RESUMEN

Purpose: This study examined the influence of metal artifact reduction (MAR), the application of sharpening filters, and their combination on the diagnosis of horizontal root fracture (HRF) in teeth adjacent to a zirconia implant on cone-beam computed tomography (CBCT) examinations. Materials and Methods: Nineteen single-rooted teeth (9 with HRF and 10 without) were individually positioned in the right central incisor socket of a dry human maxilla. A zirconia implant was placed adjacent to each tooth. Imaging was performed using an OP300 Maxio CBCT (Instrumentarium, Tuusula, Finland) unit with the following settings: a current of 8 mA, both MAR modes (enabled and disabled), a 5×5 cm field of view, a voxel size of 0.085 mm, and a peak kilovoltage of 90 kVp. Four oral and maxillofacial radiologists independently evaluated the CBCT scans under both MAR conditions and across 3 levels of sharpening filter application (none, Sharpen 1×, and Sharpen 2×). Diagnostic metrics were calculated and compared using 2-way analysis of variance (α=5%). The weighted kappa test was used to assess intra- and inter-examiner reliability in the diagnosis of HRF. Results: MAR tool activation, sharpening filter use, and their combination did not significantly impact the area under the receiver operating characteristic curve, sensitivity, or specificity of HRF diagnosis (P>0.05). Intra- and inter-examiner agreement ranged from fair to substantial. Conclusion: The diagnosis of HRF in a tooth adjacent to a zirconia implant is not affected by the activation of MAR, the application of a sharpening filter, or the combination of these tools.

RESUMEN

OBJECTIVES: To evaluate the influence of multiplanar reconstruction thickness on the detection of peri-implant bone defects with a standalone zirconia implant and compare it to when another implant is in the vicinity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Five dry human mandibles were used to create twenty implant sites in the second premolar and first molar regions. The OP300 Maxio was used to acquire CBCT images (90 kVp, 6.3 mA, 5 × 5 cm FOV, and 0.125 mm3 voxel size) before and after creating 3 mm peri-implant bone defects in the buccal aspect of the premolar region. Half of the scans featured a single zirconia implant in the premolar region, while the others had two implants in the premolar and molar regions. Three reconstruction thicknesses (0.125 mm, 1 mm, and 2 mm) were considered for the multiplanar reconstruction analyses. Five oral and maxillofacial radiologists assessed the detection of peri-implant bone defects using a 5-point scale. Diagnostic parameters were calculated and compared using Two-way ANOVA (α = .05). RESULTS: The studied factors showed no significant influence on the diagnosis of peri-implant bone defects (p > .05). Diagnostic performance was notably higher with a single implant, especially with a 2-mm reconstruction thickness (AUC = 0.88, sensitivity = 0.68, specificity = 0.94). Although the differences were not statistically significant, the results were more modest when two implants were present (AUC = 0.80, sensitivity = 0.58, specificity = 0.82). CONCLUSIONS: The presence of an adjacent zirconia implant and variations in reconstruction thickness did not influence the detection of 3 mm buccal peri-implant bone defects on CBCT images.

RESUMEN

Purpose: This study examined the influence of a metal artifact reduction (MAR) tool, sharpening filters, and their combination on the diagnosis of vertical root fracture (VRF) in teeth with metallic posts using cone-beam computed tomography (CBCT). Materials and Methods: Twenty single-rooted human premolars - 9 with VRF and 11 without - were individually placed in a human mandible. A metallic post composed of a cobalt-chromium alloy was inserted into the root canal of each tooth. CBCT scans were then acquired under the following parameters: 8 mA, a 5×5 cm field of view, a voxel size of 0.085 mm, 90 kVp, and with MAR either enabled or disabled. Five oral and maxillofacial radiologists independently evaluated the CBCT exams under each MAR mode and across 3 sharpening filter conditions: no filter, Sharpen 1×, and Sharpen 2×. The diagnostic performance was quantified by the area under the receiver operating characteristic curve (AUC), sensitivity, and specificity. These metrics were compared using 2-way analysis of variance with a significance level of α=5%. Intra- and inter-examiner agreement were assessed using the weighted kappa test. Results: Neither MAR nor the application of sharpening filters significantly impacted AUC or specificity (P>0.05). However, sensitivity increased when MAR was combined with Sharpen 1× and Sharpen 2× (P=0.015). The intra-examiner agreement ranged from fair to substantial (0.34-0.66), while the inter-examiner agreement ranged from fair to moderate (0.27-0.41). Conclusion: MAR in conjunction with sharpening filters improved VRF detection; therefore, their combined use is recommended in cases of suspected VRF.

