RESUMEN
Developing versatile joining techniques to weld transparent materials on a micrometer scale is of great importance in a growing number of applications, especially for the fabrication and assembly of biomedical devices. In this paper, we report on fs-laser microwelding of two transparent layers of polymethyl methacrylate (PMMA) based on nonlinear absorption and localized heat accumulation at high repetition rates. A fiber CPA laser system was used delivering 650-fs pulses at 1030 nm with repetition rates in the MHz regime. The laser-induced modifications produced by the focused beam into the bulk PMMA were firstly investigated, trying to find a suitable set of process parameters generating continuous and localized melting. Results have been evaluated based on existing heat accumulation models. Then, we have successfully laser welded two 1-mm-thick PMMA layers in a lap-joint configuration. Sealing of the sample was demonstrated through static and dynamic leakage tests. This fs-laser micro-welding process does not need any pre-processing of the samples or any intermediate absorbing layer. Furthermore, it offers several advantages compared to other joining techniques, because it prevents contamination and thermal distortion of the samples, thus being extremely interesting for application in direct laser fabrication of microfluidic devices.
RESUMEN
We study the incubation effect during laser ablation of stainless steel with ultrashort pulses to boost the material removal efficiency at high repetition rates. The multi-shot ablation threshold fluence has been estimated for two pulse durations, 650-fs and 10-ps, in a range of repetition rates from 50 kHz to 1 MHz. Our results show that the threshold fluence decreases with the number of laser pulses N due to damage accumulation mechanisms, as expected. Moreover, approaching the MHz regime, the onset of heat accumulation enhances the incubation effect, which is in turn lower for shorter pulses at repetition rates below 600 kHz. A saturation of the threshold fluence value is shown to occur for a significantly high number of pulses, and well fitted by a modified incubation model.
RESUMEN
We report on the instantaneous detection of the ablation rate as a function of depth during ultrafast microdrilling of metal targets. The displacement of the ablation front has been measured with a sub-wavelength resolution using an all-optical sensor based on the laser diode self-mixing interferometry. The time dependence of the laser ablation process within the depth of aluminum and stainless steel targets has been investigated to study the evolution of the material removal rate in high aspect-ratio micromachined holes.