RESUMEN

Adsorbents for hydrogen-bond accepting chemicals such as organophosphates are developed by post-synthetically modifying UiO-66-NH2 through two analogous condensation reactions to incorporate hydrogen-bond donating adsorbent groups. When benzaldehydes are employed as coupling partners, the resulting imine-functionalized MOFs show improvements in uptake capacity with increasingly electron-deficient adsorbent groups. By contrast, when the coupling partners are benzoic acids, the resulting amide-functionalized MOFs exhibit improvements in uptake capacity with increasingly electron-rich adsorbent groups. Both modification approaches also increase binding affinity for organophosphates relative to unmodified UiO-66-NH2, demonstrating successful modification of the MOF scaffold to create adsorbents for hazardous chemicals.

RESUMEN

Organocatalyzed atom transfer radical polymerization (O-ATRP) is a controlled radical polymerization method mediated by organic photoredox catalysts (PCs) for producing polymers with well-defined structures. While N,N-diaryl dihydrophenazine PCs have successfully produced polymers with low dispersity (D < 1.3) in O-ATRP, low initiator efficiencies (I* ~ 60-80%) indicate an inability to achieve targeted molecular weights and have been attributed to the addition of radicals to the PC core. In this work, we measure the rates of alkyl core substitution (AkCS) to gain insight into why PCs differing in N-aryl group connectivity exhibit differences in polymerization control. Additionally, we evaluate how PC properties evolve during O-ATRP when a non-core-substituted PC is used. PC 1 with 1-naphthyl groups in the N-aryl position resulted in faster AkCS (k 1 = 1.21 ± 0.16 × 10-3 s-1, k 2 = 2.04 ± 0.11 × 10-3 s-1) and better polymerization control at early reaction times as indicated by plots of molecular weight (number average molecular weight = M n) vs conversion compared to PC 2 with 2-naphthyl groups (k 1 = 6.28 ± 0.38 × 10-4 s-1, k 2 = 1.15 ± 0.07 × 10-3 s-1). The differences in rates indicate that N-aryl connectivity can influence polymerization control by changing the rate of AkCS PC formation. The rate of AkCS increased from the initial to the second substitution, suggesting that PC properties are modified by AkCS. Increased PC radical cation (PC•+) oxidation potentials (E 1/2 = 0.26-0.27 V vs SCE) or longer triplet excited-state lifetimes (τ T1 = 1.4-33 µs) for AkCS PCs 1b and 2b compared to parent PCs 1 and 2 (E 1/2 = 0.21-0.22 V vs SCE, τ T1 = 0.61-3.3 µs) were observed and may explain changes to PC performance with AkCS. Insight from evaluation of the formation, properties, and performance of AkCS PCs will facilitate their use in O-ATRP and in other PC-driven organic transformations.

RESUMEN

Phenochalcogenazines such as phenoxazines and phenothiazines have been widely employed as photoredox catalysts (PCs) in small molecule and polymer synthesis. However, the effect of the chalcogenide in these catalysts has not been fully investigated. In this work, a series of four phenochalcogenazines is synthesized to understand how the chalcogenide impacts catalyst properties and performance. Increasing the size of the chalcogenide is found to distort the PC structure, ultimately impacting the properties of each PC. For example, larger chalcogenides destabilize the PC radical cation, possibly resulting in catalyst degradation. In addition, PCs with larger chalcogenides experience increased reorganization during electron transfer, leading to slower electron transfer. Ultimately, catalyst performance is evaluated in organocatalyzed atom transfer radical polymerization and a photooxidation reaction for C(sp2)-N coupling. Results from these experiments highlight that a balance of PC properties is most beneficial for catalysis, including a long-lived excited state, a stable radical cation, and a low reorganization energy.

