RESUMEN

OBJECTIVE: To compare the safety and clinical efficacy of freehand and 3D printing navigation template assisted screw placement in patients with old odontoid fractures of typeⅡ. METHODS: Total of 38 patients with old odontoid fractures of typeⅡwere treated from November 2018 to December 2022, all of which presented as chronic neck pain. According to the different methods of screw insertion into the pedicle, the patients were divided into a navigation template group and a freehand group. In the navigation template group, there were 17 patients including 9 males and 8 females with an average age of (51.30±13.20) years old, disease duration was (22.18±7.59) months. In the freehand group, there 21 patients including 7 males and 14 females with an average age of (49.46±11.92) years old, disease duration was (19.52±9.17) months. The intraoperative blood loss, operation time, and postoperative drainage output were recorded and compared between two groups. The accuracy of screw placement was evaluated by CT scan. Before operation and 1 year after operation, cervical pain was assessed by visual analogue scale(VAS), neurological changes were evaluated by the Japanese Orthopaedic Association (JOA) score, and the degree of spinal cord injury was assessed by the American Spinal Injury Association (ASIA) injury scale. RESULTS: All patients were followed up for (25.31±1.21) months. The operation time of template group (112.00±20.48) min had significantly shorter than that of the freehand group(124.29±15.24) min(P<0.05), while there were no significant differences between two groups in terms of intraoperative blood loss, postoperative drainage, and hospital stay(P>0.05). At 1 year after operation, in template group and freehand group, the VAS [(2.88±0.86), (2.90±0.83)] and JOA [(14.94±1.82), (14.62±2.19)] improved with preoperative [VAS(4.71±0.92), (4.86±0.79) and JOA (12.18±2.30), (11.95±2.31)](P<0.05), with no significant difference between two groups (P>0.05). No significant improvement was observed in ASIA grading in either group at 1 year after operation(P>0.05), and there was no significant difference between two groups(P>0.05). The template group had significantly better accuracy of screw placement in the pedicle of the axis than the freehand group (P<0.05), while no significant difference was observed between two groups in the accuracy of screw placement in the pedicle of the atlas (P>0.05). CONCLUSION: In the treatment of typeⅡold odontoid fractures with posterior pedicle screw fixation, 3D printing navigation template screw placement can significantly shorten the operation time, achieve similar clinical efficacy as free-hand screw placement, and significantly improve the accuracy of screw placement in the pedicle of the axis.

Asunto(s)

RESUMEN

OBJECTIVE: Screw loosening is a common complication of pedicle screw internal fixation surgery. This study aimed to investigate whether the application of a porous scaffold structure can increase the contact area between screws and bone tissue by comparing the bone ingrowth and screw-bone interface of porous scaffold core pedicle screws (PSCPSs) and hollow lateral hole pedicle screws (HLHPSs) in the lumbar spine of Bama pigs. METHODS: Sixteen pedicle screws of both types were implanted into the bilateral pedicles of the L1-4 vertebrae of 2 Bama pigs. All Bama pigs were sacrificed and the lumbar spine was freed into individual vertebrae at 16 weeks postoperatively. After the vertebrae were made into screw-centered specimens, micro-computed tomography analysis and histological observation were performed to assess the screw-bone interface and bone growth around and within the screws. RESULTS: We found that the bone condition around PSCPSs and HLHPSs did not show significant differences on micro-computed tomography three-dimensional reconstruction images. CT transverse views showed different bone growth inside the 2 screws. In PSCPSs, bone tissue was seen to fill the internal pores and was evenly distributed around each strut. Inside HLHPSs, bone growth was confined to 1 side of the screw and did not fill the entire cavity. Osteometric analysis showed that bone volume fraction and trabecular number, the parameters representing bone mass, were higher in PSCPSs than in HLHPSs. These differences were not statistically significant (P > 0.05). Histological observations visualized that the osseointegration within PSCPSs was superior to that of HLHPSs, and the tight integration of bone tissue with the porous scaffold resulted in a larger screw-bone integration area in PSCPSs than in HLHPSs. CONCLUSIONS: Compared with HLHPSs, PSCPSs possessing a porous scaffold core could promote bone ingrowth and osseointegration, resulting in an effective enhancement of the combined area of the screw-bone interface.

