RESUMEN

ObjectiveTo explore the therapeutic effect of Huangliansan on atopic dermatitis （AD） model mice induced by 2， 4-dinitrochlorobenzene （DNCB）. MethodA total of 42 male BALB/c mice were randomly divided into normal group， model group， hydrocortisone group， low， medium， and high-dose groups （0.3， 0.6， 1.2 g·kg-1） of Huangliansan oil， and water extract group （0.6 g·kg-1） of Huangliansan. In addition to the normal group， DNCB was applied on the back of mice in other groups to establish the AD model. On the 15th day after DNCB stimulation， each group was given the corresponding drug or solvent， and the changes in skin lesions， dermatitis score， and frequency of scratching were observed and recorded. Hematoxylin-eosin （HE） staining was used to observe the histopathological changes in the skin and spleen. Real-time fluorescent quantitative polymerase chain reaction （Real-time PCR） was used to detect mRNA levels of filaggrin （FLG）， lorophane （LOR）， and involucrin （IVL） in skin， as well as immunoglobulin E （lgE）， interleukin-4 （IL-4）， interleukin-6 （IL-6）， interleukin-1β （IL-1β）， tumor necrosis factor-α （TNF-α）， and interferon-γ （IFN-γ） in spleen. ResultCompared with the normal group， the model group showed symptoms of skin swelling and scab， and the score of dermatitis， the frequency of scratching， and the spleen index were increased （P<0.05）. The expression levels of FLG， LOR， and IVL in skin tissue were significantly decreased （P<0.01）， and the mRNA expressions of IgE， IL-4， IL-6， IL-1β， and TNF-α in the spleen were significantly increased， while the expression level of IFN-γ was significantly decreased （P<0.01）. Compared with the model group， the symptoms of skin erythema， scaly， and scab of mice in each drug group were alleviated to varying degrees， and the score of dermatitis， the frequency of scratching， and the spleen index were decreased （P<0.05， P<0.01）. In addition， the expression levels of FLG， LOR， and IVL in the skin of mice in the drug group were increased （P<0.05， P<0.01）， and the mRNA expression of IgE， IL-4， IL-6， IL-1β， and TNF-α in spleen were decreased. IFN-γ was increased （P<0.05， P<0.01）， and the lesions of the skin and spleen were improved to varying degrees. The medium-dose group of Huangliansan oil and hydrocortisone group had the most obvious manifestations （P<0.05， P<0.01）. The indexes in the medium-dose group of Huangliansan oil were better than those in the water extract group of Huangliansan. ConclusionHuangliansan may improve the expression level of skin barrier protein， inhibit the expression of helper T cell 2 （Th2）-related inflammatory factors， increase the expression of helper T cell 1 （Th1） inflammatory factors， restore the skin barrier function and Th1/Th2 balance in the spleen， regulate the inflammatory response in the spleen of AD mice， and thus relieve AD. Huangliansan oil is more effective than water extract.

RESUMEN

Objective To analyze the cases that are easily misdiagnosed as diffuse large B-cell lymphoma (DLBCL),and to explore the diagnosis,differential diagnosis and clinicopathological features of DLBCL.Methods The clinicopathological data of 431 cases preliminarily diagnosed as DLBCL in the Department of Pathology,School of Basic Medical Science,Peking University from October 2016 to December 2017 were retrospectively analyzed.Further immunohistochemical staining and molecular biological tests were performed if necessary.Results The diagnostic accuracy rate of DLBCL was 88.86％ (383/431).Misdiagnosis mainly occurred in follicular lymphoma (36 cases,8.35％),high-grade B-cell lymphoma (HGBL) with gene rearrangement of c-myc and bcl-2 or bcl-6 (4 cases,0.93％),atypical lymphoid tissue hyperplasia (3 cases,0.70％),mantle cell lymphoma (3 cases,0.70％),classic Hodgkin lymphoma (CHL) (1 case,0.23％) and composite lymphoma (DLBCL and CHL) (1 case,0.23％).Except the poor quality of sections,the lack of immunohistochemical markers,the poor knowledge of the diagnosis of DLBCL and high-grade FL as well as HGBL were the main reasons of misdiagnosis.Conclusions The diagnosis and differential diagnosis of DLBCL is based on morphology,and it needs to combine with the corresponding immunohistological markers and molecular biological detection when necessary.The recognition of clinical and pathological features of various types of misdiagnosed lymphomas should be strengthened.

