RESUMEN
OBJECTIVES: To study the changes of bacterial flora after a series of preoperative oral disinfection and the postoperative recovery of nerve function of patients with craniovertebral junction disorders who were treated with transoral approach operations. METHODS: This research analyzed 20 cases collected from October 2009 to May 2010. All these patients were with CVJ disorders, including 8 males and 12 females, aged 2 to 66 (38.1 on average), and they were all treated with transoral approach operations. The mucosa samples of the posterior pharyngeal wall were sent for bacteria culture. These samples were collected by sterile cotton swabs at four crucial points, including 3 days before operation/before gargling, 3 days after continuous gargling/after anesthesia intubation on the day of operation, after intraoperative cleaning and washing of the mouth, and after intraoperative iodophor immersion. The microflora was stained by means of smear and further counted after an investigation by microscope. The neural function of patients was evaluated by the ASIA classification and the JOA scores. All patients but two with posterior stabilization performed respectively underwent transoral atlantoaxial reduction plate (TARP) fixation consecutively in the same sitting. A regular reexamination of cervical vertebra with lateral and open mouth X-ray, CT and MRI was conducted after operation to evaluate the reduction of atlantoaxial dislocation, internal fixation position, bone graft fusion, inflammatory lesions and tumor recurrence. RESULTS: This bacteriological research showed that the mucosa of the posterior pharyngeal wall of all the patients was in a sterile state after a series of oral preoperative preparations and intraoperative iodophor disinfection, which was considered as type I incision. The bacterial culture results of the mucosa samples of the posterior pharyngeal wall collected at different time points showed significant differences (χ2 = 42.762, P = 0.000). All the patients had improvement in ASIA, and their neural functions were improved to different levels after operation. There was a significant difference in JOA scores before and after operation (t = 8.677, P = 0.000). Postoperative imaging examination showed that the atlantoaxial screw position was good and firm, and the CVJ disorders were treated appropriately. CONCLUSION: It is safe and effective to cut the posterior pharyngeal muscle layer and implant internal fixation by means of transoral approach.
Asunto(s)
Fusión Vertebral , Masculino , Femenino , Humanos , Fusión Vertebral/efectos adversos , Fusión Vertebral/métodos , Estudios de Seguimiento , Resultado del Tratamiento , Bacterias , YodóforosRESUMEN
Osteoporosis is now a worldwide public health problem that seriously endangers human health, but its causes have not yet been fully clarified. Recently, increasing evidence suggested that polymorphisms in CYP19A1 gene were associated with osteoporosis risk and bone mineral density (BMD), but results remained conflicting. We herein performed a meta-analysis based on evidence currently available from the literature to make a more precise estimation of these relationships. The PubMed, Embase, Cochrane library, CNKI (China National Knowledge Infrastructure), and Wan Fang databases were searched for eligible studies. Odds ratio (OR), mean difference (MD), and 95% confidence interval (CI) were applied to assess the strength of these relationships. A total of 8 studies involving 2632 subjects were included in our meta-analysis. We observed that the AG genotype of CYP19A1 rs700518 was significantly associated with lower BMD values of lumbar spine and femoral neck (AG vs. GG: p = .001 and.01, respectively). However, this polymorphism had no obvious impacts on osteoporosis risk according to current available data. In conclusion, the present meta-analysis showed that CYP19A1 rs700518 polymorphism may be a potential candidate biomarker for osteoporosis screening, early diagnosis, and treatment, which will help improve individualized therapy of osteoporosis patients in clinics.