RESUMEN

This study aimed to evaluate the influence of the metal post composition, tooth location in the dental arch, and metal artifact reduction (MAR) on vertical root fracture (VRF) diagnosis in cone beam computed tomography (CBCT). Twenty-two unirradicular premolars (12 sound and 10 fractured) and two alveolar sockets of a mandible (anterior and posterior regions) composed the sample. CBCT scans of each tooth with a metal post placed into the root canal-silver-palladium (Ag-Pd), cobalt-chromium (Co-Cr), or nickel-chromium (Ni-Cr)-were individually acquired for each mandibular region, and two conditions of MAR, using a OP300 device (Instrumentarium, Finland). Images were assessed by five evaluators independently for VRF detection. Diagnostic values were calculated and compared among all groups using multi-way ANOVA with Tukey post hoc test to investigate the effect of post material, anatomical region, and MAR on VRF diagnosis (α = 0.05). Values of area under the receiver operating curve and specificity were not influenced by the studied factors (p > 0.05). Sensitivity was influenced by the MAR in both mandibular regions (p < 0.05). In the anterior region, sensitivity values increased when the MAR was enabled, regardless of the metal post material (p < 0.05). Similar behavior was noticed in the posterior region for Ni-Cr (p < 0.05) but not for Ag-Pd and Co-Cr posts (p > 0.05). The MAR improved the sensitivity in VRF diagnosis for all tested metal posts in the mandibular anterior region and for the Ni-Cr post in the mandibular posterior region. Therefore, for images obtained in the OP300 CBCT device, activation of the MAR is suggested in these cases.

Asunto(s)

RESUMEN

This study aimed to assess the influence of the file format on the image quality parameters (image noise, brightness, and uniformity) of periapical radiographs acquired with different digital systems. Radiographic images of an acrylic phantom were acquired with two digital systems - Digora Toto and Express, and exported into five different file formats - TIFF, BMP, DICOM, PNG, and JPEG. Image noise, image brightness (mean of gray values), and image uniformity (standard deviation of gray values) were evaluated in all images. A two-way analysis of variance with Tukey's test as a post-hoc test was used to compare the results, considering the file formats and radiographic systems as the studied factors. A significance level of 5% was adopted for all analyses. The DICOM image file format presented lower image noise, higher brightness (higher mean gray values), and greater image uniformity (p<0.001) than the other file formats, which did not differ from each other for both digital radiography systems (p>0.05). The Express system revealed lower image noise and greater image uniformity than the Digora Toto system regardless of the image file format (p<0.001). Moreover, the Express showed higher brightness than the Digora Toto for all image file formats (p<0.001), except for the DICOM image file format, which did not significantly differ between the digital radiography systems tested (p>0.05). The DICOM image file format showed lower image noise, higher brightness, and greater image uniformity than the other file formats (TIFF, BMP, PNG, and JPEG) in both digital radiography systems tested.

Asunto(s)

