RESUMEN

BACKGROUND: Maternal thyroid dysfunction has been associated with a variety of adverse pregnancy outcomes. Laboratory measurement of thyroid function plays an important role in the assessment of maternal thyroid health. However, occult thyroid disease and physiologic changes associated with pregnancy can complicate interpretation of maternal thyroid function tests (TFTs). OBJECTIVE AND METHODS: To 1) establish the prevalence of laboratory evidence for autoimmune thyroid disease (AITD) in pregnant women; 2) establish gestational age-specific reference intervals for TFTs in women without AITD; and 3) examine the influence of reference intervals on the interpretation of TFT in pregnant women. Serum samples were collected from 2272 pregnant women, and TFT performed. Gestational age-specific reference intervals were determined in women without AITD, and then compared with the non-pregnant assay-specific reference intervals for interpretation of testing results. RESULTS: Thyroid peroxidase antibodies (TPO-Ab) and thyroglobulin antibodies (Tg-Ab) were positive in 10.4 and 15.7% of women respectively. TPO-Ab level was related to maternal age, but TPO-Ab status, Tg-Ab status, and Tg-Ab level were not. Women with TSH > 3.0 mIU/l were significantly more likely to be TPO-Ab positive. Gestational age-specific reference intervals for TFT were significantly different from non-pregnant normal reference intervals. Interpretation of TFT in pregnant women using non-pregnant reference intervals could potentially result in misclassification of a significant percentage of results (range: 5.6-18.3%). CONCLUSION: Laboratory evidence for thyroid dysfunction was common in this population of pregnant women. Accurate classification of TFT in pregnant women requires the use of gestational age-specific reference intervals.

Asunto(s)

RESUMEN

Our objective was to evaluate the hemocompatibility of biodegradable stent fibers, employing a closed-loop circulation system filled with human blood. We also investigated the effects of the anti-inflammatory and anti-proliferative drugs curcumin and paclitaxel, incorporated into stent fibers. Fresh whole blood was circulated in four parallel closed-loop systems: the empty tube circuit (control) and tubes containing either a PLLA fiber coil (PLLA), a curcumin-loaded PLLA coil (C-PLLA) or a paclitaxel-loaded PLLA coil (P-PLLA). The influence of PLLA fiber, alone or loaded with drug incorporated during melt-extrusion, on leukocyte and platelet adhesion and activation was determined by flow cytometry. The effects of blood flow and fiber properties on cell deposition were assessed by scanning electron microscopy (SEM). The flow cytometry results clearly demonstrated that PLLA triggers blood cell activation at the site of deployment, as shown by increases in CD11b, CD62P and leukocyte-platelet aggregates, compared to controls. Curcumin and paclitaxel treatments both significantly reduced leukocyte and platelet activation and adhesion to PLLA fibers, as shown by flow cytometry and SEM. Activated leukocytes and platelets revealed significantly lower CD11b and CD62P receptor binding for C-PLLA compared with PLLA alone, and slightly lower for P-PLLA. Reductions in platelet-leukocyte aggregates were observed as well. In addition, there was less leukocyte and platelet adhesion to C-PLLA, compared with PLLA fiber controls, as shown by SEM. A continuous linear thrombus, composed of platelets, leukocytes, red blood cells and fibrin was occasionally detected along the line of tangency between the coil and the tube wall. Flow separation and eddying, proximal and distal to the line of tangency of coil and tube, is thought to contribute to this deposit. Curcumin was more effective than paclitaxel in reducing leukocyte and platelet activation and adhesion to PLLA stent fibers in this setting. However there was evidence of paclitaxel degeneration during melt extrusion that may have inhibited its effectiveness. Incorporation of the anti-inflammatory and anti-proliferative drug curcumin into bioresorbable stent fibers is proposed to prevent thrombosis and in-stent restenosis.

