fixation stiffness (Nmm-1), and indentation stiffness were calculated. RESULTS: Failure load was higher in the retrograde screw group (p=0.03), whereas loading stiffness values of the fixation devices and bones did not differ between the 2 fixation groups (p>0.05). CONCLUSION: The present study failed to show that anterior-to-posterior directed headless screw fixation of coronoid fractures could adequately replace posterior-to-anterior placed screw fixation.
Asunto(s)
Tornillos Óseos/clasificación , Fijación Interna de Fracturas/instrumentación , Fracturas Óseas/cirugía , Cúbito/cirugía , Adulto , Fenómenos Biomecánicos , Cadáver , HumanosRESUMEN
It is important to know the morphometric characteristics of the proximal femur. This is necessary to reduce the risk of complications related to surgical procedures performed in the area due to vascular, metabolic, or traumatic causes. It is of importance for achieving the alignment of the prosthesis to be implanted as well. The aim of this study was to evaluate the morphometric characteristics of the proximal femur and to establish a database for making and performing total hip prosthesis. Anteroposterior (AP) pelvic radiographs of 162 cases, with a mean age of 65.6 years, who had undergone unilateral total hip arthroplasty were used in this study. Femoral head diameter (FHD), femoral neck width (FNW), femoral neck length (FNL), femoral neck axis length (FNAL), intertrochanteric line length (ILL), and neck-shaft angle (NSA) were measured on radiographs obtained digitally using setrapacs media. FHD was found to be 48.1 ± 3.7 mm, FNW 35.4 ± 4.2 mm, FNL 30.8 ± 6.1 mm, FNAL 98.6 ± 9.4 mm, ILL 81.1 ± 7.9 mm, and NSA 130.4 ± 5.1° on average. The comparison of the mean values for females and males revealed a statistically significant difference between the FHD, FNW, FNL, FNAL, and ILL (P = 0.000). There was no statistically significant difference in NSA between males and females (P = 0.356). A weak correlation was found between age and parameter values using correlation analysis (r < 0.24, P > 0.05). In morphometric assessment of the proximal femur, taking into consideration regional and sexual differences is of importance for prosthesis design and surgical success.
Asunto(s)
Artroplastia de Reemplazo de Cadera/métodos , Cuello Femoral/diagnóstico por imagen , Fémur/diagnóstico por imagen , Articulación de la Cadera/diagnóstico por imagen , Prótesis de Cadera , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Fémur/anatomía & histología , Cuello Femoral/anatomía & histología , Articulación de la Cadera/anatomía & histología , Humanos , Masculino , Persona de Mediana Edad , Tamaño de los Órganos , Radiografía , Adulto JovenRESUMEN
PURPOSE: The purposes of this study were to define the anatomy of the anterior inferior iliac spine (AIIS) and its relation to the footprint of the rectus femoris tendon and to evaluate on the clinical outcomes after AIIS/subspine decompression. METHODS: The rectus origin was dissected and detached in 11 male cadaveric hips with a mean age of 54.3 ± 14.3 years (range, 33 to 74 years). The proximal-distal and medial-lateral extent of the footprint and its relation to the AIIS and acetabular rim were evaluated, with the 12-o'clock position defined as directly lateral at the insertion of the indirect head of the rectus tendon and the 1- to 6-o'clock positions defined as anterior acetabular positions. To assess the safety and efficacy of subspine decompression for AIIS deformity, clinical correlation of a series of 163 AIIS decompressions (mean age, 27.8 years; age range, 14 to 52 years) performed from January 2011 to January 2012 was completed, and outcome scores, strength deficits, and ruptures were assessed by manual muscle testing and postoperative radiographs. All patients presented with symptomatic FAI with proximal femoral and/or acetabular deformity and type 2 (131 hips) or type 3 (32 hips) AIIS morphology as defined by Hetsroni et al. RESULTS: The mean proximal-distal and medial-lateral distances for the rectus origin footprint were 