RESUMEN

OBJECTIVE: The objective of this paper is to analyze the stress distribution in the deep wedge-shaped defective mandibular first premolars restored with different methods. METHODS: Three-dimensional finite element models of mandibular first premolar with deep wedge-shaped defect were created. The model, which was untreated after root canal treatment, served as the control group. Then, according to different treatment designs, four experimental groups were established as follows: resin filling (A), post restoration after resin filling (B), crown restoration after resin filling (C), and post and crown restoration after resin filling (D). Four different post materials were then chosen for establishing the subgroup models: fiber post (B1, D1), AuPd post (B2, D2), pure Ti post (B3, D3), and CoCr post (B4, D4). A force of 100 N was applied at a 30° angle on the buccal-inclined surface near the top of the buccal cusp. The maximum principal stress and Von Mises stress were investigated using finite element analysis software. RESULTS: 1) For the control group, the maximum principal stress and Von Mises stress of the residual dentine were the same as those of the tip of the defect. 2) Compared with the control group, the maximum principal stress and Von Mises stress of groups A, B, C, and D decreased greatly (P<0.05). The maximum principal stress and Von Mises stress of groups C and D with crowns were similar. The maximum principal stress and Von Mises stress of the post-dentine surface of groups B and D with fiber post were less than those in the cast metal post models (P<0.05). 3) The displacement of the buccal cusp of group A was similar to that of the control group (P>0.05) and larger than those in groups B, C, and D (P<0.05). CONCLUSIONS: It is necessary for deep wedge-shaped defective teeth to be treated with full crowns, but a post is not necessary. If a post is used, fiber post with elastic modulus closer to the dentine is more suitable than metal post.
.

Asunto(s)

RESUMEN

Objective To observe and compare the different forces between doctors and nurses used visible laryngoscope endotracheal intubation applied to the oropharyngeal organization. Methods 10 nurses (to carry on laryngoscope intubation theory, and had certain study period practice) were chosen in group A and 10 clinical anaesthetize doctors (to be possible correctly used visible laryngoscopes) were chosen in group B, two groups used the visible laryngoscope on the same model person body inserted the tube, computer monitor software recorded results. Results The impulse force was (25.57±3.37) N·s and insert tube time was (25.3±3.3) s in group A which were higher than (16.47±2.99) N·s and (16.2±3.0) s in group B (t=2.550 and 2.207, P0.05). Conclusions There is no statistics difference forces applied to the oropharyngeal organization between nurses and anaesthesiologists using visible laryngoscope intubation, and visible laryngoscope intubation technique is easy to learn and it is feasible by the nurse to master the technology and applied to anesthesia intubation care and emergency care.

RESUMEN

Objective To study the frequency of diffuse large B-cell lymphoma (DLBCL) with multi-genetic alteration, and its correlation with c-myc, bcl-2 and bcl-6 protein expression. Methods 50 cases diagnosed with DLBCL from January 2012 to December 2016 were collected. The expression of c-myc, bcl-2 and bcl-6 was analyzed by immunohistochemistry. Interphase fluorescence in situ hybridization (I-FISH) analysis was performed to identify the genetic alteration of c-myc, bcl-2 and bcl-6. Results In all cases, there were 27 males and 23 females with a median age of 50 years (range: 3-85 years). 23 (46.00 %) cases were defined as primary nodal DLBCL and 27 (54.00 %) cases were primary extra-nodal DLBCL, with gastrointestinal tract (48.15 %, 13/27) being the most common site of involvement. c-myc protein expression was detected in 94.00 % (47/50) cases, in which 82.00 % (41/47) cases exhibited high levels of c-myc expression with positive nuclear staining observed in over 40.00 % of tumor cells. The positive rate of bcl-2 protein was 84.00 % (42/50), 76 % (38/50) cases presented with high-level bcl-2 expression. Concurrent high expression of c-myc and bcl-2 were presented in 18 cases (36.00%). FISH analysis demonstrated c-myc gene rearrangement in 7 cases (14.00 %) and amplification in 2 cases (4.00 %). bcl-2 gene rearrangement was detected in 6 cases (12.00 %) and 4 cases (8.00 %) exhibited gene amplification. bcl-6 gene rearrangement was identified in 8 cases (16.00%), amplification in 3 cases (6.00%), and 1 case concomitantly harbored the rearrangement and amplification of bcl-6. Multi-genetic alterations were defined in 4 cases with 3 cases fulfilling the criteria for double-hit lymphoma (DHL) and 1 case for triple-hit lymphoma (THL). For the cases with concomitant high-level expression of c-myc and bcl-2 proteins, 3 cases (16.67 %) was detected with multi-genetic alterations, including 2 cases for DHL and 1 case for THL. Conclusions The proportion of DLBCL with multi-genetic alterations is 8.00 % in this study. The genetic alterations are not consistently correlated with the protein expression. The molecular genetic testing is reliable for the identification of DHL.

