RESUMEN

OBJECTIVES: To evaluate anchorage loss after en masse retraction in bimaxillary dentoalveolar protrusion patients using friction vs frictionless mechanics. MATERIALS AND METHODS: Thirty patients with bimaxillary dentoalveolar protrusion needing extraction of upper first premolars and en masse retraction with maximum anchorage were included in this two-arm, parallel, single-center, single-blinded randomized clinical trial with a 1:1 allocation ratio using fully sealed opaque envelopes. Friction group retraction utilized elastomeric power chain between miniscrews and hooks crimped mesial to upper canines on 17 × 25 stainless steel archwire. Frictionless group used customized T-loop springs loading upper first molars indirectly anchored to miniscrews. Activation was every 4 weeks until full retraction. The primary outcome assessed was anchorage loss evaluated at cusp tip and root apex of the first molar. First molar rotation, incisor tip and torque, and root resorption of anterior teeth were evaluated on digital models and cone beam computed tomography taken before and after space closure. RESULTS: Anchorage loss at crown of first molar was significantly more in frictionless group by 2.1 mm (95% CI = -0.4 to 3.5), (P = .014), while there was no significant difference in anchorage loss at root apex between groups. Significant mesial in molar rotation of 6.672° (95% CI = 12.2-21.2), (P = 0.02) was greater in the frictionless group. Both groups showed comparable tip, torque, and root resorption values. No severe harms were reported. There was mild gingival overgrowth and inflammation in the frictionless group due to T-loop irritation. CONCLUSIONS: Extra anchorage considerations are needed during en masse retraction when frictionless mechanics is implemented as higher anchorage loss and molar rotation were detected. No difference in tip, torque, and root resorption was observed.

Asunto(s)

RESUMEN

Background: Canine retraction has been successful with various force systems and retraction techniques. The appointment interval for force reactivation in canine retraction along the archwire is 4-8 weeks. Aims: The aim was to evaluate the effect of different reactivation intervals on the rate of space closure. Settings and Design: This split-mouth randomized clinical trial recruited 38 patients indicated for the first premolar extraction. Methods: Monthly digital models were acquired for 6 months. The first premolars were extracted, and temporary anchorage devices were placed for maximum anchorage control. The canines were retracted using elastomeric chains which were replaced every 2, 4, 6, or 8 weeks. The monthly rate of canine retraction was measured. The time to space closure was calculated. The secondary outcome was the mesial drift of the first molars. Statistical Analysis: The Kaplan-Meier survival analysis and the Friedman test evaluated and compared the groups. Results: There was no significant difference between the monthly canine retraction rate or the first molar mesial drift between the groups. The mean time to space closure was 5.74 months in the 2-week reactivation group, which was statistically less than the other groups. Conclusions: The 2-week reactivation interval may reduce time to space closure. Direct anchorage control with miniscrews limited anchorage loss significantly.

RESUMEN

To investigate the effectiveness of AcceleDent Aura vibrating device on the rate of canine retraction. Thirty-two patients requiring extraction of upper first premolars and canine retraction were randomly allocated with a 1:1 ratio into either no-appliance group or the AcceleDent Aura appliance group. Canine retraction was done applying 150gm of retraction force using NiTi coil springs on 16 × 22 stainless steel archwires. The duration of the study was 4 months. Models were collected and digitized directly after extraction of upper first premolars and at monthly intervals during canine retraction for recording the monthly as well as the total distance moved by the canine. Digitized models were superimposed on the initial model and data were statistically analyzed. Anchorage loss, rotation, tipping, torque and root condition were evaluated using cone beam computed tomography imaging. Pain was evaluated by visual analog scale. No patients were dropped-out during this study. There was no statistically significant difference between both groups regarding the total distance travelled by the canine (P = 0.436), as well as the rate of canine retraction per month (P = 0.17). Root condition was the same for the two groups. Regarding the pain level, there was no statistically significant difference between the two groups at day 0 (P = 0.721), after 24 h (P = 0.882), after 72 h (P = 0.378) and after 7 days (P = 0.964). AcceleDent Aura was not able to accelerate orthodontic tooth movement. Pain level couldn't be reduced by vibrational force with an AcceleDent device during orthodontic treatment. Root condition was not affected by the vibrational forces.

