RESUMEN

This study systematically investigates how polymer composition changes nanoparticle (NP) grafting and diffusion in solvated random copolymer thin films. By thermal annealing from 135 to 200 °C, thin films with a range of hydrophobicity are generated by varying acrylic acid content from 2% (SAA2) to 29% (SAA29). Poly(styrene-random-tert butyl acrylate) films, 100 nm thick, that are partially converted to poly(styrene-random-acrylic acid), SAA, reversibly swell in ethanol solutions containing amine-functionalized SiO2 nanoparticles with a diameter of 45 nm. The thermodynamics and kinetics of NP grafting are directly controlled by the AA content in the SAA films. At low AA content, namely SAA4, NP attachment saturates at a monolayer, consistent with a low solubility of NPs in SAA4 due to a weakly negative χ parameter. When the AA content exceeds 4%, NPs sink into the film to form multilayers. These films exhibit hierarchical surface roughness with a RMS roughness greater than the NP size. Using a quartz crystal microbalance, NP incorporation in the film is found to saturate after a mass equivalence of about 3 close-packed layers of NPs have been incorporated within the SAA. The kinetics of NP grafting is observed to scale with AA content. The surface roughness is greatest at intermediate times (5-20 min) for SAA13 films, which also exhibit superhydrophobic wetting. Because clustering and aggregation of the NPs within SAA29 films reduce film transparency, SAA13 films provide both maximum hydrophobicity and transparency. The method in this study is widely applicable because it can be applied to many substrate types, can cover large areas, and retains the amine functionality of the particles which allows for subsequent chemical modification.

Asunto(s)

RESUMEN

Polymer-based nanogel formulations offer features attractive for drug delivery, including ease of synthesis, controllable swelling and viscoelasticity as well as drug loading and release characteristics, passive and active targeting, and the ability to formulate nanogel carriers that can respond to biological stimuli. These unique features and low toxicity make the nanogels a favorable option for vascular drug targeting. In this review, we address key chemical and biological aspects of nanogel drug carrier design. In particular, we highlight published studies of nanogel design, descriptions of nanogel functional characteristics and their behavior in biological models. These studies form a compendium of information that supports the scientific and clinical rationale for development of this carrier for targeted therapeutic interventions.

RESUMEN

The main objective of this paper was to investigate the effect of transmission of force on bone cells that were attached to a deformable membrane. We functionalized a silastic membrane that measured 0.005 inches thickness and coated it with an extra cellular matrix (ECM) protein, fibronectin (FN). MC3T3-E1 osteoblast-like cells were cultured on the functionalized FN-coated membrane after which cell attachment and proliferation were evaluated. We observed an immediate attachment and proliferation of the bone cells on the functionalized membrane coated with FN, after 24 hours. Upon application of a mechanical force to cells cultured on the functionalized silicone membrane in the form of a dynamic equibiaxial strain, 2% magnitude; at 1-Hz frequency for 2 h, the osteoblast cells elicited slightly elevated phalloidin fluorescence, suggesting that there was reorganization of the cytoskeleton. We concluded from this preliminary data obtained that the engineered surface transduced applied mechanical forces directly to the adherent osteoblast cells via integrin binding tripeptide receptors, present in the FN molecules, resulting in the enhanced cellular attachment and proliferation.