RESUMEN

OBJECTIVE: This study aimed to investigate the influence of coping material and porcelain firing on the marginal and internal fit of computer-aided design/computer-aided manufacturing (CAD/CAM) of zirconia ceramic implant- and titanium ceramic implant-supported crowns. METHODS: Zirconia ceramic implant (group A, n = 8) and titanium metal ceramic implant-supported crowns (group B, n = 8) were produced from copings using the CAD/CAM system. The marginal and internal gaps of the copings and crowns were measured by using a light-body silicone replica technique combined with micro-computed tomography scanning to obtain a three-dimensional image. Marginal gap (MG), horizontal marginal discrepancy (HMD), and axial wall (AW) were measured. Statistical analyses were performed using SPSS 17.0. RESULTS: Prior to porcelain firing, the measurements for MG, HMD, and AW of copings in group A were significantly larger than those in group B (P < 0.05). After porcelain firing, the measurements for MG of crowns in group A were smaller than those in group B (P < 0.05), whereas HMD and AW showed no significant difference between the two groups (P > 0.05). Porcelain firing significantly reduced MG (P < 0.05) in group A but significantly increased MG, HMD, and AW in group B (P < 0.05) HMD and AW were not influenced by porcelain firing in group A (P > 0.05). CONCLUSION: The marginal fits of CAD/CAM zirconia ceramic implant-supported crowns were superior to those of CAD/CAM titanium ceramic-supported crowns. The fits of both the CAD/CAM zirconia ceramic implant- and titanium ceramic implant-supported crowns were obviously influenced by porcelain firing.

Asunto(s)

RESUMEN

OBJECTIVE: This study investigated the influence of different designs and porcelain/glaze firing on the marginal and internal fit of three kinds of computer aided design/computer aided manufacturing (CAD/CAM) zirconia ceramic implant-supported crowns. METHODS: Three groups of zirconia ceramic implant-supported crowns with different designs were produced from copings by using a Cercon CAD/CAM system (n = 8). The first two groups comprised double-layer crowns (zirconia coping + veneer) with regular (Group A) and full circumferential zirconia-collar marginal designs (Group B). The third group was composed of anatomic single-layer zirconia crowns without cores (Group C). Initially, the marginal and internal gaps of the copings and crowns were individually replicated by light-body silicon and then measured by micro-computed tomography scanning before and after porcelain/glaze firing. Five measurements were employed: vertical marginal gap (MG); horizontal marginal discrepancy (HMD); chamfer area (CA); axial wall (AW); and axial-occlusal transition area (AOT). Statistical analyses were performed by SPSS 17.0. RESULTS: HMD measurements in Group A were statistically higher than those in Groups B and C (P < 0.05), regardless of whether the values were obtained before or after porcelain/glaze firing. By contrast, the HIMD measurements in Groups B and C showed no significant difference (P > 0.05). Moreover, no differences were noted in MG, CA, AW, and AOT among the three groups (P > 0.05). All the measurements in the three groups showed no significant change after porcelain/glaze firing (P > 0.05), except for MG in Group A, which significantly decreased (P < 0.05). CONCLUSION: The marginal fits of the double-layer crowns with full circumferential zirconia-collar and the anatomic single-layer zirconia crowns were superior to that of the double-layer crowns with regular margins. The MG of the crowns with regular margins was obviously influenced by porcelain firing.

