RESUMEN

Electrochemistry and electrochemical surface plasmon resonance (SPR) spectroscopy have been applied to study the electrochemical deposition and the redox transition of poly(4-nitro-1,2-phenylenediamine) (P4NoPD) on gold disk. It was shown that SPR can be the signal transducer for the different redox states of P4NoPD. Using a model biomolecular system, involving streptavidin, biotinylated DNA, and its complementary target DNA, it was found that the presence of nitro groups in P4NoPD allows the biorecognition events to be modulated by voltages. There is minimal nonspecific binding of biomolecules on oxidized (+0.2 V) or as-prepared P4NoPD, and binding occurs more significantly on the reduced P4NoPD (-0.2 to -0.6 V) with the presence of amine groups. The electrochemical deposition of P4NoPD film was also conducted on boron-doped diamond (BDD) electrode. The stability of the reduced P4NoPD film on gold and BDD was comparatively evaluated by electrochemical impedance spectroscopy (EIS). The result showed that BDD allows the electrochemical reduction of the P4NoPD film at wider cathodic limits than gold.

RESUMEN

The reaction between silver nitrate and poly(N-vinyl-2-pyrrolidone) (PVP) in pyridine at ambient conditions could lead to the formation of spherical nanoparticles or quadrilateral and triangular silver nanoplates, depending on the silver-to-PVP ratio used. It is proposed that the spherical Ag nanoparticles, which were formed early in the reaction, were transformed into nanoplates through an Ostwald ripening process driven by the bridging flocculation of small spherical Ag nanoparticles. This unique and hitherto unreported shape evolution process was carefully followed by a combination of techniques, viz., UV-visible spectroscopy, TEM, and powder X-ray diffraction.

RESUMEN

A highly efficient phase-transfer method was developed to prepare alkylamine-stabilized nanoparticles of several noble metals. This method involved first mixing the metal hydrosols and an ethanol solution of dodecylamine and then extracting the dodecylamine-stabilized metal nanoparticles into toluene. The efficiency of this phase-transfer method was nearly 100%. Alkylamine-stabilized Ru, Pt, and Au nanoparticles 3.45, 4.33, and 7.89 nm in diameter, respectively, could be prepared this way. The self-assembly of dodecylamine-stabilized Pt and Au particles was also detected by transmission electron microscopy (TEM).

Asunto(s)

RESUMEN

Positively charged ruthenium nanoparticles were prepared by NaBH(4) reduction at room temperature and at pH values lower than 4.9. The ruthenium nanoparticles were characterized by zeta potential measurement, TEM, XPS, and XRD. Particles with a mean diameter of 1.8 nm and a standard deviation of 0.40 nm could be obtained under the experimental conditions. The surface charge on the particles is believed to originate from hydrated proton adsorption. The positively charged ruthenium nanoparticles could be used as the starting material for further functionalization by PVP, ethylenediamine, and dodecylamine.

RESUMEN

Acetate-stabilized ruthenium nanoparticles were prepared by the NaBH4 reduction of the metal precursor salt at room temperature. Nanoparticles with a mean diameter of 2.20 nm and a standard deviation of 1.03 nm could be obtained under experimental conditions. The Ru nanoparticles so obtained could be easily extracted to a toluene solution of alkylamine, giving rise to alkylamine-stabilized Ru nanoparticles with a mean diameter of 2.96 nm and a standard deviation of 0.92 nm. The new found role of acetate stabilization was used to formulate a mechanism for the formation of metal (Pt, Ru) nanoparticles in ethylene glycol. In this mechanism metal nanoparticles are stabilized in ethylene glycol by adsorbed acetate ions, which are produced as a product of the OH- catalyzed reaction between the metal precursor salt and ethylene glycol.

Asunto(s)

RESUMEN

A novel method has been developed to prepare water-dispersible ethylenediamine (en)-stabilized ruthenium nanoparticles. The procedure involves the reduction of an en-RuCl(3) complex by sodium borohydride. The Ru nanoparticles so prepared are fairly stable in water. TEM imaging shows a mean diameter of about 2.1 nm for the particles and a narrow particle size distribution.

RESUMEN

Compounds of type [(Ph3P)2AgIn(SC(O)R)4] (R = Me (1), Ph (2)) are excellent single-source precursors for AgInS2 bulk materials by pyrolysis and AgIn5S8 films by aerosol assisted chemical vapour deposition (AACVD).