RESUMEN

Bioactive glass (BG) can directly bond to living bone without fibrous tissue encapsulation. Key mechanistic steps of BG's activity are attributed to calcium phosphate formation, surface hydroxylation and fibronectin (FN) adsorption. In the present study, self-assembled monolayers (SAMs) of alkanesilanes with different surface chemistry (OH, NH(2) and COOH) were used as a model system to mimic BG's surface activity. Calcium phosphate (Ca-P) was formed on SAMs by immersion in a solution that simulates the electrolyte content of physiological fluids. FN adsorption kinetics and monolayer coverage was determined on SAMs with or without Ca-P coating. The surface roughness was also examined on these substrates before and after FN adsorption. The effects of FN-adsorbed, Ca-P-coated SAMs on the function of MC3T3-E1 were evaluated by cell growth, expression of alkaline phosphatase activity and actin cytoskeleton formation. We demonstrate that, although the FN monolayer coverage and the root mean square (rms) roughness are similar on --OH and --COOH terminated SAMs with or without Ca-P coating, higher levels of ALP activity, more actin cytoskeleton formation and more cell growth are obtained on --OH- and --COOH-terminated SAMs with Ca-P coating. In addition, although the FN monolayer coverage is higher on Ca-P-coated --NH(2)-terminated SAMs and SiO(x) surfaces, higher levels of ALP activity and more cell growth are obtained on Ca-P-coated --OH- and --COOH-terminated SAMs. Thus, with the same Ca-P coatings, different surface functional groups have different effects on the function of osteoblastic cells. These findings represent new insights into the mechanism of bioactivity of BG and thereby may lead to designing superior constructs for bone grafting.

Asunto(s)

RESUMEN

The migration of vascular endothelial cells under flow can be modulated by the addition of chemical or mechanical stimuli. The aim of this study was to investigate how topographic cues derived from a substrate containing three-dimensional microtopography interact with fluid shear stress in directing endothelial cell migration. Subconfluent bovine aortic endothelial cells were seeded on fibronectin-coated poly(dimethylsiloxane) substrates patterned with a combinatorial array of parallel and orthogonal microgrooves ranging from 2 to 5 microm in width at a constant depth of 1 microm. During a 4-h time-lapse observation in the absence of flow, the majority of the prealigned cells migrated parallel to the grooves with the distribution of their focal adhesions (FAs) depending on the groove width. No change in this migratory pattern was observed after the cells were exposed to moderate shear stress (13.5 dyn/cm(2)), irrespective of groove direction with respect to flow. After 4-h exposure to high shear stress (58 dyn/cm(2)) parallel to the grooves, the cells continued to migrate in the direction of both grooves and flow. By contrast, when microgrooves were oriented perpendicular to flow, most cells migrated orthogonal to the grooves and downstream with flow. Despite the change in the migration direction of the cells under high shear stress, most FAs and actin microfilaments maintained their original alignment parallel to the grooves, suggesting that topographic cues were more effective than those derived from shear stress in guiding the orientation of cytoskeletal and adhesion proteins during the initial exposure to flow.

Asunto(s)

RESUMEN

A major cause of implant failure in skeletal tissues is failure of osseointegration, often due to lack of adhesion of cells to the titanium (Ti) alloy interface. Since arginine-glycine-aspartic acid (RGD)-containing peptides have been shown to regulate osteoblast adhesion, we tested the hypothesis that, bound to a Ti surface, these peptides would promote osteoblasts differentiation, while at the same time inhibit apoptosis. RGDS and RGES (control) peptides were covalently linked to Ti discs using an APTS linker. While the grafting of both RGDS and RGES significantly increased Ti surface roughness, contact angle analysis showed that APTS significantly increased the surface hydrophobicity; when the peptides were tethered to Ti, this was reduced. To evaluate attachment, MC3T3-E1 osteoblast cells were grown on these discs. Significantly more cells attached to the Ti-grafted RGDS then the Ti-grafted RGES control. Furthermore, expression of the osteoblasts phenotype was significantly enhanced on the Ti-grafted RGDS surface. When cells attached to the Ti-grafted RGDS were challenged with staurosporine, an apoptogen, there was significant inhibition of apoptosis; in contrast, osteoblasts adherent to the Ti-grafted RGES were killed. It is concluded that RGD-containing peptides covalently bonded to Ti promotes osteoblasts attachment and survival with minimal changes to the surface of the alloy. Therefore, such modifications to Ti would have the potential to promote osseointegration in vivo.