Asunto(s)

RESUMEN

BACKGROUND: Orthodontic relapse is a frequent problem that many patients experience. Although orthodontic therapy has advanced, recurrence rates can still reach 90%. We undertook a study to look at the possibilities of laser bio-stimulation and stem cells because they have showed promising outcomes in lowering recurrence rates. OBJECTIVES: Our objective was to analyze the effects of Low-level laser therapy (LLLT) and Mesenchymal stem cells (MSC) alone and collectively on the rate of orthodontic relapse in rats radiographically and histologically. METHODS: Rat maxillary central incisors were moved distally for two weeks. One week later, the incisors were retained. Animals (n = 40) were split into four groups. Control group (C); laser treatment Group (L), Bone marrow mesenchymal stem cells Group (BMSCs) and combination of Stem cells and laser-irradiation group (BMSCs-L). Removed retainer permitted relapse. Before stem cell application or laser irradiation, each animal underwent two CBCT scans. Rat maxillae were stained with Hx&E, Masson trichrome, and tartrate-resistant acid phosphatase antibody for histology, histochemistry, and immunohistochemistry. RESULTS AND CONCLUSIONS: LLLT could reduce the relapse tendency, as shown by increased bone density and enhanced remodeling of hetero-formed periodontal ligament (PDL). Furthermore, the transfer of BMMSCs on the pressure side had positive effects on PDL remodeling and decreased, but did not inhibit, the relapse rate. Finally, the synergistic effects of the application of LLLT and BMMSC were better than the control but still moderate and long-lasting. CLINICAL SIGNIFICANCE: Based on the improved relapse rate as proven in the present study, the Application of both LLLT and stem cells can be adopted to reduce the relapse tendency either lonely or collectively.

RESUMEN

OBJECTIVE: To evaluate the prevalence of bullying among schoolchildren and to study the correlation between bullying and a specific type of malocclusion, self-esteem, oral health-related quality of life (OHRQoL), the need for orthodontic treatment and socioeconomic status. DESIGN: A cross-sectional study. SETTING: Low, middle and high socioeconomic group schools in the same educational district in Cairo, Egypt. PARTICIPANTS: A total of 324 Egyptian schoolchildren aged 11-14 years. METHODS: Validated questionnaires were used to assess self-reported bullying frequency and intensity, self-esteem and OHRQoL. The Index of Orthodontic Treatment Need (IOTN) was used to assess the orthodontic treatment need and the participants' occlusion was classified according to the British Standard Incisors (BSI) classification. RESULTS: Bullying was found to be prevalent in 61.7% of the sample. Regression analysis revealed that participants with a Class II division 1 incisor relationship had the highest odds ratio (OR) for predicting bullying (OR = 1.86, 95% confidence interval [CI] = 1.38-2.15). Being bullied was significantly associated with lower self-esteem (OR = 0.47, 95% CI = 0.13-0.78), worse OHRQoL (OR = 2.73, 95% CI = 1.95-3.15) and a high need for orthodontic treatment, as determined by the IOTN Dental Health Component score (OR = 1.33, 95% CI = 1.05-1.95) and IOTN Aesthetic Component score (OR = 1.52, 95% CI = 1.12-1.88). Moreover, participants in high and middle socioeconomic groups had a lower OR for predicting bullying than those in the low socioeconomic group (OR = 0.27, 95% CI = 0.13-0.54). CONCLUSION: The bullying prevalence among Egyptian schoolchildren aged 11-14 years was very high. The prevalence of bullying was higher in schoolchildren with higher orthodontic treatment need and Class II division 1 incisor relationship. Bullying was correlated to poor self-esteem as well as poor OHRQoL. In addition, low socioeconomic status was found to be a potential predictor for bullying.

Asunto(s)

RESUMEN

The dentigerous cyst is a developmental odontogenic asymptomatic cyst, that is associated with the crown of an unerupted or impacted tooth. Early diagnosis is important to avoid any future complications and choose the best treatment option. The purpose of this case report is to describe the management of a dentigerous cyst related to lower second molar in a young female patient using orthodontic traction as a conservative treatment approach. This procedure helps to spare the patient an unnecessary surgical excision procedure and the associated excessive bone removal for a safety margin, stimulates bone healing and promotes the eruption of the cyst-associated tooth.