Asunto(s)

RESUMEN

Bioresorbable films can serve simultaneously as anatomic support structures and as drug delivery platforms. In the present study, bioresorbable poly(L-lactic acid) (PLLA) films containing dexamethasone were prepared by solution processing methods. Their in vitro studies focused on the mechanical properties with respect to morphology and degradation and erosion processes. Novel expandable support devices (stents) developed from these films were studied. Such a stent would support conduits, such as the neonatal trachea to treat tracheal malacia, until the airway matures, and would then be totally resorbed, obviating the need for a removal operation. The PLLA films showed good initial mechanical properties. They can accommodate drug incorporation on the film surface and also in the bulk. Water incubation of the films results in a decrease in their tensile mechanical properties, due to chain scission and morphological changes. These changes can vary from degradation and small changes in morphological features to erosion, leading to a microporous structure, depending on the polymer. The cumulative release of dexamethasone from the films is linear. The rate of release is determined by the film's structure (drug location/dispersion). The stents demonstrated good mechanical properties. The initial radial compression strength of the stent is determined mainly by the polymer structure. Drug incorporation has a minor effect on the initial stent strength. Exposure to radial compression stress results in elastic reversible deformation or a sudden brittle fracture, depending on the polymer. A 20-week in vitro study of the stents showed that they are applicable for supporting body conduits, such as the trachea.

Asunto(s)

RESUMEN

Bioresorbable films can serve simultaneously as anatomic support structures and as drug delivery platforms. In the present study, bioresorbable PLLA films containing dexamethasone were developed through solution processing. The effect of processing parameters on the film morphology and the resulting mechanical properties was studied. A model describing the structuring of these films is suggested. Generally, the solvent evaporation rate determines the kinetics of drug and polymer crystallization and thus, both the mode of drug dispersion in the polymer and the resulting mechanical properties. Two types of structured films were studied: (1) a polymer film with drug located on its surface, obtained due to drug skin formation accompanied by a later polymer core formation; and (2) a polymer film with small drug particles and crystals distributed within the bulk, obtained by parallel solidification of the two components. A prototypical application of these films is an expandable biodegradable support structure (stent). which we have developed. This stent demonstrated good initial mechanical properties. The film structure has only a minor effect on the stent radial compression strength, but more significantly affects the tensile mechanical properties.

Asunto(s)

RESUMEN

Realistic laparoscopic surgical simulators will require real-time graphic imaging and tactile feedback. Our research objective is to develop a cost-effective haptic workstation for the simulation of laparoscopic procedures for training and treatment planning. The physical station consists of a custom-built frame into which laparoscopic trocars and surgical tools may be attached/inserted and which are continuously adjustable to various positions and orientations to simulate multiple laparoscopic surgical approaches. Instruments inserted through the trocars are attached to end effectors of two haptic devices and interfaced to a high speed PC with fast graphics capability. The haptic device transduces 3D motion of the two manually operated surgical instruments into slave maneuvers in virtual space. The slave instrument tips probe the simulated organ. Simulations currently in progress include: 1) Surface-only renderings, deformation, and haptic interactions with elements in the gall gladder surgical field; 2) Voxel-based simulations of the bulk manipulation of tissue; 3) laparoscopic herniorrhaphy. This system provides force feed-forward from the grasped tools to the contact tissue in virtual space, with deformation of the tissue by the virtual probe, and force feedback from the deformed tissue to the operator's hands.

Asunto(s)

RESUMEN

A library of Pseudomonas fluorescens subsp. cellulosa genomic DNA, constructed in lambda ZAPII, was screened for alpha-D-galactosidase activity. The DNA inserts from six galactosidase-positive clones were rescued into plasmids. Restriction digestion and Southern analysis revealed that each of the plasmids contained a common DNA sequence. The sequence of the Pseudomonas DNA in one of the plasmids revealed a single open reading frame (aga27A) of 1215 bp encoding a protein of M(r) 45900, designated alpha-galactosidase 27A (Aga27A). Aga27A exhibited extensive sequence identity with alpha-galactosidases in glycoside hydrolase 27, and appeared to be a single domain protein. The recombinant alpha-galactosidase was expressed at high levels in Escherichia coli and the biophysical properties and substrate specificity of the enzyme were evaluated. The data showed that Aga27A was a mesophilic neutral acting non-specific alpha-galactosidase. Both P. fluorescens subsp. cellulosa mannanase A (ManA) and Aga27A hydrolyse the polymeric substrate, carob galactomannan. Sequential hydrolysis with AgaA followed by ManA, or ManA followed by AgaA enhanced product release. The positive effects of sequential hydrolysis are discussed.