RESUMEN

The compounds (Me4N)[A(M(SC(O)Ph)3)2] (A = K, M = Cd (2); A = Na, M = Hg (3); and A = K, M = Hg (4)) were synthesized by reacting the appropriate metal chloride with A+PhC(O)S- and Me4NCl in the ratios 1:3:1 and 2:6:1. The structures of these compounds were determined by single-crystal X-ray diffraction methods. All the compounds are isomorphous, isostructural, and crystallized in the space group P1 with Z = 1. Single-crystal data for 2: a = 106670(2) A, b = 111522(2) A, c = 119294(2) A, alpha = 71782(1) degrees, beta = 85208(1) degrees, gamma = 69418(1) degrees, V = 126140(4) A3, Dcalc = 1528 g cm-3. Single-crystal data for 3: a = 10840(2) A, b = 10946(4) A, c = 12006(3) A, alpha = 7218(2) degrees, beta = 8675(2) degrees, gamma = 6743(2) degrees, V = 12493(6) A3, Dcalc = 1756 g cm-3. Single-crystal data for 4: a = 104780(1) A, b = 112563(2) A, c = 119827(2) A, alpha = 71574(1) degrees, beta = 85084(1) degrees, gamma = 70705(1) degrees, V = 126523(3) A3, Dcalc = 1755 g cm-3. In the [A(M(SC(O)Ph)3)2]- anions, each M(II) atom is bonded to three thiobenzoate ligands through sulfur atoms, giving a trigonal planar MS3 geometry. The carbonyl oxygen atoms from the two [M(SC(O)Ph)3]- anions are bonded to the alkali metal atom, providing an octahedral environment. Solution metal NMR studies showed the concentration-dependent dissociation of the alkali metal ions in the trinuclear anions.

RESUMEN

The reactions of Na+ R[O]CS- (R = Me, Ph) with mixtures of CuCl and PPh3 in stoichiometric ratios yielded the compounds [Cu4(SC[O]Me)4(PPh3)4] (1), [Cu4(SC[O]Ph)4(PPh3)3] (2), [Cu2(SC[O]Me)2(PPh3)4] (3), [Cu(SC[O]Ph)(PPh3)2] (4), and [Cu2(SC[O]Ph)2(PPh3)3] (5) quantitatively. Compound 2 was also obtained from mixtures of CuCl, PPh3, and NaSC[O]Ph in the ratio 1:1:1. The analogous thioacetate compound similar to 2 and the thiobenzoate analogue of 1 could not be obtained. Attempts to prepare the unsymmetrical dimer of a thioacetate compound similar to 5 gave a mixture of 1 and 3. The structures of 1-4 have been determined by single-crystal X-ray diffraction methods. Crystal data for 1: triclinic space group Pl, a = 11.5844(3) A, b = 13.2459(3) A, c = 14.3433(3) A, alpha = 64.019(1) degrees, beta = 79.297(1) degrees, gamma = 69.426(1) degrees, V = 1850.98(7) A3, Z = 1, Dcalcd = 1.439 g.cm-3. Crystal data for 2.0.5CH2Cl2.H2O: triclinic space group P1, a = 12.4413(1) A, b = 15.5443(1) A, c = 20.4637(3) A, alpha = 94.974(1) degrees, beta = 95.976(1) degrees, gamma = 100.450(1) degrees, V = 3848.09(7) A3, Z = 2, Dcalcd = 1.416 g.cm-3. Single-crystal data for 3: monoclinic space group P2(1)/n, a = 15.2746(2) A, b = 23.2947(2) A, c = 19.0518(3) A, beta = 96.713(1) degrees, V = 6732.5(2) A3, Z = 4, Dcalcd = 1.309 g.cm-3. Crystal data for 4: triclinic space group P1, a = 10.2524(3) A, b = 12.9826(4) A, c = 14.5340(4) A, alpha = 87.723(1) degrees, beta = 75.322(1) degrees, gamma = 75.978(1) degrees, V = 1815.14(9) A3, Z = 2, Dcalcd = 1.327 g.cm-3. Compound 1, [mu 3-SC[O]Me-S)2(mu-SC[O]Me-S)2(CuPPh3)4], is a tetramer with a distorted stepladder structure in which two copper atoms are trigonally coordinated and the other two are tetrahedrally coordinated. Two bonding modes, namely, mu 3-S and mu 2-S, were observed for the Me[O]CS- anion. The structure of 2 may be described as a highly distorted cubanoid structure and formulated as [(mu 3-SC[O]Ph-S3)(mu 3-SC[O]Ph-S2,O)3(Cu)(CuPPh3)3]. In 2, three copper atoms have tetrahedral coordination geometry and one copper atom is trigonally coordinated. Unprecedented bonding modes, namely, mu 3-S, have been observed for the R[O]CS- anions, in 1 and 2 and mu 3-S2,O in 2. Compound 3, [(mu-SC[O]MeS)(mu-SC[O]Me-S,O)[Cu(PPh3)2]2] is a dimer with mu 2-S and mu 2-S,O bonding modes of Me[O]CS- ligands. Monomeric structure was found in 4 in which the copper atom has trigonal planar geometry with a very weak intramolecular interaction with O. Variable temperature 31P NMR studies in solution show the presence of various species in equilibria.