2.2 ± 0.1 cm (range, 2.1 to 2.4 cm) and 1.6 ± 0.3 cm (range, 1.2 to 2.3 cm), respectively. There was a characteristic bare area at the anteromedial AIIS. On the clock face, the lateral margin (1-o'clock to 1:30 position) and medial margin (2-o'clock to 2:30 position) of the AIIS and the indirect head of the rectus (12 o'clock) were consistent for all specimens. In the clinical series, 163 AIIS decompressions were performed for symptomatic subspine impingement. The mean modified Harris Hip Score was 63.1 points (range, 21 to 90 points) preoperatively compared with 85.3 points (range, 37 to 100 points) at a mean follow-up of 11.1 ± 4.1 months (range, 6 to 24 months) (P < .01). Short Form 12 scores improved significantly from a mean of 70.4 (range, 34 to 93) preoperatively to a mean of 81.3 (range, 31 to 99) postoperatively (P < .01). The mean pain score on a visual analog scale also improved significantly from a mean of 4.9 (range, 0.1 to 8.6) preoperatively to a mean of 1.9 (range, 0 to 7.8) postoperatively (P < .01). The mean alpha angle improved from 61.5° (range, 35° to 90°) preoperatively to 49° (range, 35° to 63°) postoperatively on anteroposterior radiographs and from 71° (range, 45° to 90°) preoperatively to 44.3° (range, 37° to 60°) postoperatively on lateral radiographs. No short- or long-term hip flexion deficits or rectus femoris avulsions were noted with up to 2 years' follow-up. CONCLUSIONS: The origin of the rectus femoris tendon is broad on the AIIS and protective against direct head detachment with subspine decompression. This broad origin and consistent bare area anteromedially on the AIIS can be readily used by surgeons to perform a safe AIIS resection in cases of symptomatic impingement. Arthroscopic subspine decompression in addition to osteoplasty for symptomatic cam- and/or pincer-type FAI deformities can reliably improve outcome scores without significant hip flexion deficits or AIIS/rectus femoris avulsions. CLINICAL RELEVANCE: The direct head of the rectus tendon has a broad insertion on the AIIS, and an area devoid of tendon provides a "safe zone" for subspine decompression in cases of symptomatic AIIS impingement.
Asunto(s)
Artroscopía/métodos , Pinzamiento Femoroacetabular/patología , Pinzamiento Femoroacetabular/cirugía , Articulación de la Cadera/patología , Músculo Cuádriceps/anatomía & histología , Músculo Cuádriceps/cirugía , Adolescente , Adulto , Cadáver , Descompresión Quirúrgica , Femenino , Articulación de la Cadera/anatomía & histología , Articulación de la Cadera/fisiopatología , Articulación de la Cadera/cirugía , Humanos , Masculino , Persona de Mediana Edad , Músculo Cuádriceps/patología , Rango del Movimiento Articular , Adulto JovenRESUMEN
AIM: Obstruction of superior sagittal sinus (SSS) and collateral bridging veins is a well-known reason of postoperative brain edema and brain infarct, however, morphometric anatomic studies done in the light of surgical landmarks aren't sufficient in number. Object of this study is to describe venous structures related to SSS with silicon injected cadaveric models. MATERIAL AND METHODS: This study was on 6 silicon injected cadaveric heads at Anatomy Department. Duramater was removed and veins on parasagittal area were examined. SSS morphology, veins draining into SSS, their size, number and distance were evaluated. RESULTS: Mean vein number draining into SSS is 2.9±1.5 at anterior to coronal suture (CS), between CS and vertex is 3.2±0.8, between vertex and lambdoid suture (LS) is 2.3±0.9, between LS and confluens sinuum 0.3±0.5. There was no statically difference between right and left sides (p=0.140, p > 0.05). Diameter of veins was 2.4±1.0 mm at anterior to CS, 3.0±1.2 mm at between CS and vertex, 2.4±0.7 mm at between vertex and LS, and 2.2±0.5 mm at between LS and confluens sinuum. CONCLUSION: Knowing details of anatomic structures of SSS and venous structures draining into it may protect the patients from many surgical complications. SSS and related structures with surgical landmarks are valuable for neurosurgeons.