RESUMEN

Background: The adzuki bean is a typical short-day plant and an important grain crop that is widely used due to its high nutritional and medicinal value. The adzuki bean flowering time is affected by multiple environmental factors, particularly the photoperiod. Adjusting the day length can induce flower synchronization in adzuki bean and accelerate the breeding process. In this study, we used RNA sequencing analysis to determine the effects of different day lengths on gene expression and metabolic characteristics related to adzuki bean flowering time. Methods: 'Tangshan hong xiao dou' was used as the experimental material in this study and field experiments were conducted in 2022 using a randomized block design with three treatments: short-day induction periods of 5 d (SD-5d), 10 d (SD-10d), and 15 d (SD-15d). Results: A total of 5,939 differentially expressed genes (DEGs) were identified, of which 38.09% were up-regulated and 23.81% were down-regulated. Gene ontology enrichment analysis was performed on the target genes to identify common functions related to photosystems I and II. Kyoto Encyclopedia of Genes and Genomes enrichment analysis identified two pathways involved in the antenna protein and circadian rhythm. Furthermore, florescence was promoted by down-regulating genes in the circadian rhythm pathway through the blue light metabolic pathway; whereas, antenna proteins promoted flowering by enhancing the reception of light signals and accelerating electron transport. In these two metabolic pathways, the number of DEGs was the greatest between the SD-5d VS SD-15d groups. Real-time reverse transcription‒quantitative polymerase chain reaction analysis results of eight DEGs were consistent with the sequencing results. Thus, the sequencing results were accurate and reliable and eight genes were identified as candidates for the regulation of short-day induction at the adzuki bean seedling stage. Conclusions: Short-day induction was able to down-regulate the expression of genes related to flowering according to the circadian rhythm and up-regulate the expression of certain genes in the antenna protein pathway. The results provide a theoretical reference for the molecular mechanism of short-day induction and multi-level information for future functional studies to verify the key genes regulating adzuki bean flowering.

Asunto(s)

RESUMEN

BACKGROUND: This study aimed to evaluate the biomechanical effects of reinserted or revised subaxial cervical vertebral screws. METHODS: The first part aimed to gauge the maximum insertional torque (MIT) of 30 subaxial cervical vertebrae outfitted with 4.0-mm titanium screws. A reinsertion group was created wherein a screw was wholly removed and replaced along the same trajectory to test its maximum pullout strength (MPOS). A control group was also implemented. The second part involved implanting 4.0-mm titanium screws into 20 subaxial cervical vertebrae, testing them to failure, and then reinserting 4.5-mm revision screws along the same path to determine and compare the MIT and MPOS between the test and revision groups. RESULTS: Part I findings: No significant difference was observed in the initial insertion's maximum insertion torque (MIT) and maximum pull-out strength (MPOS) between the control and reinsertion groups. However, the MIT of the reinsertion group was substantially decreased compared to the first insertion. Moderate to high correlations were observed between the MIT and MPOS in both groups, as well as between the MIT of the first and second screw in the reinsertion group. Part II, the MIT and MPOS of the screw in the test group showed a strong correlation, while a modest correlation was observed for the revision screw used in failed cervical vertebrae screw. Additionally, the MPOS of the screw in the test group was significantly higher than that of the revision screw group. CONCLUSION: This study suggests that reinsertion of subaxial cervical vertebrae screws along the same trajectory is a viable option that does not significantly affect fixation stability. However, the use of 4.5-mm revision screws is inadequate for failed fixation cases with 4.0-mm cervical vertebral screws.