Asunto(s)

RESUMEN

INTRODUCTION: Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency. OBJECTIVE: The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement. METHODS: Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment. RESULTS: The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed. CONCLUSION: The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

Asunto(s)

Asunto(s)

RESUMEN

OBJECTIVE: The aim is to compare the facial esthetics following nasoalveolar molding (NAM) versus computer-aided design NAM (CAD/NAM) in patients with bilateral cleft lip/palate (CLP). DESIGN: The trial is a randomized comparative trial with a 1:1 allocation ratio. PARTICIPANTS: Thirty infants with bilateral complete cleft lip and palate were recruited. INTERVENTIONS: Patients were randomized between NAM and CAD/NAM groups. The treatment steps described by Grayson were followed for the NAM group. In the CAD/NAM group, digitized maxillary models were made to create a series of modified virtual models, which were used to fabricate the molding plates using 3-dimensional printing technology. The nasal stents were then added to the intraoral plates following the Grayson method. The study lasted for 4 months. MAIN OUTCOMES: The assessment of the changes observed in the interlabial gap and nasolabial esthetics was done using standardized 2-dimensional photographs. The correlation between dental arch changes and extraoral facial esthetics was studied. RESULTS: Both modalities showed improvement in nasolabial esthetics before the lip surgery. No statistically significant difference was found between NAM and CAD/NAM groups in any of the assessed variables. CONCLUSIONS: Both interventions were effective in the management of infants with bilateral CLP.

Asunto(s)

RESUMEN

ABSTRACT Introduction: Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency. Objective: The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement. Methods: Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment. Results: The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed. Conclusion: The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

RESUMO Introdução: Os ortodontistas buscam otimizar a eficiência do tratamento quanto ao tempo de duração, à posição dos dentes e aos efeitos adversos. Um aspecto ainda não avaliado são os diferentes intervalos entre as ativações. Objetivo: O objetivo desse estudo controlado e randomizado de boca dividida foi avaliar a influência de diferentes intervalos de reativação na eficiência da movimentação dentária. Métodos: Foram recrutados 38 pacientes com má oclusão de Classe I com biprotrusão dentoalveolar ou apinhamento severo, Classe II com deficiência mandibular ou Classe III, que necessitavam de extração do primeiro pré-molar e retração do canino. As cadeias elastoméricas gerando 150 g foram substituídas a cada duas, quatro, seis ou oito semanas, constando 36, 37, 36 e 36 quadrantes alocados aleatoriamente nesses grupos, respectivamente. O desfecho primário foi a taxa de retração do canino. Os desfechos secundários foram a inclinação, a rotação e a reabsorção radicular do canino, e a dor. Somente os avaliadores dos resultados não tinham conhecimento da alocação nos grupos. Resultados: O movimento total médio para os seis meses foi de 5,14; 5,31; 2,79 e 3,85 mm para os intervalos de reativação de duas semanas, quatro semanas, seis semanas e oito semanas, respectivamente. A reabsorção radicular foi significativamente maior nos grupos de duas e quatro semanas. Não foram observados eventos adversos. Conclusão: A taxa de retração, a inclinação e a rotação do canino e a dor foram semelhantes nos grupos com intervalos de ativação de duas, quatro, seis e oito semanas. Intervalos de reativação mais longos mostram menos reabsorção radicular. O protocolo do estudo não foi pré-registrado. O estudo foi autofinanciado.

RESUMEN

BACKGROUND: The aim of this randomized controlled trial was to assess the effectiveness of taping alone in changing nose and lip aesthetics in infants with unilateral complete cleft lip and palate before and after surgical lip repair. METHODS: The study design was a prospective, balanced, randomized, parallel-group, single-blinded, controlled trial. All the steps were carried out in the Department of Orthodontics of Cairo University in Egypt. Thirty-one infants with nonsyndromic unilateral complete cleft lip and palate were randomly assigned to either no treatment (control) or taping groups. In the taping group, all infants received horizontal tape between the two labial segments, aiming to decrease the cleft gap. No other interventions were performed in this group. Standardized photographs and videos were taken of the infants in both groups at the beginning of the treatment (T1), directly before surgical lip repair (T2), and 2 weeks after surgical lip repair (T3). Photographs and shots from videos were calibrated and used for outcome assessment. Blinded assessors carried out all the measurements digitally on the standardized photographs at T1, T2, and T3 using computer software. RESULTS: Significant changes in all the measurements were recorded in the taping group at T2 before surgical lip repair in comparison with the control group. At T3, no differences were found between the two groups. CONCLUSIONS: Taping is a successful intervention in changing nose and lip aesthetics before surgical lip repair. After surgical lip repair, both groups had matching aesthetics. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, I.

