RESUMEN

Hydrogels can possess desired biochemical and mechanical properties, excellent biocompatibility, satisfactory biodegradability, and biological capabilities that promote skin repair, making them ideal candidates for skin healing dressings. Polysaccharides, such as chitosan, hyaluronic acid and sodium alginate as well as proteins, including gelatin, collagen and fibroin proteins, are biological macromolecules celebrated for their biocompatibility and biodegradability, are at the forefront of innovative hydrogel dressing development. This work first summarizes the skin wound healing process and its influencing factors, and then systematically articulates the multifunctional roles of hydrogels based on biological macromolecules (polysaccharides and proteins) as dressing in addressing bacterial infection, hemorrhage and inflammation during wound healing. Furthermore, this review explores the potential of these hydrogels as vehicles for combination therapy, by incorporating growth factors or stem cells. Finally, the article offers insights into future directions of such hydrogels in wound repair field.

RESUMEN

To fabricate multifunctional nanoparticles (NPs) based on chitosan (CS) derivative, we first prepared quaternized CS (2-hydroxypropyltrimethyl ammonium chloride CS, HTCC) via a one-step approach, then synthesized p-coumaric acid (p-CA) modified HTCC (HTCC-CA) for the first time through amide reaction, and finally fabricated a series of NPs (HTCC-CA NPs) using HTCC-CAs with different substitution degrees and sodium tripolyphosphate (TPP) by ionic gelation. Newly-prepared HTCC and HTCC-CAs were characterized by FT-IR, 1H NMR, elemental analysis (EA), full-wavelength UV scanning, silver nitrate titration, and Folin-Ciocalteu methods. DLS and TEM results demonstrated that three selected HTCC-CA NPs had moderate size (< 350 nm), good dispersion (PDI < 0.4), and positive zeta potential (11-20 mV). The HTCC-CA NPs had high antibacterial activity against six bacterial strains, and the minimum inhibitory concentration (MIC) values were almost the same as the minimum bactericidal concentration (MBC) values (250-1000 µg/mL). Also, the HTCC-CA NPs had good antioxidation (radical scavenging ratio > 65 %) and low cytotoxicity (relative cell viability >80 %) to the tested cells. Totally, HTCC-CA NPs with high antibacterial activity, great antioxidation, and low cytotoxicity might serve as new biomedical materials for promoting skin wound healing.

Asunto(s)

Quitosano , Nanopartículas , Quitosano/química , Antioxidantes/farmacología , Antioxidantes/química , Espectroscopía Infrarroja por Transformada de Fourier , Antibacterianos/farmacología , Nanopartículas/química

RESUMEN

In this study, porous hemostatic sponges (CGS1, CGS2 and CGS3) with proper absorption (38-43×) and air permeability (2214 g/m2·day) were prepared from l-glutamine-modified chitosan (CG), tannic acid-modified gelatin (GTA), and oxidized dextran (ODEX) by Schiff base crosslinking reaction. Among them, CGS2 was proved to have high porosity (88.98 %), durable water retention (>6 h), strong antibacterial activity, proper mechanical quality, and suitable tissue adhesion. In addition, CGS2 had good biocompatibility, mainly manifested in low hemolysis rate (<0.4 %), low cytotoxicity (relative cell activity>90 %), and good biodegradability in vitro. The hemostatic time and blood loss in CGS2 group were much lower than those in commercial gelatin sponge group in three animal injury models. Moreover, the activated partial thromboplastin time (APTT) and the prothrombin time (PT) results indicated that CGS2 promoted coagulation by activating the endogenous coagulation pathway. These results suggested that CGS2 had great potential for rapid hemostasis and avoidance of wound infection.