Asunto(s)
Aromatasa/genética , Densidad Ósea/genética , Osteoporosis/genética , Femenino , Frecuencia de los Genes , Estudios de Asociación Genética , Predisposición Genética a la Enfermedad , Genotipo , Humanos , Masculino , Osteoporosis/epidemiología , Polimorfismo de Nucleótido Simple , Factores de RiesgoRESUMEN
OBJECTIVE: Fracture is a common consequence of osteoporosis and is associated with high morbidity and mortality. Recently, increasing evidence has suggested that polymorphisms in tumor necrosis factor-α (TNF-α) gene were associated with osteoporosis risk and bone mineral density (BMD), but results remain conflicting. We herein performed a meta-analysis based on evidence currently available from the literature to make a more precise estimation of these relationships. METHODS: The PubMed, EMBASE, Cochrane Library, CNKI (China National Knowledge Infrastructure) and Wan Fang databases were searched for eligible studies. Articles meeting the inclusion criteria were comprehensively reviewed and all available data were accumulated. The pooled odds ratios (ORs) or mean differences (MDs) and corresponding 95% confidence intervals (CIs) were applied to assess the strength of the relationships. RESULTS: A total of 15 studies involving 5273 subjects were included in our meta-analysis. The GG genotype of TNF-α G308A was associated with an increased risk of osteoporosis under a mutant model (GG vs GA+AA: OR = 0.63, 95% CI: 0.51-0.77, P < 0.0001, I2 = 31%). Additionally, we also observed a significant association between G308A polymorphism and BMD of lumbar spine (AA vs GG: P = 0.01, I2 = 53%). However, TNF-α T1031C, C857T and C863A polymorphisms had no obvious impacts on osteoporosis risk. CONCLUSIONS: The present meta-analysis demonstrated that TNF-α G308A polymorphism may act as a potential candidate biomarker for screening, diagnosis, and treatment of osteoporosis, which will help improve individualized therapy of osteoporosis patients in clinics.
Asunto(s)
Densidad Ósea/genética , Osteoporosis/genética , Polimorfismo Genético , Factor de Necrosis Tumoral alfa/genética , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Niño , Preescolar , Femenino , Frecuencia de los Genes , Predisposición Genética a la Enfermedad , Heterocigoto , Homocigoto , Humanos , Masculino , Persona de Mediana Edad , Osteoporosis/diagnóstico , Osteoporosis/fisiopatología , Fenotipo , Medición de Riesgo , Factores de Riesgo , Adulto JovenRESUMEN
BACKGROUND: Histamine H2 antagonists (H2RAs) have long been suggested to have beneficial effects on congestive heart failure (CHF). However, full agreement about the cardioprotective effects of H2RAs is still not reached yet. Therefore, this study aims to clarify the effects of H2RAs on myocardial function in CHF patients by meta-analysis. METHODS: Electronic databases including PubMed, Embase, and Cochrane Library were retrieved. Randomized controlled trials comparing the cardiac effects of H2RAs and placebo or other medicines were collected. Pooled mean differences (MDs) with 95% confidence intervals (CIs) were calculated and meta-analysis was performed using RevMan 5.3 software. RESULTS: A total of 10 studies (472 participants) were included in this meta-analysis. H2RAs exhibited significant negative inotropic and chronotropic effects to reduce heart rate (MD: -3.90; 95%CI: -7.07 to -0.73, Pâ=â.02). Furthermore, although H2RAs did not affect the blood pressure in health volunteers, they significantly decreased the blood pressure of CHF patients. Additionally, H2RAs were also associated with significant increase in pre-ejection period and the ratio of pre-ejection period to left ventricular ejection time. CONCLUSION: In summary, these findings showed that H2RAs exerted negative inotropic and chronotropic effects to reduce heart rate and blood pressure, which, similar to beta-adrenergic receptor blockers, might decrease myocardial oxygen demand and eventually result in improvement of CHF symptoms. These data provided further evidence for the effect of H2RAs on cardiac function and novel potential strategy for treatment of CHF.
Asunto(s)
Cardiotónicos/uso terapéutico , Insuficiencia Cardíaca/tratamiento farmacológico , Antagonistas de los Receptores H2 de la Histamina/uso terapéutico , Corazón/efectos de los fármacos , Corazón/fisiopatología , Insuficiencia Cardíaca/fisiopatología , Humanos , Ensayos Clínicos Controlados Aleatorios como AsuntoRESUMEN
Failure of fixation caused by loosening of pedicle screws in osteoporosis is a problem in spinal surgery. We compared the in vivo fixation strength between pedicle screws treated with microarc oxidation (MAO) and untreated screws in an osteoporotic model of ovariectomized sheep. The MAO treated and untreated screws were placed in lumbar vertebral bodies. After 3 months of implantation, biomechanical tests, micro-CT analysis, and histological observations were conducted to examine the performance of the two groups. At time 0, no significant difference was found between the two groups in biomechanical tests (p > 0.05); 3 months later, higher pull-out strength and load with less displacement were detected in the MAO-treated group (p < 0.05). Micro-CT analysis showed that the tissue mineral density, bone volume fraction, trabecular thickness, and trabecular number in the MAO-treated group were all higher than those in untreated group (p < 0.05), and trabecular spacing was smaller (p < 0.05). Histologically, the bone-implant interface in the MAO-treated group was better than that in untreated group (p < 0.05). In conclusion, pedicle screws with a bioactive surface treated by MAO can improve screw fixation strength in osteoporotic spines in sheep.