Asunto(s)
Venas Cerebrales/anatomía & histología , Seno Sagital Superior/anatomía & histología , Adulto , Cadáver , Venas Cerebrales/patología , Circulación Cerebrovascular/fisiología , Suturas Craneales/cirugía , Humanos , Masculino , Elastómeros de Silicona , Seno Sagital Superior/patologíaRESUMEN
OBJECTIVE: Greater occipital nerve (GON) blockade is an effective method for treatment of occipital neuralgias. Occipital neuralgia or neuropraxis of this region may be seen particularly as a result of compression of the GON. This study shows the relationship between the GON and its external bone landmarks, in order to prevent complications and to perform nerve blockades safely. The study also defines the points where the GON pierces the semispinalis capitis (SSC) and the trapezius, and where the GON passes the obliquus capitis inferior (OCI), and identifies bone landmarks for places where the GON may be entrapped. MATERIALS AND METHODS: In the laboratories of Dokuz Eylül University, Faculty of Medicine Department of Anatomy, 12 GON's belonging to male adult cadavers fixed in formaldehyde were dissected. Colored silicone was injected to all cadavers and then microdissections were performed under a dissection microscope. The lesser occipital nerve, the GON, the greater auricular nerve, and the occipital artery (OA) were dissected. All measurements were made with a 0.1mm sensitive calipometer. RESULTS: The GON's diameter at the point where the GON pierces the SSC was found to be 2.5±0.3 mm. The distance between the point where the GON pierces the SSC and the external occipital protuberance (EOP) was 53.6±5.0 mm. The distance between this point and the midline was 9.0±1.9 mm, the distance between this point and the intermastoid line was 11.5±3.9 mm and the distance between this point and the mastoid process was 65.5±5.9 mm. The distance between the midline and the point where the GON pierces the aponeurosis of trapezius (AT) was 47.9±8.0 mm, the distance between this point and the EOP was 15.1±7.0 mm, the distance between this point and the intermastoid line was 17.1±2.8 mm, and the distance between this point and the mastoid process was 59.4±2.3 mm. We measured the distance between the OA and the intermastoid line to be 8.5±6.1 mm vertically and 32.3±3.9 mm horizontally to the midline. CONCLUSION: In this study, we define the GON's route in the suboccipital and the occipital region where the nerve pierces the SSC and the AT and where blockade or surgery can be performed. These data will help the surgeon and clinician to avoid complications in this region.
Asunto(s)
Bloqueo Nervioso , Procedimientos Neuroquirúrgicos , Nervios Espinales/fisiología , Cadáver , Arterias Cerebrales/anatomía & histología , Descompresión Quirúrgica , Lateralidad Funcional/fisiología , Cabeza/anatomía & histología , Humanos , Masculino , Microdisección , Neuralgia/cirugía , Lóbulo Occipital/anatomía & histología , Nervios Espinales/anatomía & histología , Fijación del TejidoRESUMEN
OBJECTIVE: The sciatic nerve (SN) separates into its branches, the tibial and common fibular nerves, outside the pelvis. However, it may rarely be separated within the pelvis. In such cases, the tibial nerve and the common fibular nerve may leave the pelvis through different routes. These variations may cause nerve compressions under other anatomic structures, resulting in non-discogenic sciatica. The aim of this study was to define the level of the SN exit and of the SN division. MATERIAL AND METHOD: 50 gluteal regions were examined in 25 formalin-fixed adult male cadavers. RESULTS: In 52% of the cases, the SN exited the pelvis as a whole nerve without any division, whereas in 48% a high division was observed. Branches of the SN left the pelvis through the infrapiriform foramen (IP) as two separate nerves In 24%. One branch of the SN left the pelvis through the IP and other through a different route in another 24%. CONCLUSION: The differences in the exit routes of these two nerves are important in clarifying the clinical etiology of nondiscogenic sciatica. These variations require reviewing the piriformis syndrome.