RESUMEN

OBJECTIVES: To compare the multilayer panoramic radiography (MPAN) and conventional panoramic radiography (CPAN) in the evaluation of mandibular third molars using cone-beam computed tomography (CBCT) as a reference. METHODS: CPAN, MPAN, and CBCT scans from 33 dry human mandibles were acquired using the OP300 Maxio unit, totalizing 56 mandibular third molars to be evaluated. Three examiners evaluated each third molar according to their position, depth of impaction in the mandibular ramus, proximity between the dental root apexes and the mandibular canal, and the presence of radiographic signs of proximity to the mandibular canal. In addition, when there was a distance between the root apexes and the mandibular canal, it was measured. As a reference, these same parameters were assessed in the CBCT scans by a fourth examiner. For the statistical analysis, the weighted Kappa, Bland Altman, and Wilcoxon tests were performed (α = 0.05). RESULTS: The agreement between the assessments performed in the panoramic modalities with the CBCT ranged from 66.1% to 100.0% for the categorical variables. Overall, the agreement values of CPAN and MPAN with CBCT were similar. The distances between the dental root apex and the mandibular canal for both CPAN and MPAN were significantly underestimated compared to CBCT (p < 0.05). The intra- and interexaminer agreements of the examiners ranged from poor to almost perfect; in general, the agreements were higher in the evaluation performed in the MPAN than in the CPAN. CONCLUSIONS: The MPAN performs similarly to CPAN for evaluating mandibular third molars and their proximity relationship to the mandibular canal. CLINICAL RELEVANCE: Preoperative evaluation of lower mandibular third molars is usually performed using CPAN. Recently, a new tool, MPAN, was developed, which has not yet been tested for the evaluation of mandibular third molars and showed similar performance to CPAN in the present study. Future studies using MPAN are encouraged to evaluate other diagnostic tasks.

Asunto(s)

RESUMEN

Abstract This study aimed to assess the influence of the file format on the image quality parameters (image noise, brightness, and uniformity) of periapical radiographs acquired with different digital systems. Radiographic images of an acrylic phantom were acquired with two digital systems - Digora Toto and Express, and exported into five different file formats - TIFF, BMP, DICOM, PNG, and JPEG. Image noise, image brightness (mean of gray values), and image uniformity (standard deviation of gray values) were evaluated in all images. A two-way analysis of variance with Tukey's test as a post-hoc test was used to compare the results, considering the file formats and radiographic systems as the studied factors. A significance level of 5% was adopted for all analyses. The DICOM image file format presented lower image noise, higher brightness (higher mean gray values), and greater image uniformity (p<0.001) than the other file formats, which did not differ from each other for both digital radiography systems (p>0.05). The Express system revealed lower image noise and greater image uniformity than the Digora Toto system regardless of the image file format (p<0.001). Moreover, the Express showed higher brightness than the Digora Toto for all image file formats (p<0.001), except for the DICOM image file format, which did not significantly differ between the digital radiography systems tested (p>0.05). The DICOM image file format showed lower image noise, higher brightness, and greater image uniformity than the other file formats (TIFF, BMP, PNG, and JPEG) in both digital radiography systems tested.

Resumo Este estudo teve como objetivo avaliar a influência do formato do arquivo nos parâmetros de qualidade de imagem (ruído de imagem, brilho e uniformidade) de radiografias periapicais adquiridas com diferentes sistemas digitais. As imagens radiográficas de um fantoma de acrílico foram adquiridas com dois sistemas digitais - Digora Toto e Express, e exportadas em cinco formatos de arquivo diferentes - TIFF, BMP, DICOM, PNG e JPEG. O ruído da imagem, o brilho da imagem (média dos valores de cinza) e a uniformidade da imagem (desvio padrão dos valores de cinza) foram avaliados em todas as imagens. A análise de variância (ANOVA) bidirecional com o teste post-hoc de Tukey foi aplicada para comparar os resultados, considerando os formatos de arquivo e os sistemas radiográficos como os fatores estudados. Um nível de significância de 5% foi adotado para todas as análises. O formato de arquivo de imagem DICOM apresentou menor ruído de imagem, maior brilho (maiores valores médios de cinza) e maior uniformidade de imagem (p<0,001) do que os outros formatos de arquivo, que não diferiram entre si para ambos os sistemas de radiografia digital (p>0,05). O sistema Express apresentou menor ruído de imagem e maior uniformidade de imagem que o sistema Digora Toto, independentemente do formato do arquivo de imagem (p<0,001). Além disso, o Express mostrou maior brilho do que o Digora Toto para todos os formatos de arquivo de imagem (p<0,001), exceto para o formato de arquivo de imagem DICOM, que não diferiu significativamente entre os sistemas de radiografia digital testados (p>0,05). O formato de arquivo de imagem DICOM mostrou menor ruído de imagem, maior brilho e maior uniformidade de imagem do que os outros formatos de arquivo (TIFF, BMP, PNG e JPEG) em ambos os sistemas de radiografia digital testados.