Asunto(s)

RESUMEN

OBJECTIVE: Screw loosening is a common complication of internal fixation of pedicle screw. Therefore, the development of a pedicle screw with low loosening rate and high biosafety is of great clinical significance. This study aimed to investigate whether the application of a porous scaffold structure can improve the stability of pedicle screws by comparing the biomechanical properties of novel porous scaffold core pedicle screws (PSCPSs) with those of hollow lateral hole pedicle screws (HLHPSs) in a porcine lumbar spine. METHODS: Thirty-two pedicle screws of both types were implanted bilaterally into the L1-4 vertebrae of four Bama pigs, with our newly designed PSCPSs on the right and HLHPSs on the left. All the Bama pigs were sacrificed 16 weeks postoperatively, and the lumbar spine was freed into individual vertebrae. Biomechanical properties of both the pedicle screws were evaluated using pull-out tests, as well as cyclic bending and pull-out tests, while the mechanical properties were assessed using three-point bending tests. The data generated were statistically analyzed using paired-sample t-tests and two independent sample t-tests. RESULTS: We found that the maximal pull-out forces before and after cyclic bending of the PSCPSs (1161.50 ± 337.98 N and 1075.25 ± 223.33 N) were significantly higher than those of the HLHPSs (948.38 ± 194.32 N and 807.13 ± 242.75 N) (p < 0.05, p < 0.05). In 800 cycles of the bending tests, neither PSCPS nor HLHPS showed loosening or visible detachment, but their maximal pull-out forces after cyclic bending tests decreased compared to those in cycles without cyclic bending tests (7.43% and 14.89%, respectively), with no statistical significance (p > 0.05 and p > 0.05, respectively). Additionally, both screws buckled rather than broke in the three-point bending tests, with no statistically significant differences between the maximal bending load and modulus of elasticity of the two screws (p > 0.05 and p > 0.05, respectively). CONCLUSIONS: Compared with the HLHPSs, the PSCPSs have greater pull-out resistance and better fatigue tolerance with appropriate mechanical properties. Therefore, PSCPSs theoretically have significant potential for clinical applications in reducing the incidence of loosening after pedicle screw implantation.

Asunto(s)

RESUMEN

Background: As a crucial juncture in students' educational journey, junior high school presents challenges that profoundly influence well-being and academic performance. Physical activity emerges as a pivotal factor shaping the holistic development of junior high school students. Beyond its recognized impact on physical and mental health, engaging in regular physical activity proves effective in augmenting students' adaptability to school life. Despite its importance, the mechanisms through which physical activity influences school adaptation in junior high school students remain understudied in academic research. Objective: In exploring the potential mechanisms, this study aims to validate the mediating roles of resilience and coping styles by examining the association between physical activity and school adaptation among junior high school students. Methods: This study employed cross-sectional survey approach among junior high school students in China. Through the convenience sampling, 1,488 participants aged from 12 to 16 years old (Average age = 13.59, SD = 1.017) from two Junior high schools in Changsha City, Hunan Province were recruited to complete the Physical Activity Scale, School Adaptation Questionnaire for Junior High School Students, Resilience Scale for Adolescents, and Simple Coping Styles Questionnaire. For data analysis, the SPSS 26.0 and Amos 26.0 were used for statistical processing. Results: The results showed that physical activity exhibited a significant correlation with school adaptation (r = 0.656, p < 0.001). Resilience, positive coping style and negative coping style played partial mediating roles between physical activity and school adaptation, with the effect size were 0.229, 0.170, 0.171. The chain mediation effect size of resilience and positive coping style was 0.042, while the chain mediation effect size of resilience and negative coping style was 0.050. Conclusion: Physical activity positively predicts Chinese junior high school students' school adaptation through resilience and coping styles, suggesting that junior high school students should engage in regular physical activity, so as to improve their resilience and positive coping styles, mitigating negative coping styles, thus promoting their school adaptation.