Asunto(s)
Tornillos Óseos , Fijadores Internos , Osteoporosis/cirugía , Animales , Fenómenos Biomecánicos , Femenino , Fijadores Internos/normas , Vértebras Lumbares/cirugía , Oseointegración , Osteoporosis/diagnóstico por imagen , Oxidación-Reducción , Oveja Doméstica , Columna Vertebral/diagnóstico por imagen , Propiedades de Superficie , Microtomografía por Rayos XRESUMEN
STUDY DESIGN: Low elastic modulus expandable pedicle screw (L-EPS) was inserted into osteoporotic sheep. Biomechanical tests, micro-CT analysis and histologic observation were performed. OBJECTIVE: To find out whether the L-EPS can further improve fixation strength compared to the expandable pedicle screws (EPS) in osteoporotic sheep spine. The screw-bone interface is also detected by micro-computed tomography (CT) and histologic techniques. SUMMARY OF BACKGROUND DATA: There are some studies on EPS in vivo; however, no earlier study has focused on the elastic modulus of EPS, especially in osteoporosis. METHODS: Twelve months after ovariectomy, bilateral pedicles of lumbar vertebrae (L1 to L5) of 4 female sheep were fixed with EPSs. The L-EPS and EPS were randomly placed into each pedicle and then were expanded. Six months later, the sheep were sacrificed and biomechanical tests, micro-CT analysis, and histologic observation were conducted on the isolated specimen vertebrae. RESULTS: Twelve months after ovariectomy, animal model of osteoporosis was established successfully. The axial pull-out strength in L-EPS group was significantly enhanced compared with that in the EPS group (P < 0.05). Micro-CT reconstruction and analysis showed that there was more bone around the L-EPS group compared with those in EPS group (P < 0.05), meanwhile the more homogeneous bone formation distribution around the screws was found in the L-EPS group. Histologic observation showed that newly formed bone extended along the expandable fissures and grew into the center of EPS; meanwhile, the more direct contact and the less fibrous tissue on the screw-bone interface were observed in the L-EPS group. CONCLUSIONS: The L-EPS can further improve the biomechanical fixation strength of EPS in the osteoporotic sheep. The screw elastic matching with surrounding bone is helpful to distribute stress uniformly, relieve the stress shielding effect, and strengthen the screw-bone interface. Although the experience with the L-EPS is very limited and preliminary, results to date indicate that it is of value in treating patients with osteoporosis and warrants further study.
Asunto(s)
Tornillos Óseos , Vértebras Lumbares/cirugía , Procedimientos Ortopédicos/instrumentación , Osteoporosis/cirugía , Animales , Fenómenos Biomecánicos , Femenino , Vértebras Lumbares/diagnóstico por imagen , Osteoporosis/diagnóstico por imagen , Radiografía , OvinosRESUMEN
INTRODUCTION: Transpedicular fixation can be challenging in the osteoporotic spine. Expansive pedicle screw (EPS) and polymethylmethacrylate-augmented pedicle screw (PMMA-PS) were both used to increase screw stability. However, there are a little or no biomechanical comparisons of EPS and PMMA-PS, especially in primary spinal surgery in osteoporotic vertebrae. The purpose of this study was to compare the stability of EPS and PMMA-PS in primary spinal surgery. MATERIALS AND METHODS: Fifteen osteoporotic vertebrae were randomly divided into three groups. The conventional pedicle screw (CPS) was inserted in CPS group, the pilot hole was filled with PMMA followed by CPS insertion in PMMA-PS group, and EPS was inserted in EPS group. Twenty-four hours later, X-ray and CT examination and biomechanical tests were performed to all vertebrae. RESULTS: In PMMA-PS group, PMMA existed in bone tissue around the CPS in both vertebral body and pedicle of vertebral arch, and PMMA surrounding the screw formed a spindle-shaped structure in vertebral body. In EPS group, anterior part of EPS presented an obvious expansion in vertebral body and formed a clawlike structure. Screw stabilities in PMMA-PS and EPS groups were significantly enhanced compared with those in CPS group (P < 0.05). However, there was no significant difference between PMMA-PS and EPS groups (P > 0.05). CONCLUSION: Expansive pedicle screw can markedly enhance screw stability with a similar effect to the traditional method of screw augmentation with PMMA in primary surgery in osteoporotic vertebrae. In addition, EPS can overcome pedicle fracture, leakage and compression caused by lager screw and augmentation with PMMA. We propose that EPS is an effective, safe and easy method and has a great application potential in augmentation of screw stability in osteoporosis in clinic.