Asunto(s)

RESUMEN

Upon implantation, calcium phosphate (Ca-P) surfaces form on materials that are bone bioactive. In this study, the evolving surface characteristics associated with calcium phosphate precipitation are modeled using self-assembled monolayers (SAMs), in a one-step nucleation process. SAMs were used to create amine (-NH2), carboxyl (-COOH) and hydroxyl (-OH) functionalized surfaces by grafting 3-aminopropyltriethoxysilane, 3-triethoxysilylpropyl succinic anhydride and glycidoxypropyl tri-methoxysilane, respectively, onto oxidized silicon wafers. The SAM surfaces were characterized using ellipsometry to establish the presence of grafted molecules. On the surfaces incubated in simulated physiological fluids for 7 days, the thickness of Ca-P layer grew slowly over the first few hours, increasing strongly between 1 and 5 days and then slowed down again. FTIR showed the dependence of calcium phosphate morphology on the type of surface groups, with stronger P-O bands seen on the OH-terminated surface. SEM analysis showed dispersed Ca-P precipitates on the -COOH and -OH terminated surfaces after 1 day immersion. After 7 days, all SAM surfaces were covered with uniformly dispersed and denser Ca-P precipitates. The underlying Ca-P layer showed cracks on the -NH2-terminated surface. Rutherford backscattering spectrometry (RBS) data analysis confirmed that Ca/P ratio is in excellent agreement with the theoretical value of 1.67 for hydroxyapatite. X-ray diffraction (XRD) analysis also showed evidence of apatite formation on all the surfaces, with stronger evidence on the -OH-terminated surface. Highly porous Ca-P precipitates were observed on the SAM surfaces portrayed by the AFM scans with nanoscale RMS roughness. Thus, using highly controlled surface chemistry, under physiological conditions, in vitro, this study demonstrates that a hydroxylated surface enhances Ca-P nucleation and growth relative to other surfaces, thereby supporting the concept of its beneficial effect on bone tissue formation and growth.

Asunto(s)

RESUMEN

Using neutron reflectometry, the adsorption of diblock copolymers from a neutral polystyrene (PS) matrix is studied as a function of substrate type and non-adsorbing block degree of polymerization. The block copolymer is poly(deutero styrene)-block-poly(methyl methacrylate) and the substrates are silicon oxide, SiO(x), and SiO(x) functionalized with (3-aminopropyl)triethoxysilane (APTES). We have determined the equilibrium volume fraction-depth profiles for such films, and compared them with volume fraction profiles generated by self-consistent mean-field (SCMF) theory and find good agreement between the experimental and theoretical data. SCMF calculations show that the segmental interaction energy between PS matrix chains and APTES is two orders of magnitude stronger than that between PS and SiO(x).

RESUMEN

Cell adhesion to biomaterials is a prerequisite for tissue integration with the implant surface. Herein, we show that we can generate a model silica surface that contains a minimal-length arginine-glycine-aspartic acid (RGD) peptide that maintains its biological activity. In the first part of this study, attachment of MC3T3-E1 osteoblast-like cells was investigated on silicon oxide, amine terminated substrates [i.e., 3-aminopropyl triethoxysilane (APTS)], grafted RGD, and physisorbed RGD control. The APTS layer exhibited nanoscale roughness and presented amine functional groups for grafting a minimal RGD tripeptide devoid of any flanking groups or spacers. Contact angle measurements indicated that the hydrophobicity of the APTS surface was significantly lower than that of the surface with grafted RGD (RGD-APTS). Atomic force microscopy showed that surfaces covered with RGD-APTS were smoother (Ra = 0.71 nm) than those covered with APTS alone (Ra = 1.59 nm). Focusing mainly on cell morphology, experiments showed that the RGD-APTS hybrid provided an optimum surface for cell adhesion, spreading, and cytoskeletal organization. Discrete focal adhesion plaques were also observed consistent with successful cell signaling events. In a second set of experiments, smooth, monolayers of APTS (Ra = 0.1 nm) were used to prepare arginine-glycine-aspartic acid-serine (RGDS)-APTS and arginine-glycine-glutamic acid-serine (RGES)-APTS (control) substrates. Focusing mainly on cell function, integrin and gene expression were all enhanced for rate osteosarcoma cells on surfaces containing grafted RGDS. Both sets of studies demonstrated that grafted molecules of RGD(S) enhance both osteoblast-like cell adhesion and function.