Asunto(s)

RESUMEN

This observational study evaluates three-dimensionally the relation between the root of maxillary canine and overlying labial cortical plate of bone during orthodontic canine retraction. Eighty-four bilateral maxillary canines in 42 patients were retracted in the extraction space of first premolars, using conventional orthodontic NiTi retraction spring delivering 150gm. Three-dimensional evaluation at the cusp tip, root apex, and the overlying cortical bone was done based on Classification of Root/Cortical bone relation (CRCR) before and after canine retraction. 168 observations of the canines pre- and post-retraction showed a mean distal movement of the canine cusp tip of 3.78(± 2.05) mm, while the canine root apex was almost stationary. Scarcely, 5.4% of the canine roots and root apices persisted in the medullary bone during retraction, while 16.1% contacted the overlying cortical bone. Fenestration of the overlying cortical bone by the canine roots or root apices occurred in 78.6% of the sample. The unembellished intimacy between the canine root and apex to the overlying thick dense cortical bone might have the decelerating effect on the maxillary canine retraction. The natural bone plate labial to the maxillary canine root did not yield infront nor enlarge due to canine retraction, but else defeated the current orthodontic biomechanical implementation.

Asunto(s)

RESUMEN

OBJECTIVE: The aim is to compare between the clinical effectiveness of nasoalveolar molding (NAM) versus the computer-aided design NAM (CAD/NAM) in patients with bilateral clefts. DESIGN: The trial is a randomized comparative trial with 1:1 allocation ratio. PARTICIPANTS: Thirty infants with bilateral complete cleft lip and palate were recruited. INTERVENTIONS: Patients were randomized between NAM and CAD/NAM groups. The treatment steps described by Grayson were followed for the NAM group. In the CAD/NAM group, digitized maxillary models were made to create series of modified virtual models which were used to fabricate the molding plates using 3-dimensional printing technology. The nasal stents were then added to the plates following Grayson method. The study lasted for 4 months. MAIN OUTCOMES: The primary outcome was to evaluate the changes in the intersegment cleft gap. Secondary outcomes included the analysis of the maxillary arch in transverse, anteroposterior, and vertical dimensions as well as the premaxillary deviation and rotation. Chair side time was assessed for both methods. RESULTS: Both modalities decreased the intersegment cleft gap. The CAD/NAM plates caused more reduction in the total arch length by 1.99 mm (-3.79 to 0.19, P = .03) as compared to the NAM treatment. No differences were found between groups in the transverse and vertical maxillary arch changes. CONCLUSIONS: Both interventions were effective in narrowing the cleft gap. Similar maxillary changes were found in both groups. The CAD/NAM modality required less chair side time compared to the NAM treatment.

Asunto(s)

Asunto(s)

RESUMEN

OBJECTIVES: To compare the root resorption resulting from miniscrew-supported maxillary posterior dentoalveolar intrusion using two different force magnitudes. MATERIALS AND METHODS: Adult patients with skeletal open bite, indicated for maxillary posterior dentoalveolar intrusion, were recruited and randomly assigned to the comparison or intervention groups. The comparison group involved applying 200 g of intrusive force per segment, which measured 20 g per root, while this force was 400 g per segment in the intervention group, measuring 40 g per root. RESULTS: Twenty participants were included in the final analysis after 2 patients dropped out, 1 in each group, to end up with 10 subjects (200 roots) per group. There was statistically significant root resorption of 0.84 ± 0.96 mm and 0.93 ± 1.00 mm in the comparison and the intervention groups, respectively. However, there was no statistically significant difference between the groups. CONCLUSIONS: Root resorption inevitably took place in association with orthodontic intrusion. However, increasing the magnitude of the intrusive force did not increase the amount of root resorption, either statistically or clinically.