Asunto(s)
Tornillos Óseos , Fijación Interna de Fracturas/instrumentación , Vértebras Lumbares/lesiones , Osteoporosis/complicaciones , Fracturas de la Columna Vertebral/cirugía , Anciano , Fenómenos Biomecánicos , Femenino , Fijación Interna de Fracturas/métodos , Humanos , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Masculino , Persona de Mediana Edad , Polimetil Metacrilato , Radiografía , Fracturas de la Columna Vertebral/etiologíaRESUMEN
STUDY DESIGN: Augmentation of pedicle screws with calcium sulfate cement (CSC) was performed in osteoporotic sheep. Biomechanical tests, micro-computed tomography (CT) analysis, and histological observation were performed. OBJECTIVE: To investigate the long-term biomechanical performance of pedicle screws augmented with CSC in vivo and evaluated the screw-bone interfacial bonding with micro-CT and histological techniques. SUMMARY OF BACKGROUND DATA: There is little information on the long-term biomechanical performance and screw-bone interfacial bonding of pedicle screws augmented with CSC in osteoporosis in vivo. METHODS: Twelve months after ovariectomy, bilateral pedicles of lumbar vertebrae (L1 to L5) of 6 female sheep were fixed with pedicle screws. One pedicle of each vertebral body was treated with a screw augmented with CSC (CSC group) and the contralateral pedicle was treated with a screw without any augmentation (control group). Three months later, the sheep were killed and biomechanical tests, micro-CT analysis, and histological observation were conducted on the isolated specimen vertebrae. RESULTS: Twelve months after ovariectomy, animal model of osteoporosis was established successfully. Both the axial and vertical stabilities of the pedicle screws in CSC group were significantly enhanced compared with those in the control group (P<0.05). Micro-CT reconstruction and analysis showed that there were more bone trabeculae around the screws in CSC group compared with those in control group (P<0.05), and the bone trabeculae were significantly denser than those in control group (P<0.05). Histological observation showed that CSC was completely degradated and bone trabeculae around the screws in CSC group were more and denser than that in the control group. Bone trabeculae held the screws tightly without any interspaces between screw and bone, which formed strong bonding between bone and screw. CONCLUSIONS: CSC can significantly improve screw-bone interfacial bonding and strengthen the long-term stability of pedicle screws in osteoporotic sheep. Augmentation with CSC may be a potentially useful method to increase the stability of pedicle screws in patients with osteoporosis.
Asunto(s)
Cementos para Huesos/uso terapéutico , Tornillos Óseos , Sulfato de Calcio/administración & dosificación , Vértebras Lumbares/cirugía , Osteoporosis/cirugía , Animales , Fenómenos Biomecánicos/fisiología , Cementos para Huesos/química , Tornillos Óseos/normas , Modelos Animales de Enfermedad , Femenino , Vértebras Lumbares/fisiología , Osteoporosis/fisiopatología , OvinosRESUMEN
STUDY DESIGN: Partial screw augmentation was carried out by the injection of polymethylmethacrylate (PMMA) through the novel tap into the bone tissue in sheep vertebrae in vitro. Biomechanical tests and microcomputerized tomography analysis were done. OBJECTIVE: To evaluate the stability of the screw and the interface between the bone and the screw in partial screw augmentation. SUMMARY OF BACKGROUND DATA: Augmentation of the pedicle screw with PMMA improves screw stability significantly. However, it results in the full envelopment of the screw by PMMA and the formation of a full "screw-PMMA-bone" interface, which may increase the difficulties in screw removal. Therefore, it is urgent to develop a novel method to augment screw fixation, which avoids full wrapping of PMMA around the screw and facilitates screw removal. We designed a novel tap with an inner hollow and the multiple lateral apertures. METHODS: A total of 78 fresh adult sheep lumbar vertebrae were randomly divided into 3 groups. No screw augmentation was performed in the control group. The pilot hole was filled with PMMA in the full screw augmentation group, whereas PMMA was injected through the tap into the bone tissue in the partial screw augmentation group. Pedicle screws were ultimately inserted into all the holes. Axial pullout tests, cyclic bending tests, and microcomputerized tomography analysis were carried out 24 hours after screw fixation. RESULTS: Both partial screw augmentation and full screw augmentation caused significant increase in pedicle screw stability compared with the control group in both the axial pullout tests and the cyclic bending resistance tests. Partial screw augmentation resulted in the formation of a partial "screw-bone" interface and a partial screw-PMMA-bone interface, which seems like 3 anchors or roots extending and fixing in the bone tissue in a cross section of the interface. It was obviously different from the complete screw-PMMA-bone interface with a complete PMMA mantle around the screw in the full screw augmentation group. CONCLUSIONS: Our proof-of-concept study showed that partial screw augmentation could enhance pedicle screw fixation strength, avoided the full surrounding of the PMMA around the screw, and generated a partial screw-PMMA-bone and a partial screw-bone interface. Partial screw augmentation may be a potential method to augment pedicle screw stability.