RESUMEN

This study aimed to assess the effect of the MAR tool on the expression of artefacts in different regions of a tooth restored with different types of metal posts. Alveolar sockets (anterior, and posterior region) of a mandible and an unirradicular tooth were used. Cone beam computed tomography scans of the tooth without a metal post, and with cobalt-chromium (Co-Cr), nickel-chromium (Ni-Cr), or silver-palladium (Ag-Pd) were individually obtained, with 2 MAR conditions: disabled, and enabled. In an axial reconstruction, lines of interest (LOIs) were set around the canal: 4 in oblique (mesiobuccal, distobuccal, mesiolingual, distolingual) directions, and 4 in orthogonal (mesial, distal, buccal, lingual) directions. Beam-hardening artefacts expression was determined by calculating the difference in the mean of gray values (DMGV) between the experimental and control groups for each LOI. There was no significant difference in the DMGV values between "without MAR" and "with MAR" for any LOI, in neither anterior nor posterior mandible (p>0.05), for the Ni-Cr and Co-Cr groups. For the Ag-Pd, significant differences in the DMGV values were observed between "without MAR" and "with MAR" for most LOIs (p<0.05), mainly in oblique directions in the anterior region, and mesio-distal direction in the posterior region. MAR acted mostly in hypodense artefacts (negative DMGV). The effectiveness of the MAR tool of the OP300 CBCT unit varied according to the post material tested. It was effective in reducing the expression of artefacts raised by the Ag-Pd post, mainly in the tooth regions affected by hypodense artefacts, regardless of the mandibular region.

Asunto(s)

RESUMEN

Abstract This study aimed to assess the effect of the MAR tool on the expression of artefacts in different regions of a tooth restored with different types of metal posts. Alveolar sockets (anterior, and posterior region) of a mandible and an unirradicular tooth were used. Cone beam computed tomography scans of the tooth without a metal post, and with cobalt-chromium (Co-Cr), nickel-chromium (Ni-Cr), or silver-palladium (Ag-Pd) were individually obtained, with 2 MAR conditions: disabled, and enabled. In an axial reconstruction, lines of interest (LOIs) were set around the canal: 4 in oblique (mesiobuccal, distobuccal, mesiolingual, distolingual) directions, and 4 in orthogonal (mesial, distal, buccal, lingual) directions. Beam-hardening artefacts expression was determined by calculating the difference in the mean of gray values (DMGV) between the experimental and control groups for each LOI. There was no significant difference in the DMGV values between "without MAR" and "with MAR" for any LOI, in neither anterior nor posterior mandible (p>0.05), for the Ni-Cr and Co-Cr groups. For the Ag-Pd, significant differences in the DMGV values were observed between "without MAR" and "with MAR" for most LOIs (p<0.05), mainly in oblique directions in the anterior region, and mesio-distal direction in the posterior region. MAR acted mostly in hypodense artefacts (negative DMGV). The effectiveness of the MAR tool of the OP300 CBCT unit varied according to the post material tested. It was effective in reducing the expression of artefacts raised by the Ag-Pd post, mainly in the tooth regions affected by hypodense artefacts, regardless of the mandibular region.

