RESUMEN

In the pharmaceutical industry, the unexpected appearance of crystalline forms could impact the therapeutic efficacy of an Active Pharmaceutical Ingredient (API). For quality control, a thorough qualitative and quantitative monitoring of pharmaceutical solid forms is essential to ensure the detection and the quantification of crystalline forms, wither different or with the same chemical composition (polymorphs) at a low detection level. The purpose of this paper was to review and highlight the importance of choosing adequate solid-state techniques for detection and quantification APIs that present polymorphism - based on limits of detection (LOD) and quantification (LOQ), pharmacopeias specifications, international guidelines and studies reported in the literature. To this study, the powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Infrared and Raman spectroscopies and solid-state nuclear magnetic resonance (NMR) were the solid-state techniques analyzed. Additionally, the Argentine, Brazilian, British, European, International, Japanese, Mexican and the United States of America pharmacopeias were reviewed. Based on the analysis performed, the advantages and disadvantages of these techniques, as well as the LOD and LOQ values of APIs were reported. In comparison to these solid-state techniques, reference material used for identification analyses should be previously identified with the corresponding polymorph. Without this previous procedure, the patterns, the spectra, and DSC curves of the reference material can only be used to confirm the mixture of solid forms, not being able to specify which polymorphs are contained in the sample. A major advantage of PXRD is the use of the calculated diffraction patterns obtained from the Crystallographic Information Frameworks (CIFs) files which could be used as a reference pattern without any other information, assistance technique, or physical standards. Regarding the quantification aspect, different pharmacopeias suggest various methods such as the PXRD combining with Rietveld method, which can be used to obtain lower LOD values for minority phases in the mixture of different substances without the need for a calibration curve. Raman spectroscopy can detect polymorphs in small particles and solid-state NMR spectroscopy is a powerful technique for quantification not only crystalline but also crystalline-amorphous mixtures. Finally, this review intends to be a useful tool to control, with efficiency and accuracy, the polymorphism of APIs in pharmaceutical compounds.

Asunto(s)

Industria Farmacéutica , Límite de Detección , Difracción de Rayos X , Preparaciones Farmacéuticas , Brasil , Rastreo Diferencial de Calorimetría

RESUMEN

PURPOSE: To understand the anomalous behavior of Saquinavir Mesylate (SQVM) in sodium decyl sulfate (SDS) medium during a dissolution test through a crystallographic analysis of the crystal obtained. As a result, it will be possible to elucidate its crystal structure and carry out a complete solid-state characterization of the API. METHODS: The solid form obtained was characterized by a structural analysis through X-ray single crystal and powder diffraction. The crystallographic structures of the new salt and the SQVM were compared. In addition, a complete solid-state characterization of SQVM raw material was carried out by techniques such as diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), Raman spectroscopy, scanning electron microscopy and a dissolution method. RESULTS: A new salt consisting of SQVM and SDS was crystallized and its crystal structure was elucidated and reported herein for the first time. The anionic part of SDS interacts with the cationic segment of SQVM to obtain a new salt designated as SQV-DS, which precipitates. The main difference between the two structures occurs in the c-axis expansion, which increases from 15.966 (5) to 21.1924 (14), respectively. CONCLUSIONS: Some of the strategies to enhance the dissolution rate of poorly aqueous soluble APIs include the use of surfactants such as SDS in the dissolution medium, as well as in the formulated products. However, there have been constant reports of a dissolution rate slowdown by some surfactants. The interaction mechanisms between the APIs and the dissolution medium containing surfactants need to be carefully investigated in current pharmaceutical formulations. Graphical Abstract.