Asunto(s)

RESUMEN

Sleepiness occurs in almost everyone at some time during each day. If sleepiness becomes moderate to severe, it can have an impact on an individual's ability to perform tasks that are prolonged or require a high degree of concentration. Driving is a daily activity that usually involves repetitive behaviors over a prolonged period, and it may be adversely affected by an individual who is sleepy. Data from the Department of Transportation show that sleepiness and fatigue contribute to numerous accidents on the road. This article reviews information related to the effects of sleepiness on driving, the types of sleepiness, and some tools for assessing sleepiness.

Asunto(s)

RESUMEN

Decreased hepatocyte adhesion to polymeric constructs limits the function of tissue engineered hepatic assist devices. We grafted adhesion peptides (RGD and YIGSR) to polycaprolactone (PCL) and poly-L-lactic acid (PLLA) in order to mimic the in vivo extracellular matrix and thus enhance hepatocyte adhesion. Peptide grafting was done by a novel technique in which polyethylene glycol (PEG)-adhesion peptide was linked to allyl-amine coated on the surface of PCL and PLLA by pulsed plasma deposition (PPD). Peptide grafting density, quantified by radio-iodinated tyrosine in YIGSR, was 158 fmol/cm(2) on PLLA and 425 fmol/cm(2) on PCL surfaces. The adhesion of hepatocytes was determined by plating 250,000 hepatocytes/well (test substrates were coated on 12 well plates) and quantifying the percentage of adhered cells after 6 h by MTT assay. Adhesion on PCL surfaces was significantly enhanced (p < 0.05) by both YIGSR (percentage of adhered cells = 53 +/- 7%) and RGD (53 +/- 12%) when compared to control surfaces (31 +/- 8%). Hepatocyte adhesion on PLLA was significantly (p < 0.05) enhanced on PLLA-PEG-RGD surfaces (76 +/- 14%) compared to control surfaces (42 +/- 19%) and more (68 +/- 25%) but not statistically significant (p = 0.15) on PLLA-PEG-YIGSR surfaces compared to control surfaces. These results indicate that hepatocyte adhesion to PCL and PLLA based polymeric surfaces can be enhanced by a novel adhesion peptide grafting technique using pulsed plasma deposition and PEG cross-linking.

Asunto(s)

RESUMEN

To enhance the drug uptake and release capacity of silicone rubber (SR), N-isopropylacrylamide (NIPA) hydrogel particles have been incorporated into a SR membrane. The NIPA particles were thoroughly blended with uncured SR with a certain ratio at room temperature. The mixture was then cast in a Petri dish to 1 mm thickness and cured 10 hours at 90 degrees C. The SR/NIPA composite gel can absorb water approximately equal to its dry weight. Brilliant blue, used as a mock drug, was loaded into the composite gel. Drug release increased exponentially to a final value that is temperature dependent: low at T> =34 degrees C, and high at T< 34 degrees C. This finding is because the hydrophobicity of NIPA changes with temperature. Pulsed release in response to temperature switching between 20 and 39 degrees C has been achieved. Drug uptake and release capability strongly depends upon the structure of the composite gel. The optimal range of NIPA composition is between 75 and 87% by volume. In the cited range, the NIPA particles form an interconnected network that provides a channel for diffusion of drug solution. The SR/NIPA composite gel has promising attributes as a wound dressing and other uses.

