RESUMEN

This work provides the basis for implementing a continuous treatment system using a bacterial consortium for wastewater containing a pesticide mixture of iprodione (IPR) and chlorpyrifos (CHL). Two bacterial strains (Achromobacter spanius C1 and Pseudomonas rhodesiae C4) isolated from the biomixture of a biopurification system were able to efficiently remove pesticides IPR and CHL at different concentrations (10 to 100 mg L-1) from the liquid medium as individual strains and free consortium. The half-life time (T1/2) for IPR and CHL was determined for individual strains and a free bacterial consortium. However, when the free bacterial consortium was used, a lower T1/2 was obtained, especially for CHL. Based on these results, an immobilized bacterial consortium was formulated with each bacterial strain encapsulated individually in alginate beads. Then, different inoculum concentrations (5, 10, and 15% w/v) of the immobilized consortium were evaluated in batch experiments for IPR and CHL removal. The inoculum concentration of 15% w/v demonstrated the highest pesticide removal. Using this inoculum concentration, the packed-bed bioreactor with an immobilized bacterial consortium was operated in continuous mode at different flow rates (30, 60, and 90 mL h-1) at a pesticide concentration of 50 mg L-1 each. The performance in the bioreactor demonstrated that it is possible to efficiently remove a pesticide mixture of IPR and CHL in a continuous system. The metabolites 3,5-dichloroaniline (3,5-DCA) and 3,5,6-trichloro-2-pyridinol (TCP) were produced, and a slight accumulation of TCP was observed. The bioreactor was influenced by TCP accumulation but was able to recover performance quickly. Finally, after 60 days of operation, the removal efficiency was 96% for IPR and 82% for CHL. The findings of this study demonstrate that it is possible to remove IPR and CHL from pesticide-containing wastewater in a continuous system.

RESUMEN

Biosurfactant-producing bacteria can be found in contaminated environments such as biopurification systems (BPS) for pesticide treatments. A total of 18 isolates were screened to determine their ability to produce extracellular biosurfactants, using olive oil as the main carbon source. Out of the eighteen isolates, two strains (C11 and C27) were selected for biosurfactant production. The emulsification activities of the C11 and C27 strains using sunflower oil was 58.4 and 53.7%, respectively, and 46.6 and 48.0% using olive oil. Using molecular techniques and MALDI-TOF, the strains were identified as Bacillus amyloliquefaciens (C11) and Streptomyces lavendulae (C27). The submerged cultivation of the two selected strains was carried out in a 1 L stirred-tank bioreactor. The maximum biosurfactant production, indicated by the lowest surface tension measurement, was similar (46 and 45 mN/m) for both strains, independent of the fact that the biomass of the B. amyloliquefaciens C11 strain was 50% lower than the biomass of the S. lavendulae C27 strain. The partially purified biosurfactants produced by B. amyloliquefaciens C11 and S. lavendulae C27 were characterized as a lipopeptide and a glycolipid, respectively. These outcomes highlight the potential of the selected biosurfactant-producing microorganisms for improving pesticides' bioavailability and therefore the degradational efficacy of BPS.

RESUMEN

Giant squid hydrolysate (GSH) elaborated from different batches from a fishing company was evaluated for cadmium removal. Fixed-bed column packed with iminodiacetic resin as adsorbent was used. GSH solution at different cadmium concentrations were fed in the fixed-bed column and breakthrough curves were evaluated. A high degree of metal removal from the solution was achieved and the saturation point (Ce/C0 ≤ 0.8) was achieved more quickly at higher concentrations of cadmium. The maximum capacity of adsorption (q0) was obtained using the Thomas model, where 1137.4, 860.4, 557.4, and 203.1 mg g-1 were achieved using GSH with concentrations of 48.37, 20.97, 12.13, and 3.26 mg L-1, respectively. Five cycles of desorption of the resin with HCl (1 M) backflow and regeneration with NaOH (0.5 M) were also evaluated, where no significant differences (p-value > 0.05) were observed between each cycle, with an average of 935.9 mg g-1 of qmax. The in-series columns evaluated reached a total efficiency of 90% on average after the third column in GSH with a cadmium concentration of 20.97 mg L-1. This kind of configuration should be considered the best alternative for cadmium removal from GSH. Additionally, the chemical composition of GSH, which was considered a quality parameter, was not affected by cadmium adsorption.