Asunto(s)

Saquinavir , Sodio , Rastreo Diferencial de Calorimetría , Preparaciones Farmacéuticas , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Sulfatos , Difracción de Rayos X

RESUMEN

Lovastatin (LOV) is a drug used to treat hypercholesterolemia. Recent studies have identified its antioxidant effects and potential use in the treatment of some types of cancer. However, the low bioavailability related to its poor water solubility limits its use in solid oral dosage forms. Therefore, to improve the solubility of LOV three eutectic systems of LOV with the carboxylic acids benzoic (BEN), salicylic (SAL) and cinnamic (CIN) were obtained. Both binary phase and Tammann diagrams were constructed using differential scanning calorimetry (DSC) data of mixtures prepared from 0.1 to 1.0 molar ratios. Binary mixtures and eutectics were prepared by liquid-assisted grinding. The eutectics were further characterized by DSC and powder X-ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The LOV-BEN, LOV-SAL and LOV-CIN system formed a eutectic at an LOV mole fraction of 0.19, 0.60 and 0.14, respectively. The systems exhibited improvements in LOV solubility, becoming more soluble by five-fold in the LOV-SAL system and approximately four-fold in the other two systems. Considering that the solubility enhancements and the carboxylic acids used are generally recognized as safe by the U.S. Food and Drug Administration (FDA), the LOV eutectic systems are promising materials to be used in a solubility enhancement strategy for pharmaceutical product formulation.

RESUMEN

Irbesartan (IBS) is a tetrazole derivative and antihypertensive drug that has two interconvertible structures, 1H- and 2H-tautomers. The difference between them lies in the protonation of the tetrazole ring. In the solid-state, both tautomers can be isolated as crystal forms A (1H-tautomer) and B (2H-tautomer). Studies have reported that IBS is a polymorphic system and its forms A and B are related monotropically. These reports indicate form B as the most stable and less soluble form. Therefore, the goal of this contribution is to demonstrate through a complete solid-state characterization, thermodynamic study and dissolution properties that the IBS forms are desmotropes that are not related monotropically. However, the intention is also to call attention to the importance of conducting strict chemical and in solid-state quality controls on the IBS raw materials. Hence, powder X-ray diffraction (PXRD) and Raman spectroscopy (RS) at ambient and non-ambient conditions, differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FT-IR) and scanning electron microscopy (SEM) techniques were applied. Furthermore, intrinsic dissolution rate (IDR) and structural stability studies at 98% relative humidity (RH), 25 °C and 40 °C were conducted as well. The results show that in fact, form A is approximately four-fold more soluble than form B. In addition, both IBS forms are stable at ambient conditions. Nevertheless, structural and/or chemical instability was observed in form B at 40 °C and 98% RH. IBS has been confirmed as a desmotropic system rather than a polymorphic one. Consequently, forms A and B are not related monotropically.

RESUMEN

Polymorphism and particle size distribution can impact the dissolution behaviour and, as a consequence, bioavailability and bioequivalence of poorly soluble drugs, such as Efavirenz (EFV). Nevertheless, these characteristics do not explain some failures occurring in in vitro assays and in in vivo studies. EFV belongs to Class II and the High Activity Antiretroviral Therapy (HAART) is considered the best choice in the treatment of adults and children. EFV is a drug that needs bioequivalence studies for generic compounds. In this work, six raw materials were analyzed and two of them were utilized with human volunteers (in vivo assays or bioequivalence). All the routine pharmaceutical controls of raw materials were approved; however, the reasons for the failure of the bioequivalence assay could not be explained with current knowledge. The aim of this work was to study microstructure, a solid-state property of current interest in the pharmaceutical area, in order to find an explanation for the dissolution and bioequivalence behaviour. The microstructure of EFV raw materials was studied by Whole Powder Pattern Modelling (WPPM) of X-ray powder diffraction data. Results for different EFV batches showed the biorelevance of the crystalline domain size, and a clear correlation with in vitro (dissolution tests) and in vivo assays (bioequivalence).

