RESUMEN

In recent years, smartphones have been integrated into rapid colorimetric sensors for heavy metal ions, but challenges persist in accuracy and efficiency. Our study introduces a novel approach to utilize biogenic gold nanoparticle (AuNP) sensors in conjunction with designing a lightbox with a color reference and machine learning for detection of Fe3+ ions in water. AuNPs were synthesized using the aqueous extract of Eleutherine bulbosa leaf as reductants and stabilizing agents. Physicochemical analyses revealed diverse AuNP shapes and sizes with an average size of 19.8 nm, with a crystalline structure confirmed via SAED and XRD techniques. AuNPs exhibited high sensitivity and selectivity in detection of Fe3+ ions through UV-vis spectroscopy and smartphones, relying on nanoparticle aggregation. To enhance image quality, we developed a lightbox and implemented a reference color value for standardization, significantly improving performance of machine learning algorithms. Our method achieved approximately 6.7% higher evaluation metrics (R 2 = 0.8780) compared to non-normalized approaches (R 2 = 0.8207). This work presented a promising tool for quantitative Fe3+ ion analysis in water.

RESUMEN

We present the in situ synthesis of silver nanoparticles (AgNPs) through ionotropic gelation utilizing the biodegradable saccharides lactose (Lac) and alginate (Alg). The lactose reduced silver ions to form AgNPs. The crystallite structure of the nanocomposite AgNPs@Lac/Alg, with a mean size of 4-6 nm, was confirmed by analytical techniques. The nanocomposite exhibited high catalytic performance in degrading the pollutants methyl orange and rhodamine B. The antibacterial activity of the nanocomposite is pH-dependent, related to the alterations in surface properties of the nanocomposite at different pH values. At pH 6, the nanocomposite demonstrated the highest antibacterial activity. These findings suggest that this nanocomposite has the potential to be tailored for specific applications in environmental and medicinal treatments, making it a highly promising material.

RESUMEN

The extraction of bioactive compounds, including essential oils and flavonoids, using organic solvents is a significant environmental concern. In this work, waste C. grandis peel was the ingredient used to extract essential oil and naringin by conducting a supercritical CO2 technique with a two stage process. In the first stage, the extraction with only supercritical CO2 solvent showed a significant enhancement of the d-limonene component, up to 95.66% compared with the hydro-distillation extraction (87.60%). The extraction of naringin using supercritical CO2 and ethanol as a co-solvent was done in the second stage of the process, followed by evaluating in vitro antimicrobial activity of both the essential oil and naringin. The essential oil indicated significant activity against M. catarrhalis (0.25 mg ml-1), S. pyogenes (1.0 mg ml-1), S. pneumoniae (1.0 mg ml-1). Whilst naringin gave good inhibition towards all tested microbial strains with MIC values in the range of 6.25-25.0 µM. In particular, naringin exhibited high antifungal activity against T. rubrum, T. mentagrophytes, and M. gypseum. The molecular docking study also confirmed that d-limonene inhibited bacterium M. catarrhalis well and that naringin possessed potential ligand interactions that proved the inhibition effective against fungi. Molecular dynamics simulations of naringin demonstrated the best docking model using Gromacs during simulation up to 100 ns to explore the stability of the complex naringin and crystal structure of enzyme 2VF5: PDB.

RESUMEN

Chemical investigation on chloroform extract of Phlogacanthus turgidus led to the isolation of one new compound namely turgidol, together with five known triterpenoids, lupeol, lupenone, betulin, betulinic acid, and taraxerol. Their structures and stereochemistry have been determined by 1 D and 2 D NMR analysis, high resolution mass spectrometry, and compared with those in literatures. The relative configuration of turgidol was defined using DFT-NMR chemical shift calculations and subsequent DP4+ probability method. Turgidol, betulin, and betulinic acid were evaluated for cytotoxic activity toward K562 cancer cell line and the alpha-glucosidase inhibition.

Asunto(s)

RESUMEN

A series of poly-3-alkylthiophenes (P3ATs) with butyl (P3BT), hexyl (P3HT), and octyl (P3OT) side-chains and well-defined molecular weights (MWs) were synthesized using Grignard metathesis polymerization. The MWs of P3HTs and P3OTs obtained via gel permeation chromatography agreed well with the calculated MWs ranging from approximately 10 to 70 kDa. Differential scanning calorimetry results showed that the crystalline melting temperature increased with increasing MWs and decreasing alkyl side-chain length, whereas the crystallinity of the P3ATs increased with the growth of MWs. An MW-dependent red shift was observed in the UV-Vis and photoluminiscence spectra of the P3ATs in solution, which might be a strong evidence for the extended effective conjugation occurring in polymers with longer chain lengths. The photoluminescence quantum yields of pristine films in all polymers were lower than those of the diluted solutions, whereas they were higher than those of the phenyl-C61-butyric acid methyl ester-blended films. The UV-Vis spectra of the films showed fine structures with pronounced red shifts, and the interchain interaction-induced features were weakly dependent on the MW but significantly dependent on the alkyl side-chain length. The photovoltaic device performances of the P3BT and P3HT samples significantly improved upon blending with a fullerene derivative and subsequent annealing, whereas those of P3OTs mostly degraded, particularly after annealing. The optimal power conversion efficiencies of P3BT, P3HT, and P3OT were 2.4%, 3.6%, and 1.5%, respectively, after annealing with MWs of ~11, ~39, and ~38 kDa, respectively.