Asunto(s)

Quitosano , Hemostáticos , Animales , Hemostáticos/farmacología , Quitosano/farmacología , Gelatina/farmacología , Dextranos/farmacología , Glutamina , Hemostasis , Vendajes

RESUMEN

In this study, a new type of biodegradable, injectable, self-healing, and low-toxic CMCSH, formed by N, O-carboxymethyl chitosan-heparin (CMCS-Hep) and carboxymethyl cellulose-aldehyde (CMC-A), was designed to deliver drug for promoting the progress of the diabetic wound healing. CMCS was modified with Hep for the first time to synthesize CMCS-Hep, and CMC-A was synthesized by the periodate oxidation method. First, SOD encapsulated in the CMCSH was applied to the diabetic wound bed to moderate the microenvironment, then rhEGF retained in the CMCSH was sustainedly released to the wound area. These results indicated that the dual-drug delivery system had the ability to improve drug availability, promote cell migration and proliferation, reduce DNA damage, shorten the inflammatory period, and accelerate the deposition of collagen fibers and the formation of blood vessels in the model with diabetic skin injury, suggesting that CMCSH as drug carriers had positive effects on diabetic wound healing.

Asunto(s)

Quitosano , Diabetes Mellitus , Carboximetilcelulosa de Sodio/farmacología , Quitosano/farmacología , Humanos , Hidrogeles/farmacología , Cicatrización de Heridas

RESUMEN

This work aims to fabricate multifunctional hemostatic sponges (C-ODs). Porous C-ODs were first constructed by using capric acid-modified chitosan (CSCA) and oxidized dextrans (ODs) with different oxidation degrees. Batches of experiments showed that (i) CSCA (33.39% of grafting degree), ODs, and C-ODs (100-200 µm in pore size) were synthesized, evidenced by FT-IR, 1H NMR, elemental analysis, hydroxylamine hydrochloride titration, and SEM results; (ii) among C-ODs, C-OD2 had appropriate porosity (85.0%), swelling (20 times its dry weight), absorption, water retention, water vapor transmission, and mechanical properties; (iii) C-OD2 possessed low toxicity (relative cell viability > 86%), low hemolysis rate (0.65%), suitable tissue adhesion (4.74 kPa), and strong antibacterial efficacy (five strains); and (iv) C-OD2's dynamic blood clotting was within 30 s. In three animal injury models, C-OD2's hemostasis time and blood loss were fairly lower than commercial gelatin sponge. Totally, C-OD2 might serve as an ideal hemostatic dressing.

RESUMEN

Glutaraldehyde-crosslinked chitosan microparticles (CGP) prepared via the inversed-phase emulsification were successively modified by epichlorohydrin (ECH) and amidinothiourea (AT) as novel adsorbent (CGPET) for selective removal of Hg(II) in solution. FTIR, EA, XPS, SEM-EDX, TG, DTG, and XRD results indicated that CGPET had ample -NH2 and CS, relative rough surface, mean diameter of ~40 µm, great thermal stability, and crystalline degree of 2.4%, beneficial to the uptake of Hg(II). The optimum parameters (pH 5, dosage 1 g/L, contact time 4 h, and initial concentration 150 mg/L) were acquired via batches of adsorption experiments. Adsorption behavior was well described by the Liu isothermal and pseudo-second-order kinetics models, and the maximum adsorption capacity was 322.51 mg/g, surpassing many reported adsorbents. Regeneration and coexisting-ion tests demonstrated that CGPET had outstanding reusability (Rr > 86.89% at the fifth cycle) and selectivity (Rs > 93%). Besides, its potential adsorption sites and mechanisms were proposed.

RESUMEN

Skin wound dressing materials, which can accelerate wound healing and have the synthetic advantages of simplicity, environmental safety, and resource abundance, are becoming a hot topic of research now. Following such a research trend, we prepared novel decanoic acid functionalized chitosan (CSDA) with good solubility by acylation via a facile one-step method. FTIR, 1H NMR, and UV-Vis results demonstrated that alkyl chains were successfully grafted onto C2 positions of chitosan (CS) skeleton through acylation. XRD patterns implied that the crystallinity of CSDA greatly declined due to the introduction of alkyl moieties, favorable for improving water solubility. Conductometric titration results showed that the degrees of substitution of CSDA, CSDA1, and CSDA2 were 41.42, 26.12, and 23.17%, respectively. MTT assay and hemolysis experiments illustrated that all the CSDA samples tested in this work possessed good hemocompatibility (hemolysis rate < 2%) and excellent cytocompatibility (relative cell viability >75%) toward L929 cells. Moreover, CSDA-soaked gauze dressings and full-thickness excisional wound models were employed to estimate the feasibility of CSDA as wound dressing material, and the results displayed that CSDA with the degree of substitution of 41.42% could enhance the wound healing rate to 100% on day 16. Altogether, CSDA might be potential material used as wound dressing.