Resumo O objetivo nesse estudo foi avaliar o efeito da ferramenta de redução de artefato (FRA) na expressão de artefatos em diferentes regiões de um dente restaurado com diferentes tipos de pinos metálicos. Foram usados ​​alvéolos (regiões anterior e posterior) de uma mandíbula e um dente unirradicular. Imagens de tomografia computadorizada de feixe cônico do dente sem pino metálico intracanal e com pinos de cobalto-cromo (Co-Cr), níquel-cromo (Ni-Cr) ou prata-paládio (Ag-Pd) foram individualmente obtidas, com 2 condições de FRA: desativada e ativada. Em uma reconstrução axial, linhas de interesse (LOIs) foram definidas ao redor do canal: 4 em direções oblíquas (mésio-vestibular, disto-vestibular, mésio-lingual e disto-lingual) e 4 em direções ortogonais (mesial, distal, vestibular e lingual). A expressão dos artefatos de endurecimento do feixe foi determinada pelo cálculo da diferença na média dos valores de cinza (DMVC) entre os grupos experimental e controle para cada LOI. Não houve diferença significativa nos valores de DMVC entre as condições "sem FRA" e "com FRA" para nenhuma das LOIs, nem na região anterior nem na região posterior da mandíbula (p>0,05), para os grupos Ni-Cr e Co-Cr. Para o Ag-Pd, diferenças significativas nos valores de DMVC foram observadas entre "sem FRA" e "com FRA" para a maioria das LOIs (p<0,05), principalmente nas direções oblíquas na região anterior, e na direção mesio-distal na região posterior. A FRA atuou principalmente em artefatos hipodensos (DMVC negativos). A eficácia da FRA disponível no aparelho de TCFC OP300 variou de acordo com o material do pino testado. Ela foi efetiva na redução da expressão de artefatos originados por pinos de Ag-Pd, principalmente nas regiões do dente afetadas por artefatos hipodensos, independentemente da região mandibular.

RESUMEN

OBJECTIVE: To evaluate the influence of the file format of digital periapical radiographs on the diagnosis of vertical root fracture (VRF). STUDY DESIGN: Periapical radiographic images of 34 single-rooted teeth-19 with VRF, and 15 without VRF were acquired using two digital systems-Digora Toto, and Digora Optime, and exported into four different file formats-TIFF, BMP, PNG, and JPEG, totaling 272 radiographs. The radiographs were assessed by five examiners for the detection of VRF, using a 5-point scale (1-definitely absent; 2-probably absent; 3-uncertain; 4-probably present; 5-definitely present). Diagnostic values of area under the ROC curve, specificity, and sensitivity for the diagnosis of VRF were calculated. The results were compared by two-way Analysis of Variance with post hoc Tukey's test. The intra- and inter-examiner agreements were measured by the Kappa test. The significance level was set at 5% for all analyses. RESULTS: The values of intra-examiner agreement varied from moderate (0.56) to almost perfect (0.81), while the values of inter-examiner agreement varied from fair (0.29) to moderate (0.60). The image file format did not influence the diagnostic values for VRF for any of the radiographic systems tested (p > 0.05). Digora Toto had significantly greater values of area under the ROC curve than Digora Optime for all file formats (p = 0.001). CONCLUSION: The image file format of periapical radiographs does not influence the diagnosis of VRF, regardless of the digital radiography system.

Asunto(s)

RESUMEN

AIM: To evaluate the influence of the tube current and metal artifact reduction (MAR) tool on the diagnosis of vertical root fractures (VRF) in a tooth adjacent to a zirconium implant, in cone-beam computed tomography (CBCT) images. METHODOLOGY: Thirty single-rooted teeth (15 with VRF and 15 control group) were individually positioned in a mandible, and scanned with the OP300 CBCT unit. Images were acquired using a standardized protocol: 5 × 5 cm field of view, 0.08-mm voxel size, and 90 kVp. Each tooth was scanned with and without a zirconium implant in its vicinity, using different tube currents (4 mA, 8 mA, and 10 mA) and conditions of MAR (enabled × disabled). Diagnostic values were calculated for each protocol, and compared by multi-way analysis of variance. RESULTS: The ROC curve and sensitivity values did not differ significantly among the tube currents, regardless of the presence of the implant and MAR condition (p > 0.05). There were also no significant differences among the tube currents for the specificity values (p > 0.05); however, the specificity differed significantly between the "with implant" and "without implant" conditions, within the same MAR condition and tube current (p < 0.05). Specificity was significantly lower when the implant was present (p < 0.05). CONCLUSION: The presence of a zirconium implant impairs the diagnosis of VRF in teeth adjacent to the artifact-generator material. Neither the tube current nor the MAR tool is effective in improving this diagnostic task. Therefore, in this clinical scenario, the use of the lowest tube current (4 mA), without MAR activation, is recommended. CLINICAL RELEVANCE: Considering that the tube current is one of the main factors that influence the radiation dose and image quality in CBCT, and that metal artifacts negatively influence the diagnosis of VRF in areas adjacent to the artifact-generator material, it is important to evaluate the effect of this energetic parameter in the diagnosis of VRF in teeth adjacent to zirconium implants.