Asunto(s)

RESUMEN

OBJECTIVE: This study was performed to investigate the electromyographic (EMG) activity of the masseter muscle and the anterior temporalis muscle, as well as the masticatory efficiency after insertion of the dentures in edentulous individuals whose maxillomandibular horizontal relationship records were obtained with three different methods. METHODS: Ten edentulous individuals were enrolled in this study. Three types of complete dentures for these 10 edentulous patients were made according to their different maxillomandibular horizontal relationship records. The maxillomandibular horizontal relationship of complete dentures was recorded by three methods. In the first method (A), the maxillomandibular horizontal relationship was determined at the gothic arch tracing apex. In the second method (B), the relationship was 1 mm anterior to the tracing apex with the gothic arch. In the last method (C), the horizontal jaw relation was recorded by natural chewing. The muscular activities of the three complete dentures were examined by EMG. The masticatory efficiency was evaluated based on the absorbance. The differences among the dentures were statistically analyzed with SPSS 17.0. RESULTS: The muscular activities of dentures B and C were much higher than that of denture A during clenching in the center occlusion and during chewing (P<0.05). The highest asymmetry index was found indenture C, which was significantly higher than those of dentures A and B (P<0.05). A statistically significant increase in the absorbance was observed between dentures B and C (P<0.05); otherwise, no statistically significant differences were observed (P>0.05) between B and C. CONCLUSIONS: Given the limitations of this experimental design, in edentulous individuals the maxillomandibular horizontal relationship recorded at 1 mm anterior to the tracing apex with the gothic arch can improve the function of masticatory muscles and strengthen masticatory performance.

Asunto(s)

RESUMEN

Objective:To investigate pathological characteristics and prognosis of patients with Epstein-Barr virus (EBV) positive gastric diffuse large B-cell lymphoma (DLBCL). Methods:Through retrospective study, we collected 75 cases of patients with DLBCL that oc-curs in the stomach. The patients were divided into two groups consisting of 60 cases of EBV negative control group and 15 cases of EBV positive group. To analyze the pathological characteristics and prognosis of patients with EBV positive gastric DLBCL, immunohisto-chemical and Epstein-Barr encoding region (EBER) in situ hybridization methods were used to detect Bcl-2, c-myc protein expression, and EBV-encoded RNA (EBER). Results:In certain aspects of clinical manifestations, such as age, gender, and origin, the comparison be-tween EBV-positive and EBV-negative groups had no statistically significant difference. The same results were obtained for Bcl-2 and c-myc protein expression. However, a statistically significant difference (P=0.01) was observed under the R-CHOP regimen where the me-dian overall survival (OS) of the EBV-positive and EBV-negative groups were 15.1 and 31.4 months, respectively. Conclusion:In pa-tients with DLBCL of the stomach, the EBV infection had no obvious effects in terms of clinical manifestation, origin, morphology, and protein expression of tumor cells. EBV-positive DLBCL was not limited to elderly patients. Under the R-CHOP regimen, the prognosis of EBV-positive patients was worse than that of EBV-negative patients.

RESUMEN

Objective To investigate the clinicopathological and prognosis features of enteropathy-associated T-cell lymphoma (EATL).Methods 21 cases of EATL,6 cases of peripheral T-cell lymphoma (PTCL) and 11 cases of natural-killer/T-cell lymphoma (NKTCL) were collected from January 2008 to May 2015.The immunophenotype of the tumor cell was tested by EnVision and as well as EBV-EBER for EB virus.Some patients were performed with follow-up data.Results 21 EATL patients included 14 males,7 females and the middle age was 55 years old (40-79 years old).15 patients affected the small bowel,4 cases affected colon,2 cases affected more than one site.18 cases were mono-morpholohic EATL while 3 cases were classical EATL.The expression rates of neoplastic cells for CD3ε,CD4,CD8,CD56,Granzyme B,TIA-1 were 95.24 ％ (20/21),20.00 ％ (3/15),73.68 ％ (14/19),85.71％ (18/21),64.71％ (11/17),88.89 ％ (16/18) respectively.The expression of EBER in EATL patients (0,0/21) was obviously lower than that in NKTCL patients (100 ％,11/11).17 EATL patients had follow-up data,and the middle survival time was 15 months.No different prognosis was found in the three kinds of T-NHL (P =0.697).Conclusions EATL usually occurs in elder male and jejunum.The diagnosis of EATL needs a lot of information,including clinical history,endoscopy,histomorphology,immunophenotype and EBV-EBER result.EATL has low mobidity and high malignancy,it still lacks impactful therapeutic regimen.