Asunto(s)

Vendajes , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/farmacología , Quitosano/síntesis química , Quitosano/farmacología , Ácidos Decanoicos/química , Cicatrización de Heridas/efectos de los fármacos , Acilación , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/toxicidad , Técnicas de Química Sintética , Quitosano/química , Quitosano/toxicidad , Hemólisis/efectos de los fármacos , Masculino , Ratas , Solubilidad

RESUMEN

PEI-ECH-CMCS microspheres (MPs) were first constructed via elaborately programmed procedures. Fourier transform infrared spectroscopy, conductometric titration, Brunauer-Emmett-Teller, X-ray diffraction, pH at zero point of charge (pHzpc), scanning electron microscopy, X-ray photoelectron spectroscopy, and swelling results demonstrated that chitosan-based adsorbent had ample -NH2 and -COOH, specific surface area of 29.040 m2/g, porous 3D architectures, pHzpc of 4.2, uniform spherical surfaces, narrow size distribution (19-33 µm), and pH-responsive swelling features, advantageous to Cr(VI) and Pb(II) capture. Adsorption parameters were obtained from batch experiments and pH 3 and 5 were chosen for Cr(VI) and Pb(II) capture. Pseudo-second-order kinetic and Liu isotherm models well interpreted adsorption behavior, and thermodynamic, isotherm, and kinetic studies revealed an exothermic, spontaneous, monolayer, and chemical adsorption process. Maximum adsorption capacity for Cr(VI) or Pb(II) was 331.32 or 302.56 mg/g, exceeding CS-based adsorbents reported. Excellent reusability and feasibility were evidenced by adsorption capacity loss < 12.10% and high removal efficiency for Cr(VI) (95.79%) and Pb(II) (91.40%) in synthetic effluents. Finally, potential adsorption mechanisms were proposed.

RESUMEN

MCS-MA-TEPA microparticles, with 251.22 mg g-1 of adsorption capacity for Cd(II), higher than most of the counterparts, were first fabricated by chemical coprecipitation, spray drying, and Michael addition reaction, without any cross-linker participation. These Fe3O4-nanoparticle-embedded microparticles of 5.95 µm in size, derived from modifications by methyl acrylate (MA) and tetraethylenepentamine (TEPA) on magnetic chitosan (MCS) microparticles, were of plum-pudding-like and wrinkle-like topography portrayed by TEM and SEM. Such features were beneficial to adsorbent recycling and Cd(II) capture. BET examinations illustrated 6.084 m2 g-1 of specific surface area, 0.015 mL g-1 of pore volume, and 6.536 nm of pore diameter. FTIR, VSM, XRD, TEM-SAED, TG, and DTG characterizations were indicative of successful synthesis, satisfactory magnetism, well-defined architecture, and good thermostability. Optimal adsorption parameters for Cd(II) were determined via batch experiments. Thermodynamic parameters and adsorption data fitting implied an exothermic, spontaneous, monolayer, and chemisorption process. XPS analyses confirmed a potential adsorption mechanism that N and O atoms on microparticles chelated with Cd(II) ions in solutions. Additionally, MCS-MA-TEPA-Cd(II) microparticles were magnetically separated easily and had outstanding reusability even after five-time recycling, with a slight adsorption capability loss (< 12%). Altogether, MCS-MA-TEPA microparticles might serve as a promising adsorbent for contaminated water scavenging.