Asunto(s)

Fármacos Anti-VIH/química , Benzoxazinas/química , Modelos Biológicos , Inhibidores de la Transcriptasa Inversa/química , Alquinos , Fármacos Anti-VIH/farmacocinética , Fármacos Anti-VIH/uso terapéutico , Benzoxazinas/farmacocinética , Benzoxazinas/uso terapéutico , Disponibilidad Biológica , Rastreo Diferencial de Calorimetría , Ciclopropanos , Contaminación de Medicamentos , Liberación de Fármacos , Humanos , Cinética , Microscopía Electrónica de Rastreo , Estructura Molecular , Tamaño de la Partícula , Difracción de Polvo , Polvos , Reproducibilidad de los Resultados , Inhibidores de la Transcriptasa Inversa/farmacocinética , Inhibidores de la Transcriptasa Inversa/uso terapéutico , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Sincrotrones , Equivalencia Terapéutica

RESUMEN

Progesterone is a natural hormone steroid used in humans for several treatments and in livestock for artificial insemination, which exhibits two polymorphic forms at ambient conditions: form 1 and form 2. Form 2 is metastable and more soluble than form 1; however, it is not suitable to use as powder raw material because it transforms into form 1 by the effects of grinding. A polymorphic screening of progesterone based on polymer-induced heteronucleation method was performed as an alternative to prepare the metastable form. Polyvinyl alcohol, hydroxypropyl methylcellulose (HPMC), dextran, gelatin, polyisoprene (PI) and acrylonitrile-butadiene (NBR) copolymer were used. Crystals were prepared from 0.5, 10 and 40 mg/mL solutions in acetone at room temperature by solvent evaporation. The samples were characterized by X-ray powder diffraction, differential scanning calorimetry (DSC), scanning electron microcopy and attenuated total reflectance infrared Fourier transform spectroscopy. Form 1 was nucleated from 40 mg/mL solutions on the six polymers and from 10 mg/mL solutions on PI and NBR. The mixture of form 1 and form 2 was obtained from 10 mg/mL solution on HPMC, dextran and gelatin and from 0.5 mg/mL solution crystallizations. Therefore, the polymeric devices, which crystallized the metastable and more soluble polymorph (2) of progesterone, would be a promissory alternative for the pharmaceutical applications.

Asunto(s)

Polímeros/química , Progesterona/química , Progestinas/química , Rastreo Diferencial de Calorimetría , Química Farmacéutica/métodos , Cristalización , Estabilidad de Medicamentos , Microscopía Electrónica de Rastreo , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos X

RESUMEN

Progesterone is a natural steroid hormone and a poor soluble drug which presents two polymorphs (forms 1 and 2). Different methods to obtain form 2 were tested and a complete solid-state characterization of both polymorphs (forms 1 and 2) was conducted. X-ray powder diffraction, hot stage microscopy, Fourier transform infrared, dispersive Raman, (13)C solid-state nuclear magnetic resonance spectroscopy, thermal analysis, scanning electron microscopy techniques and intrinsic dissolution rates (IDR) were applied to investigate physical-chemical and dissolution properties of these two polymorphs. Form 2 was obtained from diluted solutions and from melting after cooling at room temperature. Form 1 was obtained from concentrated solutions and, a mixture of both polymorphs was crystallized from intermediate solutions. The crystal habit was not a distinctive characteristic of each polymorph. The effect of mechanical stress was evaluated in the metastable polymorph (form 2). We observed that grinding form 2 produced seeds of form 1 that induced the transformation of form 2 into form 1 at high temperature. The polymorphic quantification from XRD patterns of ground samples were carried out by the Rietveld method. After grinding and at room temperature conditions (∼25 °C), it was observed the transformation of 17% of form 2 into form 1 in 10 days.