RESUMEN

<p><b>OBJECTIVE</b>This study investigated the influence of different designs and porcelain/glaze firing on the marginal and internal fit of three kinds of computer aided design/computer aided manufacturing (CAD/CAM) zirconia ceramic implant-supported crowns.</p><p><b>METHODS</b>Three groups of zirconia ceramic implant-supported crowns with different designs were produced from copings by using a Cercon CAD/CAM system (n = 8). The first two groups comprised double-layer crowns (zirconia coping + veneer) with regular (Group A) and full circumferential zirconia-collar marginal designs (Group B). The third group was composed of anatomic single-layer zirconia crowns without cores (Group C). Initially, the marginal and internal gaps of the copings and crowns were individually replicated by light-body silicon and then measured by micro-computed tomography scanning before and after porcelain/glaze firing. Five measurements were employed: vertical marginal gap (MG); horizontal marginal discrepancy (HMD); chamfer area (CA); axial wall (AW); and axial-occlusal transition area (AOT). Statistical analyses were performed by SPSS 17.0.</p><p><b>RESULTS</b>HMD measurements in Group A were statistically higher than those in Groups B and C (P < 0.05), regardless of whether the values were obtained before or after porcelain/glaze firing. By contrast, the HIMD measurements in Groups B and C showed no significant difference (P > 0.05). Moreover, no differences were noted in MG, CA, AW, and AOT among the three groups (P > 0.05). All the measurements in the three groups showed no significant change after porcelain/glaze firing (P > 0.05), except for MG in Group A, which significantly decreased (P < 0.05).</p><p><b>CONCLUSION</b>The marginal fits of the double-layer crowns with full circumferential zirconia-collar and the anatomic single-layer zirconia crowns were superior to that of the double-layer crowns with regular margins. The MG of the crowns with regular margins was obviously influenced by porcelain firing.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>This study was performed to investigate the electromyographic (EMG) activity of the masseter muscle and the anterior temporalis muscle, as well as the masticatory efficiency after insertion of the dentures in edentulous individuals whose maxillomandibular horizontal relationship records were obtained with three different methods.</p><p><b>METHODS</b>Ten edentulous individuals were enrolled in this study. Three types of complete dentures for these 10 edentulous patients were made according to their different maxillomandibular horizontal relationship records. The maxillomandibular horizontal relationship of complete dentures was recorded by three methods. In the first method (A), the maxillomandibular horizontal relationship was determined at the gothic arch tracing apex. In the second method (B), the relationship was 1 mm anterior to the tracing apex with the gothic arch. In the last method (C), the horizontal jaw relation was recorded by natural chewing. The muscular activities of the three complete dentures were examined by EMG. The masticatory efficiency was evaluated based on the absorbance. The differences among the dentures were statistically analyzed with SPSS 17.0.</p><p><b>RESULTS</b>The muscular activities of dentures B and C were much higher than that of denture A during clenching in the center occlusion and during chewing (P<0.05). The highest asymmetry index was found indenture C, which was significantly higher than those of dentures A and B (P<0.05). A statistically significant increase in the absorbance was observed between dentures B and C (P<0.05); otherwise, no statistically significant differences were observed (P>0.05) between B and C.</p><p><b>CONCLUSIONS</b>Given the limitations of this experimental design, in edentulous individuals the maxillomandibular horizontal relationship recorded at 1 mm anterior to the tracing apex with the gothic arch can improve the function of masticatory muscles and strengthen masticatory performance.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>This study aimed to investigate the influence of coping material and porcelain firing on the marginal and internal fit of computer-aided design/computer-aided manufacturing (CAD/CAM) of zirconia ceramic implant- and titanium ceramic implant-supported crowns.