Asunto(s)
Cementos para Huesos/uso terapéutico , Fijadores Internos/normas , Polimetil Metacrilato/uso terapéutico , Falla de Prótesis/efectos adversos , Fusión Vertebral/instrumentación , Columna Vertebral/cirugía , Animales , Fenómenos Biomecánicos/fisiología , Técnicas In Vitro , Modelos Animales , Ovinos , Fusión Vertebral/métodosRESUMEN
STUDY DESIGN: An in-vitro cadaver-based measurement using microcomputed tomography. OBJECTIVES: To evaluate the safety of removal of expandable pedicle screws (EPSs) in human vertebral bodies after a long (6 mo) insertion time. SUMMARY OF BACKGROUND DATA: Transpedicular fixation is commonly used for posterior fixation of the spine. Osteoporotic patients are in high risk of internal fixation failure. EPS is an available device for increasing transpedical fixation in the osteoporotic spine. However, it is unclear that how much the diameter of the expanding screw tip increases in the human vertebral body, and no reports have assessed the potential for fracture of the pedicle when the EPS is removed. Therefore, the safety of removal of EPS needs to be evaluated. METHODS: In this study, 6.50 mm EPSs were inserted into cadaveric lumbar vertebrae. The maximum diameters of expansion, the maximum diameters of the EPS trajectories, and the diameters of the EPS trajectories in the pedicles were measured using microcomputed tomography imaging and 3-dimensional reconstruction. Regions of interest of the same size adjacent to the EPS in the pedicle and in the vertebral body were reconstructed and analyzed using the same thresholds (1000). Bone volume divided by total volume (BV/TV) in these regions of interest was determined. RESULTS: The maximum diameter of expansion of the EPSs in the vertebral body was 7.63 mm, a 17.38% increase from the original diameter. The maximum diameter of the EPS trajectory and the diameter of the EPS trajectory in the pedicle were 7.56 mm and 7.09 mm, respectively, increases of 16.31% and 9.08%. The differences were statistically significant (P < 0.05). In the pedicle, there was a negative correlation between the diameter of the EPS trajectory and the BV/TV along the EPS trajectory (r = -0.88; P = 0.002). In the vertebral body, a negative correlation occurred between the maximum expansion diameter of the EPS and vertebral BV/TV (r = -0.85; P = 0.004). CONCLUSIONS: The EPS could be reliably removed after expansion without fracturing the pedicle. Furthermore, the BV/TV had an important influence on the degree of expansion of EPS and whether or not pedicle fracture occurs.
Asunto(s)
Tornillos Óseos/normas , Fijadores Internos/normas , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Fusión Vertebral/instrumentación , Fusión Vertebral/métodos , Tomografía Computarizada por Rayos X/métodos , Anciano , Cadáver , Humanos , Masculino , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/prevención & controlRESUMEN
Osteoporotic/osteopenia fractures occur most frequently in trabeculae-rich skeletal sites. The purpose of this study was to use a high-resolution micro-computed tomography (micro-CT) and dual energy X-ray absorptionmeter (DEXA) to investigate the changes in micro-architecture and bone mineral density (BMD) in a sheep model resulted from ovariectomy (OVX). Biomechanical tests were performed to evaluate the strength of the trabecular bone. Twenty adult sheeps were randomly divided into three groups: sham group (n=8), group 1 (n=4) and group 2 (n=8). In groups 1 and 2, all sheep were ovariectomized (OVX); in the sham group, the ovaries were located and the oviducts were ligated. In all animals, BMD for lumbar spine was obtained during the surgical procedure. BMD at the spine, femoral neck and femoral condyle was determined 6 months (group 1) and 12 months (group 2) post-OVX. Lumbar spines and femora were obtained and underwent BMD scan, micro-CT analysis. Compressive mechanical properties were determined from biopsies of vertebral bodies and femoral condyles. BMD, micro-architectural parameters and mechanical properties of cancellous bone did not decrease significantly at 6 months post-OVX. Twelve months after OVX, BMD, micro-architectural parameters and mechanical properties decreased significantly. The results of linear regression analyses showed that trabecular thickness (Tb.Th) (r=0.945, R2=0.886) and bone volume fraction (BV/TV) (r=0.783, R2=0.586) had strong (R2>0.5) correlation to compression stress. In OVX sheep, changes in the structural parameters of trabecular bone are comparable to the human situation during osteoporosis was induced. The sheep model presented seems to meet the criteria for an osteopenia model for fracture treatment with respect to morphometric and mechanical properties. But the duration of OVX must be longer than 12 months to ensure the animal model can be established successfully.