Asunto(s)

RESUMEN

Cellular channels during development and after peripheral nerve injury are thought to provide guidance cues to growing axons. In tissue culture where these cues are absent, neurites from dorsal root ganglion neurons grow with a radial distribution. To induce directional axonal growth and to enhance the rate of axonal growth after injury, we have designed microfilaments of poly(L-lactide). We demonstrate that dorsal root ganglia grown on these filaments in vitro extend longitudinally oriented neurites in a manner similar to native peripheral nerves. The extent of neurite growth was significantly higher on laminin-coated filaments compared with uncoated and poly-L-lysine-coated filaments. As high as 5.8 +/- 0.2 mm growth was observed on laminin-coated filaments compared with 2.0 +/- 0.2 mm on uncoated and 2.2 +/- 0.3 mm on poly-L-lysine-coated filaments within 8 days. Schwann cells were found to grow on all types of filaments. They were, however, absent in the leading edges of growth on laminin-coated filaments. Photolysis of Schwann cells caused a significant reduction in the neurite length on all types of filaments. Laminin-coated filaments, however, induced significantly longer neurites compared with uncoated and/or poly-L-lysine-coated filaments even in the absence of Schwann cells. Our results suggest that laminin-coated poly(L-lactide) filaments are suitable for inducing directional and enhanced axonal growth. Implants designed by arranging these microfilaments into bundles should aid regenerating axons by providing guidance cues and channels to organize matrix deposition, cell migration, axon growth, and improve functional recovery.

Asunto(s)

Asunto(s)

RESUMEN

We employed gamma scintigraphy to quantify the transient accumulations of platelets in pump-oxygenator systems employed in cardiopulmonary bypass (CPB). A flat sheet microporous polypropylene membrane oxygenator (Cobe Duo) was employed, with and without siloxane/caprolactone oligomer coating (SMA) (n = 8 each). The effect of nitric oxide gas infusion on platelet deposition was also evaluated for the uncoated Cobe Duo system (n = 10 each). Scintigraphic images of radiolabelled cells were obtained and converted to numbers of all platelets, labeled and unlabeled, adhering to the pump and oxygenator surfaces. These numbers were compared, by study group, for a 90-min period of normothermic CPB in the adult pig, employing standard prime and anticoagulation regimens. Platelets adhered in large numbers to control oxygenators, reaching maxima (> 20% of the circulating platelet mass) 30 min following institution of CPB, and decreasing for the duration of CPB. SMA treatment significantly decreased platelet adhesion following a 5-10-min transient accumulation period. Nitric oxide infusion significantly reduced platelet adhesion throughout the CPB period. Platelet accumulations on the high fluid shear centrifugal pump surfaces increased monotonically to maxima at about the same time as for the oxygenators, but did not decrease thereafter. Higher platelet surface densities were observed on the centrifugal pump surfaces than on the oxygenator surfaces. CPB with the untreated circuit tended to reduce circulating platelet counts vs theoretical values based on hemodilution alone. In contrast, SMA significantly increased the circulating platelet count versus the untreated control group. These results indicate that platelet adherence to the foreign surfaces of CPB equipment are influenced in characteristic ways by time and fluid shear. SMA treatment and nitric oxide infusion both reduce platelet adhesion to oxygenator surfaces. SMA treatment spares these cells for the circulation.

Asunto(s)

RESUMEN

The use of intravascular stents as an adjunct for percutaneous transluminal revascularization is limited by two principal factors, acute thrombosis and neointimal proliferation, resulting in restenosis. To overcome these limitations, we have investigated the potential of microporous bioresorbable polymer stents formed from poly(L-lactic acid) (PLLA)/poly(epsilon-caprolactone) (PCL) blends to function both to provide mechanical support and as reservoirs for local delivery of therapeutic molecules and particles to the vessel wall. Tubular PLLA/PCL stents were fabricated by the flotation-precipitation method, and helical stents were produced by a casting/winding technique. Hybrid structures in which a tubular sheath is deposited on a helical skeleton were also generated. Using a two-stage solvent swelling technique, polyethylene oxide has been incorporated into these stents to improve hydrophilicity and water uptake, and to facilitate the ability of these devices to function as drug carriers. Stents modified in this manner retain axial and radial mechanical strength sufficient to stabilize the vessel wall against elastic recoil caused by vasoconstrictive and mechanical forces. Because of the potential of direct gene transfer into the vessel wall to ameliorate thrombosis and neointimal proliferation, we have investigated the capacity of these polymer stents to function in the delivery of recombinant adenovirus vectors to the vessel wall. In vitro, virus stock was observed to readily absorb into, and elute from these devices in an infectious form, with suitable kinetics. Successful gene transfer and expression has been demonstrated following implantation of polymer stents impregnated with a recombinant adenovirus carrying a nuclear-localizing betaGal reporter gene into rabbit carotid arteries. These studies suggest that surface-modified polymer stents may ultimately be useful adjunctive devices for both mechanical support and gene transfer during percutaneous transluminal revascularization.