RESUMEN

The diastereoselectivity of adducts in the addition reaction via the Felkin-Anh model is affected significantly by the steric effect of bulky groups. However, the influence of steric alkyl chain length has not been studied for the diastereoselectivity. In this work, we present a new strategy for the racemic synthesis of ß-methyl alcohols to obtain various diastereomer ratios using the Felkin-Anh model. The addition of alkyl Grignard reagents to α-methyl aldehydes afforded diastereomer ratios of threo/erythro ≈ 2:1, while the reduction in structurally related ketones using LiAlH4 afforded ratios of threo/erythro ≈ 1:1. The experimental data showed no effect of alkyl chain length on either side on the stereoselectivity of adducts. All synthesized analogues were evaluated for attractiveness to Rhynchophorus ferrugineus weevils in the field. Five novel derivatives, including two alcohols and three ketones, were found to attract weevils in the field trials. Among them, 3-methyldecan-4-one (5b) and 4-methyldecan-5-ol (11a) were found to be the most attractive to the insects.

Asunto(s)

RESUMEN

This work presents a simply new method for in situ synthesis of gold nanoparticles (AuNPs) using the biodegradable polysaccharides. A novel composite of lactose/alginate (Lac/Alg) could be prepared easily through ionotropic gelation mechanism which can reduce in situ gold ions into AuNPs. Lactose plays a crucial role as a reducing reagent which are demonstrated by FTIR analysis. The crystalline structure of AuNPs with a mean size of 10 nm has been confirmed by analysis techniques. The nanocomposite powder possesses highly catalytic performance for degradation of contaminants including 4-nitrophenol, methyl orange, rhodamine 6 G and rhodamine B. The dispersion solution of AuNPs@Lac/Alg was used as an effective probe for highly selective detection of Fe3+ ions. The detection mechanism replies on the aggregation of nanocomposite in the presence of Fe3+ ions. LOD value was found to be 0.8 µM in a linear range of 2.0-80.0 µM.

Asunto(s)

RESUMEN

This study presents an efficient and facile method for biosynthesis of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) using aqueous extract of burdock root (BR), A. lappa, and their applications. The nanoparticles were characterized by ultraviolet-visible spectrophotometry, X-ray diffraction, transmission electron microscopy, energy dispersive X-ray, thermogravimetry, and differential thermal analysis. AgNPs capped the BR extract (BR-AgNPs) possessed roughly spherical geometry with an average diameter of 21.3 nm while uneven geometry of AuNPs capped the BR extract (BR-AuNPs) showed multi shapes in average size of 24.7 nm. The BR-AgNPs strongly inhibited five tested microorganism strains. In particular, the nanoparticles showed excellent catalytic activity for the conversion of pollutants within wastewater. Pseudo-first-order rate constants for the degradation of 4-nitrophenol, methyl orange, and rhodamine B were respectively found 6.77 × 10-3, 3.70 × 10-3, and 6.07 × 10-3 s-1 for BR-AgNPs and 6.87 × 10-3, 6.07 × 10-3, and 7.07 × 10-3 s-1 for BR-AuNPs. Graphical abstract ᅟ.

Asunto(s)

RESUMEN

This study presents an efficient and facile method for the trapping of Ag+ ions on hybrid nanocomposite based on 2-hydroxypropyl-ß-cyclodextrin (HPCD) and alginate (Alg) in aqueous medium through ionotropic gelation mechanism and followed by in situ assembly of silver nanoparticles (AgNPs) using aqueous extract of Jasminum subtriplinerve leaves as a reducing agent. The nanocomposite AgNPs/HPCD/Alg was characterized by UV-vis, EDX, TEM, HR-TEM analysis. The AgNPs were found to be spherical shape and uniform size with an average diameter of 13.5 nm. EDX data showed about 4.0% (w/w) of AgNPs capped on the nanocomposite HPCD/Alg. The role of HPCD and Alg in the nanocomposites was observed from FTIR and thermal studies. The stability and distribution of the nanoparticles in the aqueous solution were determined by zeta potential and DLS measurements. The nanocomposites showed excellent catalytic performance for degradation of pollutants within industrial effluents including 4-nitrophenol, methyl orange and rhodamine B.