Asunto(s)

RESUMEN

OBJECTIVES: To objectively assess the expression and direction of artefacts in the vicinity of metal posts positioned in different mandibular regions. MATERIALS AND METHODS: A human mandible had two sockets prepared-anterior and posterior regions-to accommodate a single-rooted tooth. Two CBCT units, Picasso Trio and OP300, were used. CBCT images of the tooth without metal post, and with silver-palladium, nickel-chromium, or cobalt-chromium posts (experimental groups) were individually acquired. Then, 8 lines of interest (LOIs) were determined around the root canal, in an axial reconstruction: 4 in orthogonal (buccal, lingual, mesial, and distal) directions, and 4 in oblique (mesiobuccal, distobuccal, mesiolingual, and distolingual) directions. The mean of gray values was measured for each LOI. RESULTS: For the OP300, in general, all experimental groups showed greater expression of hyperdense streaks in orthogonal LOIs and greater expression of hypodense streaks in oblique LOIs. For the Picasso Trio, for both mandibular regions, the buccal LOI showed greater expression of hypodense streaks; conversely, greater expression of hyperdense streaks was observed in the distal and distobuccal LOIs in the anterior region and in the mesiolingual LOI in the posterior region. The silver-palladium group showed significantly greater expression of beam hardening artefacts in the posterior region of the mandible, regardless of the CBCT unit (p < 0.05). The mandibular posterior region showed significantly lower gray values than the anterior region (p < 0.05). CONCLUSION: The expression and direction of artefacts produced in the vicinity of metal posts vary according to the mandibular region, composition of the post, and CBCT unit. CLINICAL RELEVANCE: The mapping of artefacts produced by metal posts reveals the root regions with greater expression of hypodense and hyperdense artefacts, which may contribute to recognizing regions more likely to mimic or hide root fracture lines.

Asunto(s)

RESUMEN

The aim in this study was to evaluate the influence of skeletal class, facial type, and sex on soft tissue thickness (STT) of the craniofacial midline in a Brazilian subpopulation. Thus, 121 cone beam computed tomography (CBCT) scans (54 males and 67 females, age 21 to 40 yrs) composed the study sample. Patients were classified according to skeletal class (class I, II, and III) and facial type (brachycephalic, mesocephalic, and dolichocephalic), and STT was measured (mm) in 10 landmarks in the craniofacial midline for each CBCT scan. Multivariate analysis of covariance evaluated facial STT with regard to multiple independent variables (sex, age - covariate, facial type, and skeletal class). TEM and rTEM assessed the intra-examiner agreement. STT was significantly greater in males than in females for all regions measured (p < 0.05), except for the pogonion-pogonion' landmark (p>0.05). In general, class III individuals had significantly thicker soft tissue in the maxilla - subspinale-subnasale', prosthion-labrale superius', and incision-stomion' regions, while class II subjects had thicker soft tissue in the infradentale-labrale inferius' mandibular landmark (p < 0.05). Regarding facial type, dolichocephalic individuals showed significantly thicker soft tissue in the supramentale-supramentale' mandibular landmark, whereas brachycephalic subjects had thicker soft tissue in maxillary regions - prosthion-labrale superius' and incision-stomion' (p < 0.05). rTEM values were below 5% for most landmarks, and all TEM values were below 1 mm. Skeletal class and facial type influence STT, showing a soft tissue compensation, with deeper soft tissue in areas with lower skeletal development, and/or where bone is positioned more posteriorly.