</p><p><b>METHODS</b>Zirconia ceramic implant (group A, n = 8) and titanium metal ceramic implant-supported crowns (group B, n = 8) were produced from copings using the CAD/CAM system. The marginal and internal gaps of the copings and crowns were measured by using a light-body silicone replica technique combined with micro-computed tomography scanning to obtain a three-dimensional image. Marginal gap (MG), horizontal marginal discrepancy (HMD), and axial wall (AW) were measured. Statistical analyses were performed using SPSS 17.0.</p><p><b>RESULTS</b>Prior to porcelain firing, the measurements for MG, HMD, and AW of copings in group A were significantly larger than those in group B (P < 0.05). After porcelain firing, the measurements for MG of crowns in group A were smaller than those in group B (P < 0.05), whereas HMD and AW showed no significant difference between the two groups (P > 0.05). Porcelain firing significantly reduced MG (P < 0.05) in group A but significantly increased MG, HMD, and AW in group B (P < 0.05) HMD and AW were not influenced by porcelain firing in group A (P > 0.05).</p><p><b>CONCLUSION</b>The marginal fits of CAD/CAM zirconia ceramic implant-supported crowns were superior to those of CAD/CAM titanium ceramic-supported crowns. The fits of both the CAD/CAM zirconia ceramic implant- and titanium ceramic implant-supported crowns were obviously influenced by porcelain firing.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>To evaluate the correlation between MicroRNA-191 (miR-191) and T lymphoblastic leukemia/lymphoma (T-ALL/LBL) to probe its underlying molecular mechanism.</p><p><b>METHODS</b>The expression of miR-191 was examined by real-time PCR (RT-PCR) in 20 T-ALL/LBL tissue samples and 20 lymphoid reactive hyperplasia (LRH) tissue samples. The correlation between miR-191 and the clinicopathological feature of T-ALL/LBL was analyzed. Antisense miR-191 lentiviral vectors was constructed and transfected into T-ALL/LBL Jukat cells. After transfection, the expression of miR-191 was examined by RT-PCR. The cell activity was evaluated by CCK-8 asssy. The cell cycle and apoptosis were determined by flow cytometry.</p><p><b>RESULTS</b>Compared with LRH samples, the results of RT-PCR showed significant upregulation of miR-191 in 20 T-ALL/LBL tissue samples (1.875±0.079 vs 1.000, P<0.05). The expression level of miR-191 was negatively associated with prognosis. Compared with LV-NC-GFP and control groups, the expression of miR-191 significantly decreased after transfection of antisense miR-191 lentiviral vectors (0.578±0.012 vs 1.011±0.053 and 1.000, P<0.05), the percentages of apoptotic cells and the cell in G0/G1 phase significantly increased (P<0.05).</p><p><b>CONCLUSIONS</b>miR-191 might play a significant role in the development of T-ALL/LBL, implicating a new target for therapy.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>To evaluate the influence of eugenol-containing and resin-containing endodontic sealers on the bond strength of fiber posts using different strategies of root canal irrigation.</p><p><b>METHODS</b>Forty-eight mandibular premolars were endodontically treated. The specimens were randomly assigned into two groups according to different endodontic sealers. Group A used Endofil (eugenol-containing endodontic sealer), and group B used AH-plus (resin-containing endodontic sealer). After post space preparation, each group was randomly assigned into three subgroups according to the strategies of root canal irrigation (eight premolars in each subgroup). Group Al and B1: 0.9%NaCl irrigation; Group A2 and B2: 17% ethylene diamine tetraacetic acid (EDTA)+5.25%NaClO+0.9%NaCl irrigation; Group A3 and B3: ultrasonic agitation associated with 1 7%EDTA+5.25%NaClO+0.9%NaCl. One week after the cementation of fiber posts using RelyX™ Unicem, a push-out test was performed to measure the bond strength of the posts. The microstructure of the root canal surface was examined under scanning electron microscope (SEM).</p><p><b>RESULTS</b>The bond strengths of the six groups were as follows: Al (7.96±2.23) MPa, A2 (9.95±2.89) MPa, A3 (18.88±3.69) MPa, B1 (11.41±3.71) MPa, B2 (14.00±4.04) MPa, and B3 (19.14±3.27) MPa. Statistical analysis revealed a significant interaction between the different endodontic sealers and the strategies of root canal irrigation (P<0.05). Lower bond strength was found in group Al but not in group BI (P<0.05), and the same result was revealed when comparing group A2 and B2. No significant difference was observed between group A3 and B3 (P>0.05). SEM showed that the root canal in group A3 and B3 achieved the cleanest surface with nearly all dentine tubules opened.