RESUMEN

Organocatalyzed atom transfer radical polymerization (O-ATRP) is a method of producing polymers with precise structures under mild conditions using organic photoredox catalysts (PCs). Due to the unknown toxicity of PCs and their propensity to introduce color in polymers synthesized by this method, removal of the PC from the polymer product can be important for certain applications of polymers produced using O-ATRP. Current purification methods largely rely on precipitation to remove the PC from the polymer, but a more effective and efficient purification method is needed. In this work, an alternative purification method relying on oxidation of the PC to PC · + followed by filtration through a plug to remove PC · + from the polymer and removal of the volatiles was developed. A range of chemical oxidants and stationary phases were tested for their ability to remove PCs from polymers, revealing chemical oxidation by N-bromosuccinimide followed by a filtration through a silica plug can remove up to 99% of the PC from poly(methyl methacrylate). Characterization of the polymer before and after purification demonstrated that polymer molecular weight, dispersity, and chain-end fidelity are not signficantly impacted by this purification method. Finally, this purification method was tested on a range of dihydrophenazine, phenoxazine, dihydroacridines, and phenothiazine PCs, revealing the strength of the chemical oxidant must match the oxidation potential of the PC for effective purification.

RESUMEN

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Asunto(s)

RESUMEN

Photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) is a controlled radical polymerization methodology catalyzed by organic photoredox catalysts (PCs). In an efficient O-ATRP system, good control over molecular weight with an initiator efficiency (I* = M n,theo/M n,exp × 100%) near unity is achieved, and the synthesized polymers possess a low dispersity (D). N,N-Diaryl dihydrophenazine catalysts typically produce polymers with low dispersity (D < 1.3) but with less than unity molecular weight control (I* ~ 60-80%). This work explores the termination reactions that lead to decreased control over polymer molecular weight and identifies a reaction leading to radical addition to the phenazine core. This reaction can occur with radicals generated through reduction of the ATRP initiator or the polymer chain end. In addition to causing a decrease in I*, this reactivity modifies the properties of the PC, ultimately impacting polymerization control in O-ATRP. With this insight in mind, a new family of core-substituted N,N-diaryl dihydrophenazines is synthesized from commercially available ATRP initiators and employed in O-ATRP. These new core-substituted PCs improve both I* and D in the O-ATRP of MMA, while minimizing undesired side reactions during the polymerization. Further, the ability of one core-substituted PC to operate at low catalyst loadings is demonstrated, with minimal loss of polymerization control down to 100 ppm (weight average molecular weight [M w] = 10.8 kDa, D = 1.17, I* = 104% vs M w = 8.26, D = 1.10, I* = 107% at 1000 ppm) and signs of a controlled polymerization down to 10 ppm of the catalyst (M w = 12.1 kDa, D = 1.36, I* = 107%).

RESUMEN

Radical cations of photoredox catalysts used in organocatalyzed atom transfer radical polymerization (O-ATRP) have been synthesized and investigated to gain insight into deactivation in O-ATRP. The stability and reactivity of these compounds were studied in two solvents, N,N-dimethylacetamide and ethyl acetate, to identify possible side reactions in O-ATRP and to investigate the ability of these radical cations to deactivate alkyl radicals. A number of other factors that could influence deactivation in O-ATRP were also probed, such as ion pairing with the radical cations, radical cation oxidation potential, and halide oxidation potential. Ultimately, these studies enabled radical cations to be employed as reagents during O-ATRP to demonstrate improvements in polymerization control with increasing radical cation concentrations. In the polymerization of acrylates, this approach enabled superior molecular weight control, a decrease in polymer dispersity from 1.90 to 1.44, and an increase in initiator efficiency from 78 to 102%. This work highlights the importance of understanding the mechanism and side reactions of O-ATRP, as well as the importance of catalyst radical cations for successful O-ATRP.

RESUMEN

Core-modified N-alkyl phenoxazines were synthesized and evaluated as photoredox catalysts (PCs) in organocatalyzed atom transfer radical polymerization (O-ATRP). Each PC was characterized and found to strongly absorb UVA and visible light, undergo reversible oxidation to radical cation species, and exhibit high quantum yields of fluorescence (Φf > 77%). PCs found to exhibit intramolecular charge transfer in their excited state were capable of the controlled synthesis of poly(methyl methacrylate) with good molecular weight control (I* ~ 100%) and moderately low dispersity (D < 1.30).