Asunto(s)

Progesterona/química , Progestinas/química , Cristalización , Espectroscopía de Resonancia Magnética , Difracción de Polvo , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Difracción de Rayos X

RESUMEN

Solid dispersions of saquinavir mesylate containing either Gelucire® 44/14 or poly(ethylene glycol) (PEG) 4000, or mixtures of each carrier with Tween 80 or polyvinyl pyrrolidone (PVP) K30 were prepared in order to enhance the drug dissolution rate. These systems were prepared by the melting method and characterized by X-ray powder diffraction, microscopical techniques, and Raman spectroscopy aiming to establish a relationship between physicochemical and dissolution properties under different cooling conditions. Modifications in degree of crystalline order/disorder over time were observed in preparations with both carriers. Overall, formulations cooled and stored at -20 °C showed less variation in dissolution rates than those at 25 °C. Although Tween 80 has enhanced the known self-emulsifying properties of Gelucire® 44/14, its combination with PEG 4000 displayed miscibility problems. The addition of PVP K30 was not the most effective approach in enhancing the dissolution in early steps; however, the drug dissolution was stable after 7 days of storage at 25 °C. The combination of PEG 4000 and PVP K30 maintained the dissolution properties for 60 and 90 days at 25 °C/95% relative humidity and 40 °C/75% (f2 values >50), respectively.

Asunto(s)

Portadores de Fármacos/química , Emulsionantes/química , Inhibidores de la Proteasa del VIH/química , Polietilenglicoles/química , Saquinavir/química , Solventes/química , Fenómenos Químicos , Química Farmacéutica , Cromatografía Líquida de Alta Presión , Portadores de Fármacos/administración & dosificación , Estabilidad de Medicamentos , Emulsiones , Excipientes/química , Inhibidores de la Proteasa del VIH/administración & dosificación , Cinética , Microscopía Electrónica de Rastreo , Polisorbatos/química , Povidona/química , Difracción de Polvo , Saquinavir/administración & dosificación , Solubilidad , Espectrometría Raman

RESUMEN

Terbinafine hydrochloride (TH), a poorly water soluble antifungal agent, was characterized by solid state techniques including differential scanning calorimetry, thermogravimetry, X-ray powder diffraction, optical and electron microscopies, Fourier transform infrared, Raman and solid-state nuclear magnetic resonance spectroscopies and intrinsic dissolution rate (IDR). A colorless single crystal of TH was grown from an ethanol:water solution and its crystalline structure was determined through X-ray single crystal diffraction. Also, a new crystal habit of TH was obtained through the slow solvent evaporation technique revealing a needle-like shape. A comparison between the IDR results for the TH raw material and TH needle-like crystal revealed lower values for the new crystal habit, which can be attributed to the preferential orientation of the crystals in the compressed disks.

Asunto(s)

Naftalenos/química , Rastreo Diferencial de Calorimetría , Microscopía Electrónica de Rastreo , Difracción de Polvo , Solubilidad , Análisis Espectral , Terbinafina

RESUMEN

Due to the physical-chemical and therapeutic impacts of polymorphism, its monitoring in raw materials is necessary. The purpose of this study was to develop and validate a quantitative method to determine the polymorphic content of nimodipine (NMP) raw materials based on differential scanning calorimetry (DSC). The polymorphs required for the development of the method were characterized through DSC, X-ray powder diffraction (XRPD) and Raman spectroscopy and their polymorphic identity was confirmed. The developed method was found to be linear, robust, precise, accurate and specific. Three different samples obtained from distinct suppliers (NMP 1, NMP 2 and NMP 3) were firstly characterized through XRPD and DSC as polymorphic mixtures. The determination of their polymorphic identity revealed that all samples presented the Modification I (Mod I) or metastable form in greatest proportion. Since the commercial polymorph is Mod I, the polymorphic characteristic of the samples analyzed needs to be investigated. Thus, the proposed method provides a useful tool for the monitoring of the polymorphic content of NMP raw materials.

Asunto(s)

Bloqueadores de los Canales de Calcio/química , Rastreo Diferencial de Calorimetría , Nimodipina/química , Análisis de Varianza , Calibración , Rastreo Diferencial de Calorimetría/normas , Cristalización , Cristalografía por Rayos X , Límite de Detección , Modelos Lineales , Difracción de Polvo , Reproducibilidad de los Resultados , Espectrometría Raman