Asunto(s)

RESUMEN

Background: The biobed is a simple biopurification system used to prevent the point-source pesticide contamination that occurs at farm level. The typical composition of the biomixture used in this system is soil, peat and straw in volumetric proportions of 1:1:2. The principal component is straw due to its positive effects on biological activity and thus pesticide degradation. However, access to straw can be limited in some regions, so it must be replaced by other more readily available lignocellulosic residues. Results: Therefore, two alternate lignocellulosic materials (barley husks and pine sawdust) were evaluated as partial substitutes for straw. The degradation of a repeatedly applied mixture of six pesticides by these alternates was assessed. The microbial respiration and fluorescein diacetate (FDA) hydrolysis activity were also assessed. The results showed that the highest degradation efficiency was found in mixtures containing straw and barley husks. Each biomixtures tested achieved a high degradation (50 to 90%) of all the pesticides used except iprodione. Repeated applications of pesticides resulted in a slowing of the degradation rate of all pesticide types in all biomixtures. FDA activity and microbial respiration were higher in the biomixtures containing barley husks and straw compared to the mixture with pine sawdust, a result consistent with the pesticide degradations observed. Conclusions: This paper demonstrates that the straw in the traditional biomixture can be partially replaced by other lignocellulosic materials to efficiently degrade a mixture of pesticides, even when the pesticides are added in successive applications and high concentrations.

Asunto(s)

RESUMEN

Six strains of white-rot fungi isolated from southern Chile were evaluated for their ergosterol/biomass correlation and ligninolytic potential in solid medium to formulate pellets for Reactive Orange 165 (RO165) decolourization. The fungus Anthracophyllum discolor was selected to formulate complex pellets (fungal mycelium, sawdust, and activated carbon), coated pellets (complex pellet + alginate) and simple pellets (fungal mycelium). The activity of ligninolytic enzymes (laccase, manganese peroxidase, manganese-independent peroxidase, and lignin peroxidase) was evaluated in both the complex and coated pellets in modified Kirk medium, and the morphology of the pellets was studied using scanning electron microscopy (SEM). Complex pellets of A. discolor showed a higher enzymatic production mainly MnP (38 U L-1 at day 15) compared to coated and simple pellets. Examinations using SEM showed that both pellets produced a black core that was entrapped by a layer of fungal mycelium. Decolourization of RO165 was demonstrated with all the pellets formulated. However, the highest and fastest decolourization was obtained with complex pellets (100 percent at day 8). Therefore, complex pellets of A. discolor can be used for the biological treatment of wastewater contaminated with RO165.

Asunto(s)

RESUMEN

The volcanic soils of southern Chile have demonstrated a high capacity to adsorb environmental pollutants, but for an industrial application, a stable solid material is necessary. The objective of this work was to produce a stable ceramic material through a process involving volcanic soil-polyurethane foam produced with recycled polyethylene terephthalate (PET)-polyols, and further thermal treatment. The selected foam formulation with 35.4% volcanic soil (< 63 microm) seems to be the most suitable for thermal treatment, with temperature steps at 700, 850, 1000 and 1200 degrees C. The porous ceramic material obtained has a stable solid form and an improved chlorophenols adsorption capacity (comparable to natural zeolites) that makes it suitable for advanced wastewater treatment and landfill leachate depuration.

Asunto(s)

RESUMEN

Wastewater from a hardboard mill characterized by a high organic content (15-30 g/L COD) was studied in a bench scale sequential aerated system in order to define a start up strategy. Inlet COD concentration varied from 0.5 to 25 g/L and the hydraulic retention time was maintained at 5 days. The sequential system proposed could reduce BOD, COD, TSS and phenol over 90 percent except when the inlet COD concentration was lower than 25 g/L.

Água residual proveniente de uma indústria de tabuleiro de fibra dura caracterizada por ter um elevado conteúdo orgânico (15-30 g/L DQO) foi estudada utilizando um sistema arejado seqüêncial de forma a definir uma estratégia de start up. A concentração de DQO na entrada do sistema variou na faixa de 0,5-25 g/L e o tempo de residência hidráulico foi mantido em 5 dias. O sistema seqüêncial proposto reduziu DBO, DQO, SST e fenol sobre 90 por cento quando a concentração de DQO na entrada foi menor a 25 g/L.

Asunto(s)