RESUMEN

The work presented here aims to fabricate dual-purpose adsorbent with adsorption selectivity for Hg(II) and antibacterial activity. TSC-PGMA-MACS microspheres were first constructed via esterification of malic acid (MA) with chitosan (CS) and through successively grafting glycidyl methacrylate (GMA) and thiosemicarbazide (TSC) onto MACS microsphere surfaces. Fourier transform infrared spectroscopy, elemental analysis, energy-dispersive X-ray spectrometry, X-ray diffraction, differential scanning calorimetry, thermogravimetry, differential thermogravimetry, scanning electron microscopy, and Brunauer-Emmett-Teller results provided ample evidence that new mesoporous adsorbent, with 35.340 m2 g-1 of specific surface area and abundant -NH2 and C═S, was successfully fabricated and had loose crystalline, thermodynamically stable, and well-defined architectures, beneficial for Hg(II) adsorption and bacterial cell killing. Optimal adsorption parameters were determined via varying pH, time, concentrations, and temperatures, and pH 6.0 was chosen as an optimal pH for Hg(II) adsorption. Adsorption behavior, described well by pseudo-second-order kinetic and Langmuir isotherm models, and thermodynamic parameters implied a chemical, monolayer, endothermic, and spontaneous adsorption process, and the maximum adsorption capacity for Hg(II) was 242.7 mg g-1, higher than most of the available adsorbents. Competitive adsorption exhibited excellent adsorption selectivity for Hg(II) in binary-metal solutions. Besides, TSC-PGMA-MACS microspheres had outstanding reusability even after five times recycling, with adsorption capability loss <14%. Several potential adsorption sites and bonding modes were proposed. Notably, TSC-PGMA-MACS microspheres before and after adsorption were of high antibacterial activity against Escherichia coli and Staphylococcus aureus (MICs, 2 and 0.25 mg mL-1), superior to CS powders, and possible antibacterial mechanisms were also summarized. Altogether, dual-purpose TSC-PGMA-MACS microspheres might be promising adsorbent for contaminated water scavenging.

RESUMEN

This work aims to synthesize poly(aminoethyl) modified chitin (PAEMC) and ascertain its antibacterial activity and mechanism. FTIR and 1H NMR results proved aminoethyl moieties were grafted to C6OH and C3OH on chitin backbone in the form of polymerization. XRD and TG/DTG analyses manifested its well-defined crystallinity and thermostability. PAEMC, with average molecular weight (MW) of 851.0 kDa, degree of deacetylation (DD) of 27.95%, and degree of substitution (DS) of 1.77, had good solubility in aqueous solutions over the pH range of 3-12, and also possessed high antimicrobial activity against Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Bacillus proteus, and Klebsiella pneumoniae, commonly causing chronic wound infections. Nucleic acid release, protein leakage, increased inner membrane permeability, and decreased cell surface hydrophobicity implied bacterial cytomembranes were substantially compromised in the presence of PAEMC. Microscopically, PAEMC visually perturbed bacteria, illustrating deformed and even collapsed morphologies. Overall, PAEMC possessed good solubility, effectively destroyed bacteria via a membrane damage mechanism, and might serve as an antibacterial agent for treatments of chronic wound infections.

Asunto(s)

Antibacterianos/síntesis química , Quitina/análogos & derivados , Etilaminas/química , Antibacterianos/farmacología , Membrana Celular/efectos de los fármacos

RESUMEN

This work aims to prepare 3,6-O-N-acetylethylenediamine modified chitosan (AEDMCS) and evaluate its potential use as an antimicrobial wound dressing material. UV, FTIR, and 1H NMR results demonstrated N-acetylethylenediamine groups were successfully grafted to C3OH and C6OH on polysaccharide skeletons. TGA, XRD, and solubility tests indicated that as compared with chitosan, AEDMCS had diminished thermostability, decreased crystallinity, and greatly improved solubility. AEDMCS, with degrees of deacetylation and substitution being respectively 90.3% and 0.72, exhibited higher antibacterial activity than chitosan against six bacteria generally causing wound infections. Meanwhile, AEDMCS had permissible hemolysis and cytotoxicity and low BSA adsorption even at a AEDMCS concentration of 25mg/mL. Acute toxicity tests showed AEDMCS was nontoxic. Moreover, the wound healing property was preliminarily evaluated, illustrating that AEDMCS enhanced wound healing rates as expected and had no significant differences as compared with chitosan. These results suggested AEDMCS might be a potential material used as antibacterial wound dressings.