</p><p><b>CONCLUSION</b>The eugenol-containing endodontic sealer can impair the bond strength of fiber posts compared with the resin-containing sealer when the root canal is irrigated by 0.9% NaCl or 17%EDTA+5.25%NaClO+0.9%NaC. No difference was observed between the two sealers when using 17%EDTA+5.25% NaCIO+0.9%NaCl combined with ultrasonic irrigation.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>To evaluate the effect of different auxiliary resistance forms on the resistance and marginal fitness of complete crowns for short molar preparations.</p><p><b>METHODS</b>A total of 70 Nissin resin teeth were prepared with 20° total occlusal convergence, 2.5 mm of occlusocervical height, and a shallow finish line on a milling machine. The milled preparations were then randomly assigned to 7 groups of 10. The first group was used as the control group. A total of 30 dies were modified by preparing interproximal grooves with angles of 0°, 6°, and 20° centered on the mesial and distal surfaces of the dies. The rest of the teeth were prepared with occlusal holes in the center of the occlusal surface milled with the same burs to form 0°, 6°, and 20° holes. Cobalt-chromium copings were fabricated for all specimens. The marginal gap of specific points on the axial surface was measured before and after cementation. The resistance of each specimen was evaluated by applying an external force at an angle of 45° to the long axis of the die by using a universal testing machine in a lingual to buccal direction. The maximum force applied before crown dislodgement was measured. Data were analyzed using the SAS 9.2 software.</p><p><b>RESULTS</b>The results showed that the 0° groove, 0° hole, and 6° hole were effective in improving the resistance of the complete crowns (P<0.05). The 0° groove, 6° groove, 0° hole, 6° hole, and 20° hole had significant difference with the control group in terms of marginal discrepancies (P<0.05).</p><p><b>CONCLUSION</b>Auxiliary resistance forms with less degree indicate greater resistance force but worse marginal fitness. In clinical practice, if the resistance of a preparation is enough, the auxiliary resistance forms should be avoided from being used.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>To investigate the expression level of COX-2, p16(INK4A) and p53 in patients with classic Hodgkin's lymphoma (cHL), and to evaluate their correlation with prognosis.</p><p><b>METHODS</b>The clinical data and samples of 52 cHL cases were collected. Immunohistochemical staining was performed to analyze the proteins level mentioned above and in situ hybridization of EBV encoded RNA (EBER) to clarify the tumor EBV infection state. Correlation between the protein expression and prognosis of patients was analyzed.</p><p><b>RESULTS</b>Of 52 cases, the male and female ratio was 1.6∶1, the age was from 22 to 68 years old. All lesions located primarily in lymph nodes. All samples from 52 cases were stained with COX-2, p16(INK4A) and p53, and the positive expression of COX-2 was found in 28 cases (53.8%）, that of p16(INK4A) in 25 cases (48.1%)and p53 in 42 cases (80.8%）. All patients were divided into two groups according to differences in age (<40 years/ ≥ 40 years), gender (male/female), EBV infection (yes/no), B symptoms (yes/no), and the Ann Arbor staging (Ⅰ-Ⅱ/Ⅲ-Ⅳ), the correlation with COX-2, p16(INK4A) and p53 expression were analyzed, and only p53 expression was correlated with Ann Arbor staging (P=0.027). The statistical analysis of correlations between COX- 2, p16(INK4A) and p53 showed that the expression of COX-2 was strongly correlated with p53 (P=0.008), and p16 (INK4A) was not related to either COX-2 or p53 (P=0.246 and 0.958). Kaplan- Meier univariate OS analysis using SPSS17.0 software showed that only COX-2 expression was an adverse prognostic factor for patients'event free survival (EFS) (P=0.003). Meanwhile COX-2 expression was a unique independent prognostic factor analyzed by COX proportional hazards regression model (HR=0.091, 95% CI 0.017-0.505, P=0.006).</p><p><b>CONCLUSION</b>The expression rate of COX-2, p16 (INK4A) and p53 in the cHL were relatively high; and they were not statistically correlated with tumor EBV infection status; the COX-2 positive group had poor prognosis, but only event free survival time becomes statistically significant shorter. COX proportional hazard regression model was used to analyze the COX-2 expression as a independent adverse prognostic factors for EFS.</p>