Asunto(s)
Síndromes de Compresión Nerviosa/patología , Nervio Peroneo/anatomía & histología , Ciática/patología , Nervio Tibial/anatomía & histología , Adulto , Cadáver , Disección , Humanos , Masculino , Músculo Esquelético/inervación , Pelvis/inervaciónRESUMEN
OBJECTIVE: L5-S1 instabilities can be fixated using minimally invasive presacral approach. The close relationship between the sacrum and neurovascular as well as intestinal structures may complicate the procedure during this approach. This requires knowledge regarding the normal anatomy of the presacral area to avoid the iatrogenic injuries. The aim of this study was to measure the distance between the sacrum and the structures anterior to it. MATERIALS AND METHODS: The measurements were performed on ten cadavers fixed with formaldehyde and ten MR imaging studies on individuals without any pathology in the presacral area. The distances between the sacrum and the presacral structures (i.e., middle and lateral sacral arteries, sympathetic trunks, internal iliac arteries and veins, and colon/rectum) were measured. RESULTS: Cadaver study showed that the middle sacral artery was located on the right side in 55.0%, on the left side in 31.7%, and on the midline in the 13.3% of cases. The distance between the sacral midline and middle sacral artery was found to be 8.0 +/- 5.4, 9.0 +/- 4.9, 8.7 +/- 6.0, 8.6 +/- 6.4, and 4.7 +/- 5.0 mm at the levels of S1-2, S2-3, S3-4, S4-5, and S5-coccyx, respectively. The distance between the sacral midline and the sympathetic trunk ranged between 22.4 +/- 5.8 and 9.5 +/- 3.2 mm in different levels between S1 and coccygeal level. The study also showed that the distance between the posterior wall of the intestine (colon/rectum) and the ventral surface of the sacrum can be as close as 11.44 +/- 7.69 mm on MR images. CONCLUSION: This study showed that there was close distance between the sacral midline and the structures anterior to it. The close relationships, as well as the potential for anatomical variations, require the use of sacral and presacral imaging before presacral approach.
Asunto(s)
Sacro/anatomía & histología , Sacro/irrigación sanguínea , Sistema Nervioso Simpático/anatomía & histología , Adulto , Cadáver , Femenino , Humanos , Intestinos/anatomía & histología , Masculino , Persona de Mediana Edad , Radiografía , Sacro/diagnóstico por imagenRESUMEN
UNLABELLED: STATING BACKGROUND: The piriformis syndrome is one of the non-discogenics causes of sciatica. It results from the compression of the sciatic nerve (SN) by the piriformis muscle (PM) in the neutral and piriformis stretch test position. The evidence of the increase in pain in the test position requires a detailed anatomical study addressing the changes that occurred in the SN and PM anatomy during the test position. The aim of this study is to examine this relationship morphometrically. MATERIALS AND METHODS: A total of 20 right and left lower limbs of ten adult cadavers were examined. The SN and the PM were made visible. The location of the SN was evaluated with respect to the consistent bony landmarks, including the greater and the lesser trochanter of the femur, the ischial tuberosity, the ischial spine of the hip bone, the posterior inferior iliac spine of the hip bone and the posterior superior iliac spine of the hip bone. The study was done in both neutral and test positions (i.e., 30 degrees adduction 60 degrees flexion and approximately 10 degrees medial rotation position of the hip joint). RESULTS: The width of the greater sciatic notch was 63.09 +/- 13.59 mm. The length of the lower edge of the PM was 95.49 +/- 6.21 mm, and whereas the diameter of the SN where it emerged from the infrapiriforme was 17.00 +/- 3.70 mm, the diameter decreased to 11.03 +/- 2.52 mm at the level of the lesser trochanter of the femur. The SN intersected the PM most commonly in its medial second quarter anatomically. The vertical distance between the medial edge of the SN-PM intersection point and the ischial tuberosity was 85.62 +/- 17.23 and 72.28 +/- 7.56 mm (P < 0.05); the angle between the SN and the transverse plane was 66.36 degrees +/- 6.68 degrees and 71.90 +/- 8.48 degrees (P < 0.05); and the vertical distance between the medial edge of the SN and the apex of the ischial spine of the hip bone was 17.33 +/- 4.89 and 15.84 +/- 4.63 mm (P > 0.05), before and after the test position, respectively. CONCLUSION: This study provides helpful information regarding the course and the location of the SN. The presented morphometric data also revealed that after stretch test position, the infrapiriforme foramen becomes narrower; the SN becomes closer to the ischial spine of the hip bone, and the angle between the SN and the transverse plane increases. This study confirmed that the SN is prone to be trapped in the test position, and diagnosis of this situation requires dynamic MR and MR neurography study.