Asunto(s)

RESUMEN

OBJECTIVE: Reliable closed loop infusion systems for regulating paralysis level can be a great convenience to the anesthesiologists in automating their task. This paper describes the in vivo performance evaluation of a self-tuning controller that is designed to accommodate large variations in patient drug sensitivity, drug action delays and environmental interfering noise. METHODS: The infusion system was evaluated in six adult mongrel dogs. Following the manual induction of paralysis by an anesthesiologist, the controller regulated the infusion of vecuronium to maintain a desired level of paralysis. The integrated EMG response of the hypothenar muscle to a train-of-four stimulation of the ulnar nerve quantified the depth of paralysis. The controller's robustness was tested by contaminating the sensed twitch signal with electrocautery noise and electrode disconnection. RESULTS: The controller reached the initial level of paralysis of 100% in about 4.0 minutes and arrived at the desired level of 90% with an overshoot of 6.38% (+/-6.82). It maintained the desired level of paralysis with a 2.04% (+/-1.20) mean offset at 90% and 0.4% (+/-0.5) mean offset at 80% steady state level, respectively. The mean infusion rate to sustain 90% and 80% paralysis were 2.70 (+/-2.05) and 2.15 (+/-2.57) ((mg/kg)/min), respectively. CONCLUSIONS: The system adapted to a large variation in the sample subject drug sensitivity. It remained stable despite large amplitude disturbances and maintained the paralysis at the desired level following the removal of the disturbances.

Asunto(s)

Asunto(s)

RESUMEN

Membrane oxygenator designs were examined with particular attention to the influence of radial and axial flow around windings of microporous polypropylene hollow fibers. Oxygen transfer performance was calculated, employing the Mockros-Leonard modified heat transfer analysis and Curtis-Eberhart normalization methods. Flow through an Avecor Affinity oxygenator was imaged by gamma scintigraphy using a bolus injection of 99mTc-DTPA. Experimental mass transfer correlations were developed for this oxygenator using saline. The oxygen exchange of the Avecor Affinity was slightly less than that for the Medtronic Maxima or COBE Optima models, which are based on similar designs.

Asunto(s)

RESUMEN

The authors employed gamma scintigraphy to quantify the post bypass accumulations of platelets and neutrophils in the lung, liver, and heart of adult pigs subjected to a standard 90 min regimen of normothermic cardiopulmonary bypass (CPB). Coated and uncoated microporous polypropylene oxygenator circuits were studied for Cobe Duo (Arvada, CO) oxygenators (amphophilic silicone-caprolactone oligomer [SMA] coating, n = 8 each) and Medtronic Maxima (Irvine, CA) oxygenators (Carmeda heparin coating, n = 5 each). Images of cells in the organs (deposited + blood pool) were corrected for tissue absorption and other factors and compared for a 2 hr period post CPB, using repeat measures ANOVA and rank tests. Platelet accumulations in internal organs correlated positively with whole blood platelet counts and negatively with platelet deposits in oxygenators during CPB. In general, uncoated CPB circuits significantly reduced platelet and neutrophil accumulations in lung, liver, and heart versus preCPB controls for the post CPB interval, for both systems. The SMA treatment significantly increased platelet accumulations versus uncoated controls in lung, liver, and heart for the 2 hr period, including the majority of the post CPB sampling intervals; platelet densities did not reach preCPB levels. Neutrophil accumulations were unaffected by the SMA coating. Carmeda heparin treatment significantly increased platelet accumulations in the liver, but not lung or heart. Despite preservation of circulating neutrophils observed with the Carmeda heparin treatment, neutrophil accumulations in internal organs were not elevated post CPB.

