RESUMEN

We report here on the development and application of a submersible, compact, low power consumption, integrated multichannel trace metal sensing probe (TracMetal). This probe is unique in that it allows high-resolution, simultaneous in-situ measurements of the potentially bioavailable (so-called dynamic) fraction of Hg(II), As(III), Cd(II), Pb(II), Cu(II), Zn(II). The TracMetal incorporates nanostructured Au-plated and Hg-plated gel-integrated microelectrode arrays. In addition to be selective to the fraction of metal potentially bioavailable, they offer protection against fouling and ill-controlled convective interferences. Sensitivities in the low pM for Hg(II) and sub-nM for the other target trace metals is achieved with precision ≤ 12%. The TracMetal is capable of autonomous operation during deployment, with routines for repetitive measurements (1-2 h-1), data storage and management, data computer visualization, and wireless data transfer. The system was successfully applied in the Arcachon Bay, to study the temporal variation of the dynamic fraction of the trace metals targeted. The in situ autonomous TracMetal measurements were combined with in situ measurements of the master bio-physicochemical parameters and sample collection for complementary measurements of the dissolved metal concentrations, organic matter concentrations and proxy for biological activities. The integration of all data revealed that various biotic and abiotic processes control the temporal variation of the dynamic fractions of the target metals (Medyn). The difference in the percentage of the dynamic forms of the metals studied and the short-term processes influencing their variation highlight the TracMetal potentiality as metal bioavailability-assessment sentinel to achieve comprehensive environmental monitoring of dynamic aquatic systems.

Asunto(s)

RESUMEN

The occurrence and intensity of (harmful) algal blooms (HABs) have increased through the years due to rapidly changing environmental conditions. At the same time, the demand for low-cost instrumentation has increased substantially, enabling the real-time monitoring and early-stage detection of HABs. To meet this challenge, we have developed a compact multi-wavelength fluorometer for less than 400 USD. This is possible by using readily available and low-cost optical and electronic components. Its modular design results in a highly versatile and flexible monitoring tool. The algae detection module enables a continuous identification and control of relevant algal groups based on their spectral characteristics with a detection limit of 10 cells per liter. Besides its usage as a benchtop module in the laboratory, the algae module has been integrated into submersible housings and applied in coastal environments. During its first in situ application in the Port of Genoa, seawater samples of mixed algal composition were used to demonstrate the successful discrimination of cyanobacteria and dinophytes as well-known toxin producing classes. Fabrication, operation, and performance as well as its first in situ application are addressed.

Asunto(s)

RESUMEN

A new submersible probe for the in situ detection of nitrate, nitrite, and chloride in seawater is presented. Inline coupling of a desalination unit, an acidification unit, and a sensing flow cell containing all-solid-state membrane electrodes allows for the potentiometric detection of nitrate and nitrite after removal of the key interfering ions in seawater, chloride and hydroxide. Thus, the electrodes exhibited attractive analytical performances for the potentiometric detection of nitrate and nitrite in desalinated and acidified seawater: fast response time ( t95 < 12 s), excellent stability (long-term drifts of <0.5 mV h-1), good reproducibility (calibration parameter deviation of <3%), and satisfactory accuracy (uncertainties <8%Diff compared to reference technique). The desalination cell, which can be repetitively used for about 30 times, may additionally be used as an exhaustive, and therefore calibration-free, electrochemical sensor for chloride and indirect salinity detection. The detection of these two parameters together with nitrate and nitrite may be useful for the correlation of relative changes in macronutrient levels with salinity cycles, which is of special interest in recessed coastal water bodies. The system is capable of autonomous operation during deployment, with routines for repetitive measurements (every 2 h), data storage and management, and computer visualization of the data in real time. In situ temporal profiles observed in the Arcachon Bay (France) showed valuable environmental information concerning tide-dependent cycles of nitrate and chloride levels in the lagoon, which are here observed for the first time using direct in situ measurements. The submersible probe based on membrane electrodes presented herein may facilitate the study of biogeochemical processes occurring in marine ecosystems by the direct monitoring of nitrate and nitrite levels, which are key chemical targets in coastal waters.