Asunto(s)
Densidad Ósea , Huesos/diagnóstico por imagen , Huesos/fisiopatología , Modelos Animales de Enfermedad , Osteoporosis/diagnóstico por imagen , Osteoporosis/fisiopatología , Ovariectomía , Animales , Fenómenos Biomecánicos , Fuerza Compresiva , Módulo de Elasticidad , Femenino , Humanos , Radiografía , Ovinos , Estrés MecánicoRESUMEN
OBJECTIVE: To investigate the properties of screw-bone interface of expansive pedicle screw (EPS) in osteoporotic sheep by micro-CT and histological observation. METHODS: Six female sheep with bilateral ovariectomy-induced osteoporosis were employed in this experiment. After EPS insertion in each femoral condyle, the sheep were randomly divided into two groups: 3 sheep were bred for 3 months (Group A), while the other 3 were bred for 6 months (Group B). After the animals being killed, the femoral condyles with EPS were obtained, which were three-dimensionally-imaged and reconstructed by micro-CT. Histological evaluation was made thereafter. RESULTS: The trabecular microstructure was denser at the screw-bone interface than in the distant parts in expansive section, especially within the spiral marking. In the non-expansive section, however, there was no significant difference between the interface and the distant parts. The regions of interest (ROI) adjacent to EPS were reconstructed and analyzed by micro-CT with the same thresholds. The three-dimensional (3-D) parameters, including tissue mineral density (TMD), bone volume fraction (BVF, BV/TV), bone surface/bone volume (BS/BV) ratio, trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp), were significantly better in expansive sections than non-expansive sections (P less than 0.05). Histologically, newly-formed bony trabeculae crawled along the expansive fissures and into the center of EPS. The newly-formed bones, as well as the bones at the bone-screw interface, closely contacted with the EPS and constructed four compartments. CONCLUSIONS: The findings of the current study, based on micro-CT and histological evaluation, suggest that EPS can significantly provide stabilization in osteoporotic cancellous bones.
Asunto(s)
Tornillos Óseos , Huesos/diagnóstico por imagen , Huesos/patología , Osteoporosis/diagnóstico por imagen , Osteoporosis/patología , Tomografía Computarizada por Rayos X , Animales , Femenino , OvinosRESUMEN
OBJECTIVE: To investigate the properties of screw-bone interface of expansive pedicle screw (EPS) in osteoporotic sheep using micro-CT and histology. METHODS: Six female sheep with bilateral ovariectomy-induced osteoporosis were employed in this experiment and were randomly assigned into 2 groups: A and B. After EPS insertion in each femoral condyles, sheep in group A were bred for 3 months, while those in group B 6 months. Femoral condyles with EPS were 3D-imaged and reconstructed by micro-CT. Histology was evaluated thereafter. RESULTS: The trabecular microstructure was denser at the screw-bone interface than in the distant parts in expansive section, especially within spiral marking. In the non-expansive section, however, there was no significant difference between the interface and the distant parts. The regions of interest (ROI) adjacent to EPS were reconstructed and analyzed by micro-CT using the same thresholds. The 3D-parameters generated, including tissue mineral density (TMD), bone volume fraction (BVF, BV/TV), bone surface/bone volume (BS/BV) ratio, trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp), were significantly better in expansive than in non-expansive sections (P < 0.05). Histologically, newly formed bone trabeculae crawled along the expansive fissures and into the center of EPS. The newly formed bones, as well as the bone at the bone-screw interface, closely contacted the EPS and constructed four compartments. CONCLUSIONS: Based on micro-CT and histological evaluation, the study suggest that EPS can significantly provide stabilization in osteoporotic cancellous bone.