RESUMEN
The main aim of this study was to investigate the properties of an AZ91 alloy coated with nanostructured hydroxyapatite (HA) prepared by radio frequency (RF) magnetron sputtering. The bioactivity and biomineralization of the AZ91 magnesium alloy coated with HA were investigated in simulated body fluid (SBF) via an in vitro test. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analyses were performed. The samples were immersed in SBF to study the ability of the surface to promote the formation of an apatite layer as well as corrosion resistance and mass change of the HA-coated AZ91 alloy. Electrochemical tests were performed to estimate the corrosion behaviour of HA-coated and uncoated samples. The results revealed the capability of the HA coating to significantly improve the corrosion resistance of the uncoated AZ91 alloy.
Asunto(s)
Aleaciones/química , Materiales Biocompatibles Revestidos/química , Durapatita/química , Magnesio/química , Nanoestructuras/química , CorrosiónRESUMEN
Biodegradable metals and alloys are promising candidates for biomedical bone implant applications. However, due to the high rate of their biodegradation in human body environment, they should be coated with less reactive materials, such, for example, as bioactive glasses or glass-ceramics. Fort this scope, RKKP composition glass-ceramic coatings have been deposited on Mg-Ca(1.4wt%) alloy substrates by Pulsed Laser Deposition method, and their properties have been characterized by a number of techniques. The prepared coatings consist of hydroxyapatite and wollastonite phases, having composition close to that of the bulk target material used for depositions. The 100µm thick films are characterized by dense, compact and rough morphology. They are composed of a glassy matrix with various size (from micro- to nano-) granular inclusions. The average surface roughness is about 295±30nm due to the contribution of micrometric aggregates, while the roughness of the fine-texture particulates is approximately 47±4nm. The results of the electrochemical corrosion evaluation tests evidence that the RKKP coating improves the corrosion resistance of the Mg-Ca (1.4wt%) alloy in Simulated Body Fluid.
Asunto(s)
Aleaciones/química , Sustitutos de Huesos/química , Calcio/química , Cerámica/química , Materiales Biocompatibles Revestidos/química , Vidrio/química , Implantes Experimentales , Magnesio/química , HumanosRESUMEN
In this research work, the synthesis of Ag doped hydroxyapatite coatings for dental or orthopedic implants was performed. The main goal was to determine the influence of Ag content on the roughness and antimicrobial performance of the prepared thin films. The films were deposited on Ti6Al4V alloy by means of RF magnetron sputtering. Those coatings were characterized by X-ray diffraction (XRD) and 3D surface profilometry. The antifungal activity after 1 and 7days of culture was evaluated in the presence of Candida albicans (ATCC - 10231). The increase of Ag content increased roughness and reduced the antifungal activity. The results showed that the Ag doped hydroxyapatite coatings can be a potential solution for the improvement of the antifungal activities of Ti based alloy.
Asunto(s)
Antifúngicos/farmacología , Candida albicans/efectos de los fármacos , Materiales Biocompatibles Revestidos/química , Durapatita/química , Plata/farmacología , Aleaciones , Antifúngicos/química , Candidiasis/microbiología , Materiales Biocompatibles Revestidos/farmacología , Implantes Dentales , Durapatita/farmacología , Campos Electromagnéticos , Prótesis e Implantes , Plata/análisis , Plata/química , Propiedades de Superficie , Titanio/químicaRESUMEN
In recent years, the smart materials have attracted much attention due to their unusual properties such as shape memory effect and pseudoelasticity, being widely used for biomedical implants. These materials contain certain amounts of nickel, titanium and others which are not adequate for surgical implants and prosthesis. In the work reported here, two types of nonostructured multilayer coatings (TiN/ZrN, ZrN/Zr) used to prevent the ions release from shape memory alloys were investigated. For comparison, the TiN and ZrN monolayers were also examined. The films were deposited onto nickel-titanium based alloy (Ti-Ni-Nb) and Ni substrates by vacuum arc deposition technique under various deposition conditions. The concentrations of dissolved ions in Ringer solution for uncoated and coated Ni samples were determined to examine the benefic barrier effect of these coatings for ions release from shape memory alloys. In order to have a more complete characterization of the investigated coatings, other properties such as elemental and phase composition, morphology, texture, microhardness, and adhesion were studied. For all coatings, the concentrations of dissolved ions were lower that those measured in the case of the uncoated specimens. The nanostructured multilayer films exhibited the best mechanical and anticorrosive properties.