Asunto(s)

RESUMEN

The existence of a transient period during the surface enrichment of a binary polymer blend by one of its components has been suggested by previous theoretical and experimental studies as well as computer simulations. Taking advantage of the high depth resolution of neutron reflectivity and the slow dynamics of polymers near their glass transition, we investigate this early-stage surface compositional enrichment in a phase separating polymer blend for the first time. Two stages of surface enrichment layer growth are observed. A rapid local surface enrichment at the chain segmental level occurs first, followed by a slower growth of a diffuse layer having a scale on the order of the bulk correlation length and the radius of gyration of the surface enriching polymer chains.

RESUMEN

The major objective of this work was to attach bone cells to a deformable surface for the effective transmission of force. We functionalized a silastic membrane and treated it with 3-aminopropyltriethoxysilane (APTS). A minimal RGD peptide was then covalently linked to the aminated surface. MC3T3-E1 osteoblast-like cells were cultured on the arginine-glycine-aspartic acid (RGD)-treated membrane for 3-15 days and cell attachment and proliferation was evaluated. We observed that cells were immediately bound to the membrane and proliferated. After 8 days on the material surface, osteoblasts exhibited high levels of ALP staining, indicating that the cells were undergoing maturation. Alizarin red staining and Fourier transform infrared (FTIR) analysis showed that the mineral formed by the cells was a biological apatite. The second objective was to apply a mechanical force to cells cultured on the modified silicone membrane. Dynamic equibiaxial strain, 2% magnitude, and a 0.25-Hz frequency were applied to bone cells for 2 h. Osteoblasts elicited increased phalloidin fluorescence, suggesting that there was reorganization of the cytoskeleton. Furthermore, the applied strain elicited increased expression of the alpha(v)beta3 integrin receptor. We concluded that the covalent binding of RGD peptides to a silicone membrane provides a compatible surface for the attachment and subsequent differentiation of osteoblasts. Moreover, the engineered surface transduces applied mechanical forces directly to the adherent cells via integrin receptors.

Asunto(s)

RESUMEN

Upon lateral confinement, a critical polymer-blend film at 200 degrees C has been directed to form tube, capsule, confined domain, and multiple domain configurations. A phase-morphology map is produced by varying the confinement width ( W) and film thickness ( h(0)), and interpreted using a single pore model. Using the known correlation length, capsule length, and W, the boundary, in terms of W/h(0), between configurations is predicted and found to be in good agreement with experiment. This morphology map has potential applications for microencapsulating drugs and self-assembled conducting wires.

RESUMEN

Upon implantation, bioactive glass undergoes a series of reactions that leads to the formation of a calcium phosphate-rich layer. Most in vitro studies of the changes that occur on the surface of bioactive glass have employed the use of buffer solutions with compositions reflecting the ionic composition of interstitial fluid. Although these studies have documented the physical and chemical changes associated with bioactive glass immersed in aqueous media, they do not reveal the effect of serum proteins and cells that are present at the implantation site. In the present study, we document, using atomic force microscopy (AFM) and Rutherford backscattering spectrometry (RBS), significant differences in the reaction layer composition, thickness, morphology, and kinetics of formation arising from the presence of serum proteins. The data reveal that the uniform and rapid adsorption of serum proteins on the surface may serve to protect the surface from further direct interaction with the aqueous media, slowing down the transformation reactions. This finding is in agreement with previous studies that have shown that the presence of serum proteins significantly delays the formation of hydroxyapatite at the surface of bioactive glass. These data also support the hypothesis that initial reaction layers in vivo interact with cells in order to produce the tissue-bioactive glass interface typically observed on ex vivo specimens.

Asunto(s)

Asunto(s)