Asunto(s)

RESUMEN

This study assessed the safety and efficacy of three different doses of BoNT-A for persistent myofascial pain (MFP). One hundred female subjects were randomly assigned into five groups (n = 20): oral appliance (OA), saline solution (SS) and three BoNT-A groups with different doses. Pain intensity and pressure pain threshold were evaluated up to 24 weeks after treatment. Adverse effects related to muscle contraction, masticatory performance, muscle thickness and mandibular bone volume were also assessed. Changes over time were compared within and between groups. The "nparLD" package and Wilcoxon signed-rank test were used to analyze the data. BoNT-A reduced pain intensity (p < 0.0001) and increased pressure pain threshold (p < 0.0001) for up to 24 weeks compared to the placebo. No differences were found between BoNT-A and OA at the last follow-up. A transient decline in masticatory performance (p < 0.05) and muscle contraction (p < 0.0001), and a decrease in muscle thickness (p < 0.05) and coronoid and condylar process bone volume (p < 0.05) were found as dose-related adverse effects of BoNT-A. Regardless of the dose, BoNT-A was as effective as OA on MFP. Notwithstanding, due to BoNT-A dose-related adverse effects, we suggest the use of low doses of BoNT-A in MFP patients that do not benefit from conservative treatments.

Asunto(s)

RESUMEN

OBJECTIVES: To compare the pulp volume of individuals with altered and normal systemic blood pressure (BP) in order to verify if high BP promotes dimensional modifications in the pulp space. MATERIALS AND METHODS: Cone beam computed tomography scans of 91 patients (49 females and 42 males, mean age 31.7 ± 6.38 years) who had a healthy maxillary canine were selected. Values of arterial BP measured at two dental visits were used to classify the sample as normal BP (< 130 × 80 mmHg) and altered BP (≥ 130 × 80 mmHg); 49 patients had normal BP and 42 had altered BP. One oral radiologist evaluated each patient's pulp and tooth volumes, using semi-automatic segmentation, and the tooth length. Data were submitted to Student's t test and logistic regression, with a significance level of 5% (p < 0.05). RESULTS: Pulp volume (p = 0.0027), pulp volume/tooth volume (p = 0.0013), and pulp volume/tooth length (p = 0.0007) ratios were greater in the altered BP group. Conversely, there was no difference in tooth volume between the groups (p = 0.0697). A logistic regression model (p = 0.0002) using pulp volume and age enabled the development of a formula for predicting altered BP, with 68% accuracy. CONCLUSIONS: Individuals with altered systemic BP have greater pulp volumes than those with normal BP. The formula developed in this study may indicate the presence of altered BP. CLINICAL RELEVANCE: As arterial hypertension is a silent disease that produces no warning signs or symptoms, identification of modifications in the pulp volume in cone beam computed tomography scans may be an adjuvant sign of the diagnosis of this disease.

Asunto(s)

RESUMEN

OBJECTIVES: To access the influence of the addition of a lead foil to intraoral digital radiographic receptors on image contrast and approximal caries lesions diagnosis. METHODS: 40 posterior teeth were distributed in silicone phantoms composed of two premolars, two molars and a non-test canine. Radiographic images of the phantoms were obtained with and without the incorporation of a lead foil, using the Digora Optime and Digora Toto systems. Four observers scored the images for the presence of caries lesions, using a 5-point scale. Images of an aluminum step wedge were acquired with and without the incorporation of a lead foil. Gray values and standard deviation of gray values were calculated in different thickness of the step wedge and, then, contrast variation was calculated. RESULTS: Presence of a lead foil did not influence caries lesions diagnostic values, regardless of the type of digital system (p > 0.05). In general, the objective analysis was not influenced by the presence of a lead foil in any of the tested systems (p > 0.05). However, Digora Toto images showed greater gray values, lower standard deviation of gray values and lower contrast variation, regardless of the presence of the lead foil (p < 0.05). CONCLUSIONS: The addition of a lead foil to intraoral digital receptors did not influence image contrast nor caries lesions diagnosis.