Asunto(s)

Antibacterianos/farmacología , Materiales Biocompatibles/farmacología , Quitosano/análogos & derivados , Quitosano/farmacología , Etilenodiaminas/farmacología , Apósitos Oclusivos , Adsorción , Animales , Antibacterianos/síntesis química , Antibacterianos/química , Antibacterianos/toxicidad , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Materiales Biocompatibles/toxicidad , Bovinos , Quitosano/síntesis química , Quitosano/toxicidad , Etilenodiaminas/síntesis química , Etilenodiaminas/química , Etilenodiaminas/toxicidad , Femenino , Fibroblastos/citología , Fibroblastos/efectos de los fármacos , Bacterias Gramnegativas/efectos de los fármacos , Hemólisis/efectos de los fármacos , Masculino , Ratones , Conejos , Albúmina Sérica Bovina/química , Solubilidad , Staphylococcus aureus/efectos de los fármacos , Staphylococcus epidermidis/efectos de los fármacos , Agua/química , Cicatrización de Heridas/efectos de los fármacos

RESUMEN

A novel adsorbent, composed of poly(maleic acid)-grafted cross-linked chitosan microspheres (PMACCMs), was prepared via cross-linking with glutaraldehyde and modification by grafting maleic acid. FTIR, zeta potential, elemental analysis, 13C NMR, DTG, laser particle size analysis, SEM, and BET methods were applied to characterize PMACCMs, exhibiting a successful fabrication, good thermostability, and well-defined surface microstructure beneficial to Cd(II) adsorption. The effects of pH, contact time, and initial concentration on Cd(II) adsorption were also investigated, and the maximum adsorption capacity was 39.2mgg-1, indicating a great improvement as compared with that (14.5mgg-1) of cross-linked chitosan microspheres. The experimental data were well fitted with pseudo-second-order kinetic and Langmuir isotherm models. Five-cycle reusability tests demonstrated PMACCMs could be repeatedly used with a small adsorption capacity loss (<15%). Additionally, the adsorption mechanism was proposed. All the results confirmed that PMACCMs, which presented outstanding adsorption capability and reusability, could be a good candidate for wastewater purification.

RESUMEN

This work aims to synthesize a novel itaconic acid (IA) grafted carboxymethyl chitosan (PICMCS), and further fabricate its nanoparticles for potential biomedical applications. First, PICMCS was prepared via free-radical polymerization of IA monomer, in the presence of ammonium persulfate as an initiator and nitrogen as a protector. Its chemical structure was confirmed by FTIR and 1H NMR. The IA substitution degree calculated by elemental analysis data was 1.85, implying that IA was successfully grafted to carboxymethyl chitosan (CMCS). XRD and TGA patterns illustrated its well-defined crystallinity and thermostability. Second, PICMCS nanoparticles were fabricated by electrostatic attraction between carboxyl and amino groups in the absence of any additional agent, which were of obvious core-shell structures with an average particle size of 144nm and a polydispersity index of 0.11. PICMCS nanoparticles exhibited excellent physical stability after storage at 25°C for 30days, without any aggregation. PICMCS nanoparticles with high negative surface charge also indicated the good stability, especially in neutral or alkaline media. Additionally, the cytotoxicity experiments showed that either PICMCS or its nanoparticles had better cytocompatibility toward L929 cells than CMCS. These findings above suggested that PICMCS was a kind of promising material for preparing nanoparticles used in biomedical field.

Asunto(s)

Materiales Biocompatibles/química , Quitosano/análogos & derivados , Nanopartículas/química , Succinatos/química , Animales , Materiales Biocompatibles/farmacología , Línea Celular , Supervivencia Celular/efectos de los fármacos , Quitosano/química , Ensayo de Materiales , Ratones , Tamaño de la Partícula

RESUMEN

This study aims to develop new antibacterial hydrogel wound dressings composed of poly(aminoethyl) modified chitosan (PAEMCS). FTIR, 1H NMR, and elemental analysis demonstrated that PAEMCS was successfully synthesized via grafting poly(aminoethyl) groups onto hydroxyl groups on chitin first, and removing acetyl groups from the grafted polymer afterward. XRD and TGA implied its well-defined crystallinity and thermostability. Furthermore, a series of hydrogels were fabricated under the participation of dipotassium hydrogen phosphate (DHP). The gelation tests suggested that the higher concentration of PAEMCS or DHP was beneficial to the formation of hydrogels. The pH values of hydrogels at 37°C were all in the range of 7.12-7.50. The rheological tests indicated that PAEMCS-based hydrogels were of lower DHP addition and higher elasticity than CS-based hydrogels to achieve the same gelation temperature under the same polymer's concentration. Additionally, the swelling, anti-bacteria, and cytotoxicity experiments showed that PAEMCS-based hydrogels possessed excellent hygroscopicity, high antibacterial activity against E. coli, S. aureus, or S. epidermidis, and good cytocompatibility toward L929 cells or HUVECs, respectively. All the results implied that PAEMCS-based hydrogels not only maintained inherent multiple properties of chitosan but also possessed excellent antibacterial activity, and might be promising antibacterial hydrogel dressings used in wound therapy.