Asunto(s)

RESUMEN

<p><b>OBJECTIVE</b>To summarize the clinicopathological features of testicular lymphomas (TL).</p><p><b>METHODS</b>The medical records of 65 patients diagnosed with TL between 2008.1.1 and 2014.11.30 were retrospectively reviewed.</p><p><b>RESULTS</b>TL was classified as primary (PTL) when there's no prior diagnosis of an extara-testicular lymphoma/leukemia and no concurrent widespread disease, except for the concomitant involvement of ipsilateral inguinal lymph nodes; otherwise it was classified as secondary (STL). Of our patients group, 46 (70.8%) cases were classified primary TL as and the other 19 (29.2%） cases were secondary TL. All patients presented with painless testicular swelling. The median age of STL was significantly younger than that of PTL [65 (12-88) ys vs 13 (1-75) ys, P<0.001]. Additionally, a striking difference in the distribution of histological subtypes was observed between the PTL and STL patients group.</p><p><b>CONCLUSION</b>Primary TLs were more common than secondary. Striking differences in the distribution of patients'age and histology were found between STL and PTL.</p>

Asunto(s)

RESUMEN

Objective To analyze the clinical pathological characteristics and prognosis of elderly patients with EB virus-positive diffuse large B-cell lymphoma (EBV+ DLBCL).Methods 24 elderly patients with EBV + DLBCL were collected to evaluate their clinical pathological characteristics and prognosis by comparison with the EBV-DLBCL,NOS during the same period.Results 24 EBV + DLBCL cases demonstrated two morphologic subtypes:polymorphic and monomorphic.And polymorphic subtype showed geographic necrosis more frequently than that in monomorphic subtype.According to Hans and Choi models,the majority of EBV+ DLBCL of the elderly were classified as non-GCB subtype (91.3 ％ and 100.0 ％,respectively).55.0 ％ cases showed CD30 positive,which was significantly higher than that in EBV-DLBCL group (P ＜ 0.001).Under the treatment of R-CHOP regimen,the overall survival (OS) of the elderly EBV+ DLBCL patients showed no significant difference with the ＞50-year old EBV-DLBCL patients (the median OS were 44.2 months and 29.2 months,P =0.587).Conclusions The elderly EBV + DLBCL patients are normally presented with polymorphic and monomorphic patterns.And geographic necrosis are often seen in polymorphic cases.CD30 expression and non-GCB subtypes are high.With the R-CHOP regimen,the OS of the elderly EBV+ DLBCL patients is similar with that of ＞50-year old EBV-DLBCL patients.

RESUMEN

Objective To explore the diagnostic value of ultrasonography for angular pregnancy and interstitial preg-nancy. Methods Characteristics of ultrasonogram of 110 patients with angular pregnancy and interstitial pregnancy who were confirmed by surgical pathology and clinical conservative treatment was analyzed and compared via transvaginal and transabdominal ultrasonography; color Dopplor and spectral Dopplor were applied to observe the blood supply of gestational sac or mass. Results There were 71 patients with angular pregnancy, and the accordance rate of ultra-sonography was 79.2%, in which 14 patients were collectively referred to as abnormal pregnancy. There were 39 pa-tients with interstitial pregnancy,and the accordance rate of ultrasonography was 50%, in which 20 patients were col-lectively referred to as ectopic pregnancy. Conclusion Transvaginal and transabdominal ultrasonography has a high di-agnostic value for angular pregnancy and interstitial pregnancy, and has a significant guidance for the selection of a clinical therapeutic regimen,whereas has no significant value for ruptured ectopic pregnancy.