RESUMEN

Organocatalyzed ATRP (O-ATRP) is a growing field exploiting organic chromophores as photoredox catalysts (PCs) that engage in dissociative electron-transfer (DET) activation of alkyl-halide initiators following absorption of light. Characterizing DET rate coefficients (kact) and photochemical yields across various reaction conditions and PC photophysical properties will inform catalyst design and efficient use during polymerization. The studies described herein consider a class of phenoxazine PCs, where synthetic handles of core substitution and N-aryl substitution enable tunability of the electronic and spin characters of the catalyst excited state as well as DET reaction driving force (ΔGET0). Using Stern-Volmer quenching experiments through variation of the diethyl 2-bromo-2-methylmalonate (DBMM) initiator concentration, collisional quenching is observed. Eight independent measurements of kact are reported as a function of ΔGET0 for four PCs: four triplet reactants and four singlets with kact values ranging from 1.1 × 108 M-1 s-1, where DET itself controls the rate, to 4.8 × 109 M-1 s-1, where diffusion is rate-limiting. This overall data set, as well as a second one inclusive of five literature values from related systems, is readily modeled with only a single parameter of reorganization energy under the frameworks of the adiabatic Marcus electron-transfer theory and Marcus-Savéant theory of DET. The results provide a predictive map where kact can be estimated if ΔGET0 is known and highlight that DET in these systems appears insensitive to PC reactant electronic and spin properties outside of their impact on the driving force. Next, on the basis of measured kact values in selected PC systems and knowledge of their photophysics, we also consider activation yields specific to the reactant spin states as the DBMM initiator concentration is varied. In N-naphthyl-containing PCs characterized by near-unity intersystem crossing, the T1 is certainly an important driver for efficient DET. However, at DBMM concentrations common to polymer synthesis, the S1 is also active and drives 33% of DET reaction events. Even in systems with low yields of ISC, such as in N-phenyl-containing PCs, reaction yields can be driven to useful values by exploiting the S1 under high DBMM concentration conditions. Finally, we have quantified photochemical reaction quantum yields, which take into account potential product loss processes after electron-transfer quenching events. Both S1 and T1 reactant states produce the PC•+ radical cation with a common yield of 71%, thus offering no evidence for spin selectivity in deleterious back electron transfer. The subunity PC•+ yields suggest that some combination of solvent (DMAc) oxidation and energy-wasting back electron transfer is likely at play and these pathways should be factored in subsequent mechanistic considerations.

RESUMEN

An electrochemical variant of organocatalyzed atom transfer radical polymerization (O-ATRP) is developed and investigated. Inspired by electrochemically mediated atom transfer radical polymerization (eATRP), potentiostatic electrolysis is used to manipulate the catalyst's redox states in O-ATRP to understand whether deactivation in O-ATRP can be enhanced to improve polymerization control. During the course of this work, several possible side reactions are investigated, and the electrochemical apparatus is optimized to reduce side reactions at the counter electrode. This electrochemically modified O-ATRP method (eO-ATRP) is then studied at different applied potentials, under different irradiation conditions, and with two photoredox catalysts to understand the impact of electrolysis on polymerization control. Ultimately, although electrolysis was successfully used to improve polymerization control in O-ATRP, some additional challenges have been identified. Several key questions are postulated to guide future work in this area.

RESUMEN

The application of photoredox catalysis to atom-transfer radical polymerization (ATRP) has resulted in the development of strongly reducing organic photoredox catalysts (PCs) that are some of the most reducing catalysts known. The objectives of this review are to highlight these PCs with regard to their development and applications in polymer and organic synthesis, as well illuminate aspects of these PCs that remain to be studied further.