Asunto(s)
Músculo Esquelético/anatomía & histología , Nervio Ciático/anatomía & histología , Adulto , Cadáver , Humanos , Masculino , Ilustración Médica , Valores de ReferenciaRESUMEN
The far lateral approaches to the lumbar spine require accurate knowledge of regional anatomy. The aim of this study is to evaluate the course of the lumbar nerve roots and their relation to important bony landmarks. Seven adult male cadavers fixed with formaldehyde were used. Morphometric parameters, including the lumbar nerve root diameters, the angle between the nerve roots and the midline, the transverse process length, the inter-transverse process height and width, and the relation between the nerve roots and the transverse processes of the caudal vertebrae were measured. It was observed that the diameter of the nerve roots, and the angle between the nerve roots and the midline, and the distance between the nerve roots and the lateral edge of the superior articular process increased gradually from L1 to L5. The diameter of the nerve root was 4.9+/-0.5mm for L1 and 7.5+/-1.0mm for L5. The midline nerve root angle was 36.1+/-1.6 degrees mm for L1 and 40.4+/-1.4 degrees mm for L5. The distance between the nerve root and the lateral edge of the superior articular process was 6.5+/-1.0mm for L1 and 11.4+/-1.6mm for L5. The nerve roots crossed the transverse processes of the caudal lumbar vertebrae. The nerve roots of L1 and L2 crossed the transverse processes in their first two quarters, the L3 nerve root crossed the transverse process in its second, third or fourth quarters, and the L4 nerve roots crossed the L5 transverse process in its third and fourth quarter or even external to it. Descending toward the lower lumbar vertebrae, the diameter of the lumbar nerve root increases and the nerve roots exit the intervertebral foramen with a larger angle. The special relation between the nerve roots and the caudal vertebra transverse process should be remembered during far lateral lumbar spine approaches.
Asunto(s)
Vértebras Lumbares/anatomía & histología , Raíces Nerviosas Espinales/anatomía & histología , Nervios Espinales/anatomía & histología , Cadáver , Humanos , MasculinoRESUMEN
OBJECTIVE: The current progress in diagnostic and screening methods and surgical equipment technologies facilitates the accessibility to numerous anatomic structures through various interventional approaches. Consequently, the exact knowledge of the anatomic locations of neurovascular structures and their interactions may ensure that the surgical intervention is planned in the most appropriate way and the structures are accessed with the least complication risk during the intervention. MATERIAL AND METHODS: A decapitated and formalin fixated whole-head of a male human cadaver kept for educational and research purposes in the Dokuz Eylul University Department of Anatomy was used in this study. Two separate reservoirs (for the arterial and the venous system) were connected to the Truno System 3 labeled perfusion pump. The reservoirs were filled with blue and red warm tap water. Colored tap water pumped on the right was emptied from the left. Continuous flow of the water in the closed-circuit arterial and venous systems was achieved. As the circulation was continuing, pterional craniotomy was performed and the dura mater was accessed and lifted under the Zeiss dissecting microscope. CONCLUSION: We believe that this model may contribute to neuroanatomy education and provide experience for the safe and ethical performance of surgical interventions during the intraoperative period.