Asunto(s)

Vendajes/microbiología , Quitosano/síntesis química , Quitosano/farmacología , Hidrogeles/química , Polímeros/química , Cicatrización de Heridas , Antibacterianos/síntesis química , Antibacterianos/química , Antibacterianos/farmacología , Antibacterianos/toxicidad , Bacterias/efectos de los fármacos , Línea Celular , Técnicas de Química Sintética , Quitosano/química , Quitosano/toxicidad , Humanos , Concentración de Iones de Hidrógeno , Fosfatos/química , Compuestos de Potasio/química , Reología

RESUMEN

Thermosensitive hydrogels whose physiological properties are similar to extracellular matrix have been extensively used for tissue regeneration. Polysaccharides and proteins, as biocompatible substrates similar to bio-macromolecules that could be recognized by human body, are two preferred polymers for fabrication of such hydrogels. A series of novel thermosensitive hydrogels (CS-ASC-HGs) containing chitosan (CS) and acid-soluble collagen (ASC) were thus prepared, in the presence of α, ß-glycerophosphate, to mimic extracellular microenvironment for tissue regeneration. Rheological measurements demonstrated excellent thermosensitivity. FT-IR and SEM indicated CS-ASC-HGs possessed 3D porous architectures with fibrous ASC, and the molecular structure of ASC was well-maintained in hydrogels. Hemolysis, acute toxicity, and cytotoxicity tests suggested CS-ASC-HGs were of good biocompatibility. CS-ASC-HGs were able to support the survival and proliferation of L929 cells encapsulated in them. Moreover, CS-ASC-HGs had better pH stability and biocompatibility than pure CS hydrogel. These results suggested that CS-ASC-HGs could serve as promising scaffolds for tissue regeneration.

Asunto(s)

Quitosano/química , Colágeno/química , Glicerofosfatos/química , Hidrogeles , Andamios del Tejido , Animales , Materiales Biocompatibles , Línea Celular , Humanos , Ratones , Regeneración , Espectroscopía Infrarroja por Transformada de Fourier

RESUMEN

DNA/chitosan co-assemblies were initially used as nanocarriers for efficient astaxanthin encapsulation and delivery. The obtained astaxanthin-loaded DNA/chitosan (ADC) colloidal system was transparent and homogenous, with astaxanthin content up to 65µg/ml. Compared to free astaxanthin, ADC nanoparticles with an astaxanthin concentration as low as 3.35nM still showed a more powerful cytoprotective effect on H2O2-induced oxidative cell damage, and improved cell viability from 49.9% to 61.9%. The ROS scavenging efficiency of ADC nanoparticles was as high as 54.3%, which was 2-fold higher than that of free astaxanthin. Besides this, ADC nanoparticles were easily engulfed by Caco-2 cells in a short time, indicating that the encapsulated astaxanthin could be absorbed through endocytosis by intestinal epithelial cells. The improved antioxidation capability and facilitated cellular uptake enabled the ADC nanoparticles to be good candidates for efficient delivery and absorption of astaxanthin.

Asunto(s)

Antioxidantes/química , Quitosano/química , ADN/química , Portadores de Fármacos/química , Antioxidantes/metabolismo , Transporte Biológico , Células CACO-2 , Endocitosis , Humanos , Nanopartículas/química , Tamaño de la Partícula , Xantófilas/química , Xantófilas/metabolismo , Xantófilas/farmacología