RESUMEN

The study aimed to determine the optimal entry points and trajectories for posterior subaxial cervical pedicle screw (CPS) fixation. Computed tomography (CT) and Mimics software were used to evaluate the subaxial cervical pedicle in 42 cervical spine CT scans. The width of the cervical pedicle was measured and compared at medial angulations of 30°, 35°, 40°, 45°, 50°, 55°, and 60° relative to the midline sagittal plane. Based on an observational examination of the positions of all cervical 3-dimensional models and screws, the proposed entry point for C3-7 CPS was analyzed. Although the variations in C3-6 pedicle width (PW) among 45°, 50°, and 55° were not statistically significant, they were significantly larger than the differences among 30°, 35°, 40°, and 60° angles (P < .05). The differences in C7 PW between the 30°, 35°, 40°, and 45° angles were not statistically different even though the 30°, 35°, 40°, and 45° angles were significantly bigger. (P < .05). The proposed entry point for C3-7 CPS was below the junction of the lateral and lower borders of the superior articular process joint surface. The entry point for C3-7 levels was below the junction of the lateral and lower borders of the superior articular process joint surface. The optimal medial angulation for the posterior C3-6 CPS was 45°-55° and that for the posterior C7 CPS was 30°-45°. The sagittal angle of the posterior C3-7 CPS was parallel to the corresponding upper endplate.

Asunto(s)

RESUMEN

AIM: To evaluate the safety and accuracy of C1 and C2 pedicle screw placement using a three-dimensional (3D)-printed double template and compare them with those of the conventional method in a clinical study. MATERIAL AND METHODS: DICOM format data from 60 cases with C1-C2 instability were obtained after computed tomography (CT) was performed. A total of 32 cases underwent surgery via the free-hand technique, whereas 28 cases underwent surgery via a 3D-printed "pointing-drilling" guide template. The ideal trajectory of the C1 and C2 pedicle screws was designed using a baseplate as a separate complementary template for the corresponding posterior C1-C2 anatomical surface, after which the "pointingdrilling" guide template was materialized using a 3D printing machine. The 3D-printed "pointing-drilling" guide template, which was sterilized with low-temperature plasma, was used to locate the starting point and determine the drill trajectory during surgery. The positions of the screws in the axial and sagittal planes of the CT scan were observed and categorized into four grades, after which the operative time, fluoroscopy time, and intraoperative bleeding in the two groups were compared. RESULTS: No significant difference (p > 0.05) in each screw classification grade was observed between the free-hand and "pointingdrilling" template groups; however, a significant difference was observed (p=0.048) between these two groups. A significant difference (p < 0.05) in fluoroscopy times was observed between the free-hand and "pointing-drilling" template groups. Conversely, no significant differences were observed in bleeding (p=0.491) and operative time (p=0.309) between the free-hand and "pointingdrilling" template groups. CONCLUSION: The 3D-printed "pointing-drilling" guide template technique promoted more secure C1 and C2 pedicle screw placement compared with the free-hand technique in clinics.

Asunto(s)

RESUMEN

BACKGROUND: We report an interesting case of bone resorption of vertebral bodies at the operative segment after Peek Prevail cervical interbody fusion. Instability of cervical vertebrae is likely to occur due to increased stress in Peek Prevail implant body for bone resorption. The finite element analysis was used to clarify the biomechanical effects of bone resorption and stress distribution in Peek Prevail implant body. METHODS: We reported the case of a 48-year-old male patient who underwent Peek Prevail cervical interbody fusion and exhibited bone resorption 1 month after the surgery in X-ray of cervical vertebra. The degree of bone resorption was aggravated 2 months after surgery. Bone resorption in 3 months was similar to that in 2 months. We established a 3D reconstruction of the surgical segment in this case using Mimics software (vision 20.0) to generate basic boss resorption model. We simulated models of bone resorption using Ansys 17.0. The stress distribution of the contact surface between the screw and bone was analyzed under 6 conditions: flexion, extension, left and right flexion, and left and right rotation. RESULTS: The loading conditions affected the stress distribution in the implant body. When bone resorption occurred, the stress distribution of the contact surface between screw and bone focus in the tip of the screw increased sharply. CONCLUSION: Bone resorption of vertebral bodies in the operative segment may be a potential complication after Peek Prevail cervical interbody fusion. Great attention must be paid when bone resorption was occurred in order to avoid screw loosening before vertebral fusion.

