RESUMEN
The determination of the levels of solar radiation incident on the terrestrial surface (W·m-2) is essential for several areas such as architecture, agriculture, health, power generation, telecommunications, and climate forecasting models. The high cost of acquiring and maintaining radiometric equipment makes it difficult to create and expand monitoring networks. It contributes to the limited Brazilian radiometric network and affects the understanding and availability of this variable. This paper presents the development of a new surface solar radiation measurement system based on silicon photodiodes (Si) with a spectral range between 300 nm and 1400 nm incorporating Internet of Things (IoT) technology with an estimated cost of USD 200. The proposed system can provide instantaneous surface solar radiation levels, connectivity to wireless networks and an exclusive web system for monitoring data. For the sake of comparison, the results were compared with those provided by a government meteorology station (INMet). The prototype validation resulted in determination coefficients (R2) greater than 0.95 while the statistical analysis referred to the results and uncertainties for the range of ±500 kJ·m-2, less than 4.0% for the developed prototypes. The proposed system operates similarly to pyranometers based on thermopiles providing reliable readings, a low acquisition and maintenance cost, autonomous operation, and applicability in the most varied climatological and energy research types. The developed system is pending a patent at the National Institute of Industrial Property under registration BR1020200199846.
Asunto(s)
Internet de las Cosas , Agricultura , Brasil , Tecnología InalámbricaRESUMEN
This paper presented an autonomous electronic system for sunshine duration (SD) monitoring based on the contrast method and developed to operate on a horizontal surface. The prototype uses four photoresistors arranged at 90° in a 20 mm diameter circumference separated by a shading structure used to create a shadow pattern on the detection element. Photoresistors are inserted in individual signal conditioning circuits based on the association between Wheatstone bridges and operational amplifiers to provide an analog signal to the microcontroller unit. The determination of SD occurs through the implementation of fuzzy logic with numerical calculation methods to estimate the probability (f) of solar disk obstruction and estimate SD values. The system does not require additional adjustments after installation or use of energy sources for operation due to the use of an internal battery with charge recovery by solar panels. Experimental results of the proposed system were validated with the ones provided by a government meteorology station. Statistical analysis of the results showed a confidence index (c) greater than 90%, with a precision of 94.26%. The proposed system is a feasible low-cost solution to the available commercial systems for the measurement of sunshine duration.