Asunto(s)

RESUMEN

OBJECTIVE: To evaluate the artifact expression of a new material-polylactic acid (PLA)/hydroxyapatite (HA)/graphene oxide (GO) nanocomposite-and compare it with that of commonly used dental materials, using cone-beam computed tomography. MATERIALS AND METHODS: Cylinders of amalgam alloy, metal alloy, titanium, gutta-percha, and PLA/HA/GO were individually placed in the center of an acrylic phantom. Three images of each phantom + cylinder set were acquired using a Picasso Trio unit (Vatech, Hwaseong, South Korea) set at 90 kVp, 3.7 mA, 0.2 mm3 voxel size, and 12 × 8.5 cm FOV. Three images of a control group (sound phantom) were also obtained. Eight ROIs were established in each image to evaluate the standard deviation (S.D.) of gray values in the ImageJ Software. The Kruskal-Wallis test with the Student-Newman-Keuls post hoc was employed, considering a significance level of 5%. RESULTS: There were no significant differences in S.D. between the control and PLA/HA/GO images (p = 0.712). Both control and PLA/HA/GO showed fewer image artifacts than the other materials (p < 0.05). The images of the amalgam alloy did not differ from the metal alloy images (p = 0.691), showing more artifacts than the gutta-percha (p = 0.028) and titanium (p = 0.051). CONCLUSIONS: The PLA/HA/GO produced fewer artifacts and a better-quality image than the other tested materials. CLINICAL RELEVANCE: The PLA/HA/GO has physical and biological properties similar to those of dental materials. Since it has produced fewer image artifacts, this new nanocomposite may be employed in the near future, enhancing the diagnosis in CBCT.

Asunto(s)

RESUMEN

OBJECTIVE: To evaluate the quality of images obtained with the addition of a lead foil to intraoral digital receptors. METHODS: Radiographic images of 34 single-rooted human teeth - 19 with vertical root fracture (VRF) and 15 of the control group - were obtained with and without the addition of a lead foil, using the VistaScan, Express, Digora Optime and Digora Toto systems. Images were evaluated by five observers regarding the diagnosis of VRF, using a 5-point scale. In a second moment, an observer preference analysis related to the presence of the lead foil was performed. Images of an acrylic phantom were also obtained with and without the addition of a lead foil, and the quantities of uniformity, grey value and standard deviation of grey values were obtained. RESULTS: There were no significant differences in the VRF diagnostic values, considering the presence of the lead foil. Regarding the image quality preference, the observers preferred images acquired with the lead foil for all systems tested, but with greater values for Digora Optime (61.33%) and Express (61.33%). The presence of the lead foil did influence the image uniformity in all systems tested ( p < 0.05). Moreover, the lead foil increased the mean of grey values for Digora Optime and Express images ( p < 0.05), however it did not influence the SD in any of the digital systems ( p > 0.05). CONCLUSION: The addition of a lead foil to intraoral digital receptors produces a positive effect in the image quality objectively detected by means of uniformity and subjective visual preference.

Asunto(s)

RESUMEN

BACKGROUND: As sex estimation is an important step to delineate the biological profile, the development of tools employing anatomical structures which may maintain their integrity even after extreme events, such as the maxillary sinus, become useful for forensic identification. Thus, the aim in the present study was to develop and validate a formula for sex estimation through measurements in the maxillary sinuses in a Brazilian population, using cone beam computed tomography (CBCT) scans. MATERIAL AND METHODS: Linear and volumetric measurements in the maxillary sinus were performed bilaterally in 94 CBCT scans from 45 males (mean age 25.2 ± 0.79) and 49 females (mean age 23.7 ± 0.50). The OnDemand 3D software was employed for linear measurements (height, length and width of, and the largest distance between the right and left maxillary sinuses), while the ITK-SNAP 3.0 segmentation software was used to acquire the volume. The data obtained was applied to a mathematical model for sex estimation. To validate the developed formula, another sample composed of 60 CBCT images of Brazilian individuals was tested. RESULTS: Overall, maxillary sinuses' measurements were significantly higher in males, without statistically significant differences between the right and left sides within each group. The most dimorphic measurement was the height, with an accuracy of 77.7% regarding sex estimation. The formula created lead to a sex estimation of 87.8% for females and 80% for males, with an overall accuracy of 84%. When the formula validity was tested in another sample, it showed an accuracy of 82.4%. CONCLUSION: The formula developed through measurements in the maxillary sinus using CBCT scans showed an accuracy of 84% for sex estimation and can be applied as a complementary method for human identification in the Brazilian population.

Asunto(s)