Asunto(s)
Cadáver , Circulación Cerebrovascular/fisiología , Neuroanatomía/educación , Neurocirugia/educación , Encéfalo/anatomía & histología , Arterias Cerebrales/anatomía & histología , Venas Cerebrales/anatomía & histología , Craneotomía , Disección , Duramadre/anatomía & histología , Humanos , Masculino , PerfusiónRESUMEN
The maxilla is the key structure on facial formation and stability. The knowledge about maxillary thickness and dimensions is crucial during facial reconstruction including this bone. In this study, anthropometric measurements of anterior wall of the maxilla on the dry human skulls were aimed. Sixty maxillae of 30 adult dry skulls of West Anatolian people were evaluated. Four vertical lines were drawn between the piriform aperture and lateral border of the bone and six horizontal lines between the infra-orbital margin and the inferior border of the piriform aperture. After establishing the lines, maxillary thicknesses on the intersection points of the vertical and horizontal lines and the lengths of the vertical lines from the infra-orbital margin to alveolar arch were measured by using a fine caliper. It was found that the thickest point of the anterior wall of the maxillae is on the lateral of the infra-orbital margin (5.17 +/- 2.27 mm), and thinnest one is on the inferior of the infra-orbital foramen (0.92 +/- 1.06 mm). The length of the vertical line tangent to piriform aperture (47.66 +/- 3.61 mm) is the longest. The corresponding data of the left and right maxillae were compared by Student's t test. There was no significant difference between both sides. After collecting the data, a thickness map of anterior wall of the maxilla was drawn. This data may be helpful in clinic during osteotomies, bone reconstructions, screw, or other reconstruction apparatus applications on the maxilla.
Asunto(s)
Pesos y Medidas Corporales/métodos , Maxilar/anatomía & histología , Adulto , Antropometría/métodos , Humanos , Cráneo/anatomía & histología , TurquíaRESUMEN
OBJECTIVE: The second segment of the vertebral artery is under the risk of injury during anterior and anterolateral cervical spine procedures. To avoid such a risk, one needs to be familiar with the regional anatomy. The aim of this study was to measure the distance between the vertebral artery and the uncinate process, midline, and the medial side of the longus colli muscle using vertebral artery angiograms at the level of C6, C5, C4, and C3 vertebrae. MATERIALS AND METHODS: In 12 human cadavers, the vertebral arteries were first irrigated with water. Then the arteries were filled with silicon and barium, and finally their angiographic images were obtained. RESULTS: The transverse diameter of the vertebral artery was measured at C6, C5, C4, C3, and C2 level. The values on the left were bigger than the values on the right (p>0.05). The distance between the vertebral artery and the midline decreased from C6 (17.2+/-5.6mm on the right, 17.2+/-2.3mm on the left) to C3 (15.8+/-5.3mm on the right, 13.8+/-2.1mm on the left) (p>0.05). The distance between the apex of the uncinate process and the medial side of the vertebral artery was found to be longer at C4 (2.7+/-1.0 mm on the right, 2.2+/-1.0mm on the left) and C5 (2.5+/-1.1mm on the right, 2.5+/-1.0mm on the left) vertebra levels on the right side (p=0.339 at C4, p=0.862 at C5). The distance between the medial side of the longus colli muscle and the medial side of the vertebral artery was measured as 9.7+/-2.7 mm (9.5+/-2.9 mm on the right, 9.8+/-2.6mm on the left) at C6 level, 9.2+/-2.6mm (8.6+/-2.4mm on the right, 9.8+/-3.1mm on the left) at C5, 9.4+/-1.9 mm (9.2+/-2.1mm on the right, 9.5+/-2.0mm on the left) at C4, and 10.4+/-2.7 mm (10.5+/-3.0mm on the right, 10.1+/-2.6mm on the left) at C3 vertebra level. No significant difference was found between the right and the left (p>0.05). The angle between the vertebral artery and the midline was measured as 4.0+/-1.9 degrees on the right and 2.2+/-1.4 degrees on the left side (p=0.030). CONCLUSION: It was considered that the values obtained could be useful in anterolateral and anterior cervical approaches in terms of evaluating the position of the vertebral artery and its relation to vertebral structures. It is also concluded that the risk of injury in upper subaxial cervical spine is higher than in the lower part of the subaxial cervical spine.