Asunto(s)

Asunto(s)

RESUMEN

OBJECTIVES: To compare the effects of two different force magnitudes on maxillary posterior segment intrusion using mini-screws. The null hypothesis was that there would be no difference between the two force magnitudes. MATERIALS AND METHODS: Adult patients with skeletal open bite and a dental open bite ranging from 3 to 8 mm were recruited for this trial. The comparator group had 200 g of intrusive force applied for posterior segment intrusion, whereas 400 g of force was applied in the intervention group. Primary outcomes were the amount of posterior teeth intrusion and anterior open bite closure. RESULTS: Twenty-two subjects were randomized to include 11 participants in each group. One participant dropped out in each group, leaving us with 10 subjects to be analyzed per group. There was statistically significant posterior teeth intrusion of 2.42 ± 2.06 and 2.26 ± 1.87 mm for the comparator and intervention groups, respectively, with no difference between them. Statistically significant open bite closure was achieved in both groups, measuring 2.24 ± 1.18 and 3.15 ± 1.06 mm in the comparator and intervention groups, respectively, with no difference between them. CONCLUSIONS: Both the 200 g and 400 g intrusive forces yielded similar outcomes in terms of posterior teeth intrusion and anterior open bite closure.

Asunto(s)

RESUMEN

OBJECTIVE: The aim of the current study was to introduce and measure the effectiveness of a new 3D-printed nasoalveolar molding (D-NAM) appliance on improving the maxillary arch dimensions (MADs) in infants with unilateral complete cleft lip and palate (UCLP) before surgical lip repair. DESIGN: A prospective, balanced, randomized, parallel groups, single-blinded, controlled trial. SETTING: All the steps of the current study were carried in the Department of Orthodontics, Cairo University in Egypt. PARTICIPANTS: Thirty-four, nonsyndromic infants with UCLP. INTERVENTIONS: The eligible infants were randomly assigned into either no-treatment (control) or to the new D-NAM groups. In D-NAM group, the maxillary models were 3D scanned into virtual models onto which segmentation and alveolar segments approximation were performed. Approximation movements were divided into 3 models representing 3 activation steps. On each of these models, virtual appliance construction was performed followed by 3D printing of the appliance. Nasal stent was added manually to the appliances of the second and third steps. Horizontal tapes were applied to infants in the D-NAM group only. MAIN OUTCOMES MEASURES: A Blinded assessors carried all the MADs measurements virtually on digital models collected at the beginning (T1) and after (T2) treatment. RESULTS: Clinically and/or statistically significant improvements in all the measured MADs were recorded in D-NAM group at T2 before surgical lip repair in comparison to control group. CONCLUSIONS: The introduced D-NAM/3D-printed appliance is a simple and efficient technique to improve the MADs in infants with UCLP before surgical lip repair.

Asunto(s)

RESUMEN

OBJECTIVE: The aim of the current randomized controlled trial (RCT) was to assess the effectiveness of taping alone in changing the maxillary arch dimensions (MADs) in infants with unilateral complete cleft lip and palate (UCLP) before surgical lip repair. DESIGN: A prospective, balanced, randomized, parallel-group, single-blinded, controlled trial. SETTING: All the steps of the current study were carried in the Department of Orthodontics, Cairo University in Egypt. PARTICIPANTS: Thirty-one, nonsyndromic infants with UCLP. INTERVENTIONS: The eligible infants were randomly assigned to either no-treatment (control) or taping groups. In the taping group, all the infants received horizontal tape between the 2 labial segments aiming to decrease the cleft gap. No other interventions were performed to infants included in this group. Rubber base impressions were made to all the included infants in both groups at the beginning of the treatment (T1) and directly before surgical lip repair (T2). All the produced models were scanned using a desktop scanner producing digital models for outcome assessment. MAIN OUTCOMES MEASURES: A blinded assessor carried out all the MAD measurements virtually on the produced digital models at the beginning (T1) and after (T2) treatment. RESULTS: Clinically and/or statistically significant changes in all the measured MADs were recorded in the taping group at T2 before surgical lip repair in comparison to the control group. CONCLUSIONS: It seems that taping alone is an efficient tool in changing the MADs before surgical lip repair in infants with UCLP.

Asunto(s)

Asunto(s)