RESUMEN
The purpose of this study is to valorize biomass waste into products with added value for indoor applications. Thus, broadleaf sawdust was chemically processed by the solvolysis reaction in acid catalysis in the presence of diethylene glycol at 160 °C for 4 h. After filtration and removal of the unreacted biomass, the glycolysis product was used in 6 different polyurethane adhesive formulations for wood bonding. The adhesive films were characterized by FT-IR, TGA, and DMA, while the mechanical performances were investigated by tensile and three-point bending tests. An innovative method for the determination of the working time was proposed. After the displacement of the wood substrates by the tensile test, the bonded area was investigated by SEM analysis. To confirm a correlation between the mechanical performances of the adhesives and their structure/formulation, two-dimensional (2D) simulations were performed based on the tensile tests.
RESUMEN
The present work describes the synthesis of new versatile polyurea (PU) and polyurethane (PUR) matrices, including different chain extenders, which facilitate the design of distinct, tunable properties, and high-performance derivatives. These polymers can be used for various defense and security applications, such as coatings for ballistic protection, CBRN protection, binders for energetic formulations, etc. Combining aliphatic and aromatic molecules in PU or PUR structures enables the synthesis of polymers with improved and controllable thermo-mechanical properties. Thus, for polyurea synthesis, we utilized two types of polymeric aliphatic diamines and three types of aromatic chain extenders (1,1'-biphenyl-4,4'-diamine, benzene-1,2-diamine, and 1,2-diphenylhydrazine). An analogous method was used to synthesize polyurethane films by employing one polymeric aliphatic polyol and three types of aromatic chain extenders (benzene-1,3-diol, benzene-1,4-diol, and benzene-1,2,3-triol). Subsequently, various analytic techniques (Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), single cantilever dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), frequency-dependent shear modulus survey, tensile tests, water contact angle measurements, and scanning electron microscopy (SEM) with energy-dispersive X-ray analysis (EDX)) have been utilized to characterize the synthesized materials and to evaluate the influence of each chain extender on their final properties.
RESUMEN
The environmental impact and availability of ingredients are vital for the new generation of rocket propellants. In this context, several novel composite propellants were prepared based on the "greener" oxidizer phase-stabilized ammonium nitrate (PSAN), a micronized aluminum-magnesium alloy fuel, iron oxide powder burn rate modifier, triethylene glycol dinitrate (TEGDN) energetic plasticizer and a polyurethane (PU) binder. The novelty of this study is brought by the innovative procedure of synthesizing and combining the constituents of these heterogeneous compositions to obtain high-performance "eco-friendly" rocket propellants. The polymorphism shortcomings brought by ammonium nitrate in these energetic formulations have been solved by its co-crystallization with potassium salts (potassium nitrate, potassium chromate, potassium dichromate, potassium sulphate, potassium chlorate and potassium perchlorate). Polyester-polyol blends, resulting from recycled post-consumer polyethylene terephthalate (PET) glycolysis, were utilized for the synthesis of the polyurethane binder, especially designed for this type of application. To adjust the energetic output and tailor the mechanical properties of the propellant, the energetic plasticizer TEGDN was also involved. The performance and safety characteristics of the novel composites were evaluated through various analytical techniques (TGA, DTA, XRD) and specific tests (rate of combustion, heat of combustion, specific volume, chemical stability, sensitivity to thermal, impact and friction stimuli), according to NATO standards, providing promising preliminary results for further ballistics investigations.
RESUMEN
The issue of heavy metal and radionuclide contamination is still causing a great deal of concern worldwide for environmental protection and industrial sites remediation. Various techniques have been developed for surface decontamination aiming for high decontamination factors (DF) and minimal environmental impact, but strippable polymeric nanocomposite coatings are some of the best candidates in this area. In this study, novel strippable coatings for heavy metal and radionuclides decontamination were developed based on the film-forming ability of polyvinyl alcohol, with the remarkable metal retention capacity of bentonite nanoclay, together with the chelating ability of sodium alginate and with "new-generation" "green" complexing agents: iminodisuccinic acid (IDS) and 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC). These environmentally friendly water-based decontamination solutions are capable of generating strippable polymeric films with optimized mechanical and thermal properties while exhibiting high decontamination efficiency (DF ≈ 95-98% for heavy metals tested on glass surface and DF ≈ 91-97% for radionuclides 241Am, 90Sr-Y and 137Cs on metal, painted metal, plastic, and glass surfaces).
RESUMEN
Novel polyurethane-based binders, specifically designed for environmentally responsible rocket propellant composites, were obtained by employing the polyester-polyols that resulted from the degradation of polyethylene terephthalate waste. A new class of "greener" rocket propellants, comprising polyurethanes (based on recycled PET) as the binder, phase stabilized ammonium nitrate (PSAN) as the eco-friendly oxidizer, and triethylene glycol dinitrate (TEGDN) as the energetic plasticizer, together with aluminum as fuel and Fe2O3 as the catalyst, is herein reported. The components of the energetic mixtures were investigated (individually and as composite materials) through specific analytical tools: 1H-NMR, FT-IR, SEM-EDX, DTA and TGA, tensile and compression tests, DMA, and micro-CT. Moreover, the feasibility of this innovative solution is sustained by the ballistic performances exhibited by these composite materials in a subscale rocket motor, proving that these new formulations are suitable for rocket propellant applications.