RESUMEN
We report a new single-step method to directly imprint nanometer-scale structures on photoreactive organic semiconductors. A surface relief grating is spontaneously formed when a light-emitting, liquid crystalline, and semiconducting thin film is irradiated by patterned light generated using a phase mask. Grating formation requires no postannealing nor wet etching so there is potential for high-throughput fabrication. The structured film is cross-linked for robustness. Gratings deeper than the original film thickness are made with periods as small as 265 nm. Grating formation is attributed to mass transfer, enhanced by self-assembly, from dark to illuminated regions. A photovoltaic device incorporating the grating is discussed.
Asunto(s)
Cristalización/métodos , Cristales Líquidos/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Nanotecnología/instrumentación , Fotograbar/métodos , Semiconductores , Diseño de Equipo , Análisis de Falla de Equipo , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
BACKGROUND AND OBJECTIVE: To demonstrate suitability of moiré interferometry to assess and quantify laser-induced shrinkage of scleral collagen for buckling procedures. MATERIALS AND METHODS: Scleral buckling of human cadaver eyes was investigated using a Coherent Ultrapulse CO2 laser. Projection moiré interferometry was employed to determine the out-of plane displacement produced by laser exposure, and in-situ optical microscopy of reference markers on the eye was used to measure in-plane shrinkage. RESULTS: Measurements based on moiré interferometry allow a three dimensional view of shape changes in the eye surface as laser treatment proceeds. Out-of-plane displacement reaches up to 1.5 mm with a single laser spot exposure. In-plane shrinkage reached a maximum of around 30%, which is similar to that reported by Sasoh et al (Ophthalmic Surg Lasers. 1998;29:410) for a Tm:YAG laser. CONCLUSION: The moiré technique is found to be suitable for quantifying the effects of CO2 laser scleral shrinkage and buckling. This can be further developed to provide a standardized method for experimental investigations of other laser sources for scleral shrinkage.