Asunto(s)

RESUMEN

RATIONALE: Andersson lesion (AL), a phenomenon initially described by Andersson nearly 80 years ago, has been the subject of extensive research and various treatment modalities. The ongoing debate surrounding the need for anterior surgery in AL cases has spurred numerous proposed approaches. Despite the demonstrated efficacy of anterior surgery in achieving fusion and stabilization, its implementation is associated with prolonged operation time and heightened intraoperative bleeding. PATIENT CONCERNS: A 32-year-old male patient presented at our hospital in February 2019 with a 2-month history of bilateral lower extremity weakness and sensory disturbances. These symptoms were exacerbated by a recent fall. DIAGNOSIS: AL conbined with ankylosing spondylitis. INTERVENTIONS: A 1-stage posterior fixation and decompression procedure was performed to ensure spinal stability, minimize deformities, and reduce surgical trauma. To achieve these goals, a 2-stage approach was employed, which included video-assisted thoracoscope-guided vertebrectomy, spinal canal decompression, and bone graft fusion. OUTCOMES: No recurrences of significant pain, limb numbness, or other symptoms were reported, ultimately leading to an improved quality of life for the patient. LESSONS: We utilized video-assisted thoracoscopic surgery technology for anterior bone graft fusion in a patient with AL to minimize the trauma of secondary surgery. However, the 3-year follow-up showed insufficient bony fusion at the fracture site. Nevertheless, the patient maintained spinal stability with posterior internal fixation and no significant kyphosis or symptoms. Thus, standalone posterior fixation may suffice for favorable clinical outcomes in patients with AL.

Asunto(s)

RESUMEN

RATIONALE: Because of the risk of C1 to C2 instability, which would reduce the mobility of the occipito-atlanto-axis articulation, unstable C1 semi-ring fractures are typically treated with C1 to C2 or C0 to C2 fusion. The vertebral artery and spinal cord are at risk of harm during the installation of C1 pedicle screws. There is a need for a method that can maintain the occipito-atlanto-axis articulation's mobility and increase the safety of C1 pedicle screw fixation, particularly for surgeons who have less experience inserting C1 pedicle screws freehand. PATIENT CONCERNS: A 45-year-old man who had suffered a severe fall from a height of 2.5 m presented with pain in his cervical spine. Magnetic resonance imaging and computed tomography were used to diagnose unstable atlas fractures. DIAGNOSIS: According to radiographic studies, the patient had a unilateral anterior and posterior arch fracture (semi-ring fracture, Landells type II), as well as fractures and transverse ligament avulsion at the attachment site. INTERVENTIONS: We fixed the C1 directly with a pedicle screw using a navigational template. OUTCOMES: Both during and after the operation, there were no connected complications. Imaging at 12 months after surgery demonstrated that the fracture had united. The average visual analog scale score decreased from 8 before surgery to 2. LESSONS: In particular for surgeons with less experience placing freehand C1 pedicle screws, direct C1 pedicle screw fixation with the aid of a navigational template was a good option because it can preserve the mobility of the occipito-atlanto-axis articulation and improve the safety of C1 pedicle screw.

Asunto(s)

