RESUMEN
Biochar obtained through the pyrolysis of Pongamia glabra seed cover (PGSC) at 550 °C with a heating rate of 40 °C/min was characterized and its ability to adsorb the dyes Methylene blue (MB) and Rhodamine B (RB) from aqueous solutions was investigated. The effect of pH, temperature and initial concentration of the dyes on adsorption behavior were investigated. The equilibrium sorption data were analyzed by using Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) isotherms. Equilibrium data were well fitted for D-R isotherm in case of MB and Langmuir isotherm in case of RB dyes. The kinetics of dye adsorption on PGSC biochar was well described by applying pseudo-second-order rate equations. The surface of adsorbent before and after the removal of dyes was characterized by using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis. The study suggested that PGSC biochar could be used as a highly efficient adsorbent for the removal of synthetic dyes.
Asunto(s)
Carbón Orgánico/química , Colorantes/química , Azul de Metileno/química , Pongamia , Rodaminas/química , Contaminantes Químicos del Agua/química , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Semillas , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodosRESUMEN
Fresh water streams contaminated with synthetic dye-containing effluents pose a threat to aquatic and human life either by preventing aquatic photosynthesis or by entering into the food chain. Adsorptive removal of such dyes with potent biosorbents is an important technique to reduce bioaccumulation and biomagnifications of the dyes in human life. We report use of betel nut (BN) husk and banana peel (BP), two most abundant ligno-cellulosic wastes, as efficient adsorbents for the removal of the basic dye methylene blue (MB). The adsorption by BN and BP was consistently high over wide ranges of pH and temperature, suggesting their dye removal potential in diverse conditions. Physico-chemical studies, e.g. scanning electron microscopy and Fourier transform-infrared spectroscopy studies, revealed changes in surface topology and functional moieties of BN and BP post adsorption, implying dye interaction with the biomass surface. The dye adsorption in both cases followed pseudo-second-order kinetics. While adsorption of MB by BN was better fitted with the Temkin isotherm model, adsorption with BP followed both Langmuir and Freundlich isotherm models. Our studies concluded that both adsorbents efficiently remove MB from its aqueous solution with BP proved to be marginally superior to BN.
Asunto(s)
Agricultura , Azul de Metileno/aislamiento & purificación , Temperatura , Residuos , Adsorción , Areca/ultraestructura , Biomasa , Concentración de Iones de Hidrógeno , Cinética , Microscopía Electrónica de Rastreo , Modelos Teóricos , Musa/ultraestructura , Espectroscopía Infrarroja por Transformada de Fourier , Contaminantes Químicos del AguaRESUMEN
Adsorption is an efficient way to remove synthetic dyes from industrial effluent. Here, we show mechanism of adsorptive removal of cationic dye methylene blue (MB) from its aqueous solution using dried biomass of Rhizopus oryzae as a biosorbent. The optimum pH and temperature for adsorption was found to be 7.0 and 28 °C, respectively. Scanning electron microscopy (SEM) of the biomass suggested distinct changes in surface topology post-MB adsorption, while Fourier transform infrared (FTIR) study indicated chemical interaction between the surface of the biomass and MB. Chemical modification of -OH and -C=O groups of biomass reduced the MB adsorption and corroborated with the FTIR analyses. Kinetics study revealed that the adsorption rate was fast initially and reached equilibrium at 4 h following a pseudo-second-order-kinetics. The adsorption isotherm followed Freundlich isotherm model with n value of 1.1615.The dried biomass of R. oryzae can be used as a potent biosorbent for the removal of MB.