RESUMEN

A novel adsorbent, CS-MA-DETA microspheres, for uptake of heavy metal ions from aqueous solutions was first fabricated via two-step grafting methyl acrylate (MA) and diethylenetriamine (DETA) onto chitosan (CS) microsphere surface in the absence of cross-linkers. CS-MA-DETA microspheres of 3.04 µm in mean diameter were of uniformly wrinkle-like topography sketched out by SEM, whose surface after decoration by MA and DETA was stable and beneficial to metal ion capture. Its chemical composition, microstructure, and thermal property were characterized by elemental analysis, FTIR, XRD, BET, and TGA techniques, and the achieved quantitative results mainly included C/N ratio (4.76), crystallinity (31.20%, 19.75% of CS), specific surface area (27.806 m2 g-1), pore diameter (3.452 nm), and mass loss at the first stage (3%, around 10% of CS), which indicated a successful synthesis, well-defined structure, and good thermostability. Adsorption tests of CS-MA-DETA microspheres were performed in Pb(II) and/or Cd(II) solution(s) at various pH values, contact time, and initial concentrations, exhibiting an excellent adsorption capability. Its maximum adsorption capacity calculated by Langmuir model was 239.2 mg Pb(II)/g, or 201.6 mg Cd(II)/g, which was higher than those of most available CS-based adsorbents. Furthermore, several adsorption kinetic and isotherm models were employed to investigate its uptake behavior, implying that it was mainly a monolayer adsorption and chemisorption process. Five-cycle reusability tests demonstrated CS-MA-DETA microspheres could be repeatedly used without significant capacity loss (<10%). Additionally, several potential bonding modes and adsorption sites for both metal ions were also proposed. Overall, CS-MA-DETA microspheres with outstanding adsorption performance toward Pb(II) and/or Cd(II) might serve as a new absorbent for wastewater purification.

RESUMEN

A novel chitosan derivative, 3,6-O-[N-(2-aminoethyl)-acetamide-yl]-chitosan (AACS), was successfully prepared to improve water solubility and antibacterial activity of chitosan. AACS had good antibacterial activity, with minimum inhibitory concentrations of 0.25mg/mL, against Escherichia coli and Staphylococcus aureus. Cell membrane integrity, electric conductivity and NPN uptake tests showed that AACS caused quickly increasing the release of intracellular nucleic acids, the uptake of NPN, and the electric conductivity by damaging membrane integrity. On the other hand, hydrophobicity, cell viability and SDS-PAGE experiments indicated that AACS was able to reduce the surface hydrophobicity, the cell viability and the intracellular proteins through increasing membrane permeability. SEM observation further confirmed that AACS could kill bacteria via disrupting their membranes. All results above verified that AACS mainly exerted antibacterial activity by a membrane damage mechanism, and it was expected to be a new food preservative.

Asunto(s)

Antibacterianos/farmacología , Membrana Celular/efectos de los fármacos , Membrana Celular/metabolismo , Quitosano/farmacología , Antibacterianos/química , Quitosano/análogos & derivados , Quitosano/química , Conductividad Eléctrica , Escherichia coli/citología , Escherichia coli/efectos de los fármacos , Interacciones Hidrofóbicas e Hidrofílicas , Pruebas de Sensibilidad Microbiana , Peso Molecular , Solubilidad , Staphylococcus aureus/citología , Staphylococcus aureus/efectos de los fármacos , Agua/química

RESUMEN

A new microbe, Serratia marcescens W5 was successfully isolated. Its feasibility in purification of excessively nitrogen-containing wastewater was evaluated using inorganic nitrogen media. Single factor tests showed that W5 exhibited high ammonium removal rates (above 80%) under different culture conditions (pH 7-10, C/N ratios of 6-20, 15-35°C, 0-2.5% of salinity, respectively). Besides various organic carbon sources, W5 was able to utilize calcium carbonate with 28.05% of ammonium removed. Further experiments indicated that W5 was capable of resisting high-strength ammonium (1200mg/L) with the maximum removal rate of 514.13mgL(-1)d(-1). The nitrogen removal pathway of W5 was also tested, showing that both nitrite and nitrate were efficiently removed only in the presence of ammonium, with hydroxylamine as intermediate, which was different from the conventional nitrogen removal pathway. All the results verified that W5 was a good candidate for the purification of excessively nitrogenous wastewater.

Asunto(s)

Procesos Heterotróficos , Nitrógeno/metabolismo , Serratia marcescens/metabolismo , Aerobiosis , Compuestos de Amonio/metabolismo , Desnitrificación , Nitratos/metabolismo , Nitritos/metabolismo , Nitrógeno/aislamiento & purificación , Aguas Residuales/química