RESUMEN

OBJECTIVE: Although pedicle screws are widely used to reconstruct the stability of the spine, screw loosening is a common complication after spine surgery. The main objective of this study was to investigate whether the application of the hollow lateral hole structure had the potential to improve the stability of the pedicle screw by comparing the biomechanical properties of the novel lateral hole pedicle screws (LHPSs) with those of the solid pedicle screws (SPSs) in beagle dogs. METHODS: The cancellous bone of the distal femur, proximal femur, distal tibia, and proximal tibia were chosen as implantation sites in beagle dogs. In each of 12 dogs, four LHPSs, and four SPSs were implanted into both lower limbs. At 1, 2, and 3 months after surgery, four dogs were randomly sampled and sacrificed. The LHPS group and SPS group were subdivided into four subgroups according to the length of their duration of implantation (0, 1, 2, 3 months). The biomechanical properties of both pedicle screws were evaluated by pull-out and the cyclic bending tests. RESULTS: The results of the study showed that no significant difference was found between LHPSs (276.62 ± 50.11 N) and SPSs (282.47 ± 42.98 N) in pull-out tests at time 0 (P > 0.05). At the same time point after implantations, LHPSs exhibited significantly higher maximal pullout strength than SPSs (month 1: 360.51 ± 25.63 vs 325.87 ± 28.11 N; month 2: 416.59 ± 23.78 vs 362.12 ± 29.27 N; month 3: 447.05 ± 38.26 vs 376.63 ± 32.36 N) (P < 0.05). Moreover, compared with SPSs, LHPSs withstood more loading cycles (month 2: 592 ± 21 vs 534 ± 48 times; month 3: 596 ± 10 vs 543 ± 59 times), and exhibiting less displacement before loosening at month 2 (1.70 ± 0.17 vs 1.96 ± 0.10 mm) and 3 (1.69 ± 0.19 vs 1.92 ± 0.14 mm) (P < 0.05), but no significant difference in time 0 and month 1 (P > 0.05). CONCLUSIONS: The pedicle screw with the hollow lateral hole structure could allow bone to grow into the inner architecture, which improved biomechanical properties by extending the contact area between screw and bone tissue after implantation into the cancellous bone. It indicated that LHPS could reduce loosening of the pedicle screws in long term after surgery.

Asunto(s)

RESUMEN

Investigating starch properties of different adzuki beans provides an important theoretical basis for its application. A comparative study was conducted to evaluate the starch content, processing, digestion, and structural quality of 12 adzuki bean varieties. The variation ranges of the 12 adzuki bean varieties with specific analyzed parameters, including the amylose/amylopectin (AM/AP) ratio, bean paste rate, water separation rate, solubility, swelling power and resistant starch (RS) content level, were 5.52-39.05%, 44.7-68.2%, 45.56-54.29%, 6.79-12.07%, 11.83-15.39%, and 2.02-14.634%, respectively. The crystallinity varied from 20.92 to 37.38%, belonging to type BC(The starch crystal type is mainly type C, supplemented by type B). In correlation analysis, red and blue represent positive and negative correlation, respectively. Correlation analysis indicated that the termination temperature of adzuki bean starch was positively correlated with AM/AP ratio. Therefore, the higher the melting temperature, the better the freeze-thaw stability. The 12 varieties were divided into Class I, Class II, and Class III by cluster analysis, based on application field. Class I was unsuitable for the diabetics' diet; Class II was suitable for a stabilizer; and Class III was suitable for bean paste, mixtures, and thickeners. The present study could provide a theoretical basis for their application in the nutritional and nutraceutical field.

RESUMEN

The flowering characteristics of adzuki bean are influenced by several environmental factors. Light is an important ecological factor that induces flowering in adzuki bean, but to date, there have been few reports on the transcriptomic features of photoperiodic regulation of adzuki bean flowering. This study is based on RNA sequencing (RNA-seq) techniques to elucidate the expression of light-related regulatory genes under short-day photoperiod inducement of adzuki bean flowering, providing an important theoretical basis for its accelerated breeding. Short-day photoperiod inducement of 10 h was conducted for 5 day, 10 day, and 15 day periods on "Tang shan hong xiao dou" varieties, which are more sensitive to short-day photoperiod conditions than the other varieties. Plants grown under natural light (14.5 h) for 5 days, 10 days, and 15 days were used as controls to compare the progress of flower bud differentiation and flowering characteristics. The topmost unfolded functional leaves were selected for transcriptome sequencing and bioinformatics analysis. The short-day photoperiod inducement promoted flower bud differentiation and advanced flowering time in adzuki bean. Transcriptomic analysis revealed 5,608 differentially expressed genes (DEGs) for the combination of CK-5d vs. SD-5d, CK-10d vs. SD-10d, and CK-15d vs. SD-15d. The three groups of the DEGs were analyzed using the Gene Ontology (GO) and the Kyoto Encyclopedia of Genomes and Genomes (KEGG) databases; the DEGs were associated with flowering, photosystem, and the circadian rhythm and were mainly concentrated in the hormone signaling and metabolism, circadian rhythm, and antenna protein pathways; So, 13 light-related genes across the three pathways were screened for differential and expression characteristics. Through the functional annotations of orthologs, these genes were related to flowering, which were supposed to be good candidate genes in adzuki bean. The findings provide a deep understanding of the molecular mechanisms of adzuki bean flowering in response to short-day photoperiod inducement, which laid a foundation for the functional verification of genes in the next step, and provide an important reference for the molecular breeding of adzuki bean.