Asunto(s)

RESUMEN

Nitric oxide gas is a potent inhibitor of platelet aggregation, with an IC50 of 3.6 microM for rabbit platelets. Since the NO effect is mediated via increased cGMP, this in vitro study was undertaken to test the hypothesis that selective phosphodiesterase (PDE) inhibitors might enhance aggregation inhibition at lower NO concentrations. Because the cAMP-selective PDE III and the cGMP-selective PDE V are prominent in platelets, milrinone, a PDE III inhibitor, and zaprinast, a PDE V inhibitor, were tested alone and in the presence of NO for their effect on aggregation. Aggregometry was performed on rabbit platelet-rich plasma following addition of ADP as agonist. Milrinone alone gave an IC50 of 12.4 microM. With each agent set to give suboptimal inhibition of aggregation, the combination of milrinone (3-16 microM) and NO (2-10 microM) produced a greater effect than either agent alone. Zaprinast exhibited no effect on aggregation in concentrations up to 160 microM. However, adding zaprinast to 2 microM NO, which alone reduced aggregation approximately 30%, produced a marked synergism in the inhibitory effect up to and including no observable aggregation. These results indicate that elevation of either cAMP or cGMP is sufficient to inhibit platelet function. The platelet cAMP concentration appears high enough to be inhibitory when degradation is suppressed by milrinone. However, basal cGMP levels must be increased by NO before the zaprinast effect is observed.

Asunto(s)

RESUMEN

The authors used quantitative gamma scintigraphy to evaluate the influence of nitric oxide gas on platelet and neutrophil deposition in Cobe Duo microporous oxygenators during cardiopulmonary bypass (CPB). The effects of nitric oxide gas on circulating platelet and neutrophil counts and platelet function also were assessed. Animals were prepared by standard methods. Cells were harvested, labeled (111 In platelet and 99mTc neutrophil), infused, and recirculated. Nitric oxide gas, a guanylate cyclase pathway promoter, was infused int he Duo gas port at 500 ppm (t = 0-60 min), increased to 1,000 (t = 60-80 min), and stopped (final, 10 min). Images were taken at 10-15 min intervals during CPB. Standard isotope image corrections were made. No differences between nitric oxide gas and control experiments were observed for flow, pressure, hematocrit, or replacement volume. Nitric oxide gas infusion significantly (p < 0.05) reduced both platelet adherence to the oxygenator and in vitro platelet aggregation. Neutrophil adhesion tended to be lower, and circulating platelet and neutrophil counts tended to be higher with nitric oxide gas infusion. Results of in vitro aggregometry studies using rabbit platelets indicate that the class V phosphodiesterase inhibitor zaprinast can strongly enhance the inhibitory effects of nitric oxide. The authors conclude nitric oxide gas is a promising platelet sparing agent in the setting of CPB.

Asunto(s)

RESUMEN

Drug imbibing microporous stents are under development at a number of centers to enhance healing of the arterial wall after balloon coronary angioplasty procedures. The authors improved the mechanical strength and reservoir properties of a biodegradable microporous stent reported to this Society in 1994. A combined tubular/helical coil stent is readily fabricated by flotation/precipitation and casting/ winding techniques. A two stage solvent swelling technique allows precise adjustment of the surface hydrophilic/hydrophobic balance. These developments permit seven-fold improvement in drug capacity without significantly altering mechanical properties. Stents modified in this manner retain tensile and compressive strength and are suitable for remote deployment. Elution kinetics of these modified stents suggest they are suitable for gene delivery. Successful gene transfer and transmural expression have been demonstrated after implantation of stents impregnated with a recombinant adenovirus carrying a nuclear localizing beta-galactosidase reporter gene into rabbit carotid arteries. These studies suggest that surface modified, bioresorbable polymer stents ultimately may be useful adjunctive devices for gene transfer during percutaneous transluminal revascularization.

Asunto(s)