RESUMEN

BACKGROUND: To retrospectively compare clinical and radiological results of long-segment fixation (LF) and six-screw short-segment fixation combined with kyphoplasty (SSFK) for osteoporotic thoracolumbar burst fracture (OTBF). METHODS: Forty patients affected by OTBF with mean age of 61.85 years were included in this study. The mean follow-up period was 13.63 months. Twenty-four patients were treated by SSFK, and 16 patients were treated by LF. Clinical outcomes, radiological parameters and complications were assessed and compared. RESULTS: The mean operative time and blood loss were 89.71 ± 7.62 min and 143.75 ± 42.51 ml for SSFK group, respectively; 111.69 ± 12.25 min (P < 0.01) and 259.38 ± 49.05 ml (P < 0.01) for LF group, respectively. The two groups were similar in terms of preoperative radiological and clinical results. Compared with preoperative values, both groups achieved significant improvement in terms of VAS, ODI, Cobb angle and anterior vertebral body height (AVH) ratio at final follow-up. However, during the follow-up period, significant loss of Cobb angle and AVH ratio were observed for both groups. Five cases (20.83%) of asymptomatic cement leakage were observed in SSFK group. One case of implant failure and two cases of adjacent or non-adjacent vertebral fractures were observed in LF group. CONCLUSIONS: Both SSFK and LF are safe and effective for treatment of OTBF. Comparatively, SSFK is less invasive and can preserve more motion segments, which may be a more valuable surgical option in some elderly patients. A high-quality randomized controlled study is required to confirm our finding in the future.

Asunto(s)

RESUMEN

OBJECTIVE: To explore the clinical characteristics and the short-term efficacy of posterior operation for traumatic lumbar spondylolisthesis. METHODS: All 28 patients (between January 2013 and June 2018) were treated with lumbar pedicle screw fixation combined with posterior intervertebral fusion. The clinical data and imaging materials of these patients were retrospectively analyzed. RESULTS: The mean follow-up period was 24.3 months (12-36 months). The average VAS score and JOA score were significantly improved after surgery, and the difference was statistically significant (P<0.05).The last follow-up X-ray showed that 16 cases were degree 0 and 12 cases were degree I according to Meyerding grading, which were statistically improved compared with preoperative. Postoperative CT indicated lumbar internal fixation well, and the lumbar fusion rate was 100%. The Frankel grading of neurological function was significantly improved compared with preoperative. CONCLUSION: Acute traumatic lumbar spondylolisthesis is caused by severe trauma and mostly occurred at L4/L5 and L5/S1 level. Early posterior reduction, decompression and intervertebral fusion can achieve satisfactory clinical and radiological outcome.

Asunto(s)

Asunto(s)

RESUMEN

BACKGROUND: There are various posterior fixations utilized with transforaminal lumbar interbody fusion (TLIF). Previous studies have focused on the comparison of two fixation techniques. MATERIALS AND METHODS: Sixty five patients with single-level lumbar disease were included in this retrospective study. Group A was treated by TLIF with bilateral pedicle screw (BPS), Group B treated by TLIF with unilateral pedicle screw (UPS), and Group C treated by TLIF with UPS plus contralateral translaminar facet screw (UPSFS). The operative time, blood loss, Oswestry disability index (ODI), Japanese Orthopaedic Association Scores (JOA), and visual analog scores (VAS) were recorded. Radiographic examination was used to assess fusion rates and incidence of screw failure. RESULTS: The blood loss and operative times were 188.69 ± 37.69 ml and 132.96.5 ± 8.69 min in BPS group, 117.27 ± 27.11 ml and 99.32 ± 12.94 min in UPS group, and 121.50 ± 22.54 ml and 112.55 ± 9.42 min in UPSFS group; UPS and UPSFS were better than BPS (P < 0.05). The mean followup time was 38.2 months. Fusion rates were - BPS group: 95.6%, UPS group: 90%, UPSFS: 95% (P > 0.05). Screw and/or rod failures were found in three groups (BPS group: 1, UPS group: 2 and UPSFS: 1, P > 0.05). The average postoperative VAS, ODI, and JOA scores of BPS, UPS, and UPSFS were improved significantly in each group compared to preoperative scores (P < 0.05); there were no significant differences between any two groups at each followup time point (P > 0.05). CONCLUSION: UPSFS with TLIF is a viable treatment option that provides satisfactory clinical results; the clinical outcome and the complication rate were comparable to BPS. In addition, the invasive of UPSFS cases was comparable to UPS and better than BPS cases. For UPS, it could be used in suitable patients.

RESUMEN

OBJECTIVE: To evaluate the clinical and radiological results of patients with thoracic and lumbar fracture and dislocation treated by posterior transforaminal decompression and interbody fusion. METHODS: From June 2010 to June 2017, posterior transforaminal decompression, interbody fusion combined with pedicle screw fixation were performed in 21 patients with thoracic and lumbar fracture and dislocation. Their clinical and radiological data were collected and retrospectively analyzed, including 15 males and 6 females, aged from 25 to 58 years with an average of 45 years old. According to the criterion of American Spinal Injury(ASIA), preoperative neurological function was graded A in 3 cases, B in 7 cases, C in 6 cases, D in 4 cases and E in 1 case. Operative time and intraoperative blood loss and correlative complications were recorded. And VAS score, ODI and Cobb angle were evaluated before and after surgery. The improvement of neurological function was also analyzed at the final follow-up. Intervertebral bony fusion was observed during the follow-up by CT three-dimensional reconstruction. RESULTS: The operative time was 150 to 240 min with an average of (192±47) min. The intraoperative blood loss was 380 to 750 ml with an average of(603±120) ml. Dura sac tearing and cerebral fluid leakage occurred in 3 cases and were repaired during operation; superficial wound infection occurred in 1 case, and got healing after dressing change. The postoperative follow-up duration was 24 to 45 months with an average of(37.0±9.5) months. VAS score was improved from preoperative 8.9±0.4 to immediately postoperative 4.2±1.3(P<0.05). At the final follow-up, VAS score decreased further to 3.6±0.8. ODI was decreased from preoperative (95.30±3.52)% to (32.51±6.30)% at the final follow-up (P<0.05). Cobb angle was corrected from preoperative (21.2±8.8)° to immediately postoperative(2.3±3.1)° (P<0.05). At the final follow-up, Cobb angle was (3.2±2.5)°, showing no significant difference with immediately postoperative value. The neurological function was grade A in 3 cases, B in 3 cases, C in 5 cases, D in 6 cases and E in 4 cases at the final follow-up. All the patients got solid intervertebral bone fusion in 8 to 13 months after operation, with an average fusion time of (10.3±2.5) months. CONCLUSIONS: For the patients with thoracic and lumbar fracture and dislocation mainly involving intervertebral disc and endplate plane, posterior transforaminal decompression and interbody fusion not only is less invasive, but also can effectively reconstruct spinal three column and obtain good biomechanical stability. And, it is beneficial for the good recovery of neurological function.

Asunto(s)

Asunto(s)